30Turbo Solutions Turbos CATALOG NUMBER 30 www.midwestwheel.com Order NLINE ™ www.midwestwheel.com Order NLINE ™ (Viewed from “Cold” side of turbo) (Viewed from “Hot” side of turbo) Excessive oil at compressor outlet Damage to compressor wheel Unusual noise Excessive oil or damage at turbine outlet Think your turbo is damaged? Check for these signs ALL REMAN TURBOS INCLUDE ACTUATOR WHERE APPLICABLE Many Applications Same Day Availability 100% Refundable Core Charge Genuine Parts Electronic Actuator 100% Calibrated State of the Art Testing Equipment Industry Trained/Technical Support 1 Year/Unlimited Miles Warranty 100% Customer Satisfaction Other applications available - see your salesman for details! WARRANTY POLICY All units remanufactured by Turbo Solutions LLC. are warranted against defects in our workmanship and materials. Remanufactured or New Turbochargers: 1 year and unlimited miles (from date of purchase). Warranty applies solely to the original purchaser and is not transferable. Warranty is expressly conditioned upon the covered unit being properly installed on vehicles approved by the OEM for such purposes. Warranty does not extend to unit failures due to: Improper installation or maintenance Lack of, low, incorrect, or contaminated lubricant Over temperature operation Foreign Object Impact Damage Failure to follow normal preventative maintenance of vehicle MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 August 2021 (30Turbo Solutions Turbos) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 30Turbo Solutions Turbos OE # 10R-8733 Manf. # 752538-0013 OE # 10R-1888 Manf. # 741155-0003 OE # 2080237 OE # 10R2028 OE # 3804502RX OE # 10R1103, 10R3280, 2283228, 228-3228, 228-3233, 269-2915, 269-2916, 269-2917, 269-2918, 269-2919, 269-2920, 269-2921, 269-2922, 269-2923, 269-2924, 269-2925, 269-2926 CAT ® CUMMINS ® Application: CAT C13 ACERT, High Pressure New P/N: TSO752538-0009N Application: CAT 15 ACERT, Low Pressure New P/N: TSO741155-0002N Application: Cummins M11 Reman P/N: TSORHH359044 New P/N: TSO3590044N Application: CAT C13 Low Pressure New P/N: TSO743279-0004N Application: C7 Reman P/N: TSORBM178046 Application: Cummins N14 New P/N: TSO3537074N OE# 0R7152 / 0R7923 0R7310 / 0R6989 0R7203 / 0R7223 0R6986 / 0R720 0R7299 / 166-6752 141-8937 / 124-3032 136-6390 / 146-4328 141-8939 / 124-3035 167-9271 / 196-5951 137-4832 Application: 3406C / 3406E New P/N: TSO177148N Manf. # 178046 HOLSET ® WITH ACTUATOR OE # 4352527RX Application: Holset Cummins HE431V 8.9L 2007-2012 Reman P/N: TSORHH3795634C Reman P/N: TSORHY5634C WITH ACTUATOR Application: Holset Cummins HE400VG MD11 13.0L 2007-2012 Reman P/N: TSORHH3776805C Reman P/N: TSORHY6805C OE # 21178033, 3769182, 85021418, 21424405, 85013598, 85151099, 85151093, 85141059 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 30Turbo Solutions Turbos HOLSET ® , continued WITH ACTUATOR Application: Cummins ISX HE561VE 2007-2013 Reman P/N: TSORHH3767616C Reman P/N: TSORHZ7616C OE # 4309077RX WITH ACTUATOR Application: Cummins HE451VE Reman P/N: TSORHH3796351C Reman P/N: TSORHY6351C OE # 4309273RX Application: Cummins HE351VE Reman P/N: TSORHM3795879C OE # 4352560RX Application: ISX Reman P/N: TSORHZ8264 Reman P/N: TSORHH3768264 Application: ISX Reman P/N: TSORHZ8263 Application: ISX Reman P/N: TSORHH5350503C Reman P/N: TSORHY0503C Application: HE561VE Reman P/N: TSORHH3767615C Reman P/N: TSORHZ615C Application: ISM Reman P/N: TSORHM4955397C OE # 4089551 OE # 2881993 / 4955305 OE # 2840007, 2841220, 2841222, 2843481, 2880004, 2881807, 2882004, 2882111, 28841220, 2882111RX, 8773568 OE # 4032760 / 4956010 4955425 / 4032673 4032066 / CPL-2732 OE # 2834847, 2837246, 2837247, 2839136, 2839148, 2839149, 4043429, 4044384, 4044385, 4047274, 4309451, 4955398, 4955397RX, 4309452 Manf. # 3768263 Manf. # 2841221, 3767306, 3773562, 3795281, 5350506 Manf. # 3767622 / 3774626 3792786 / 3774612 4042413 / 2840520 2838154 / 2836357 4045034 Manf. # 4955397 Manf. # 3768268 / 4043226 2843889 / 4035678 4043215 / 4045753 4036666 WITH ACTUATOR WITH ACTUATOR WITH ACTUATOR WITH ACTUATOR WITH ACTUATOR Application: Holset Cummins HE451VE ISL Industrial 2006-2014 Reman P/N: TSORHY0607C Application: Holset Cummins HE451VE ISX 15.0L 2010 Reman P/N: TSORHY6349C OE # 2080086RX, 2838786RX, 3775131RX, 3792242RX, 4040648RX, 5350607RX OE # 3777141RX, 3795157RX, 5350953RX, 5354723RX WITH ACTUATOR Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 30Turbo Solutions Turbos NAVISTAR ® Application: Maxxforce DT466 Reman P/N: TSORBM179035 Application: DT466/570 Reman P/N: TSORBM179030 Application: Maxxforce DT466 Reman P/N: TSORBM12639880001 OE # 1842337C95 / 1842337C91 1842337C92 / 1842337C93 1842337C94 / 1870932C94 1870932C93 / 1870932C92 1870932C91 / 5010314R94 OE # 1181102C91 / 1850493C91 1881102C93 / 5010720R91 1850493C91 / 1881102C92 1832666C91 / 1881104C91 1881104C93 / 1876116C94 1876116C92 / 187611C95 1876116C91 OE # 5010569R91 / 5010568R91 1871090C91 / 1850404C95 1871090C92 / 1871090C93 1832204C91 / 1832204C93 1832204C94 / 1832204C92 1831833C91 TURBO EXHAUST COVER Eliminate the need to use duct tape or rags in your exhaust. The turbo Exhaust Cover is meant to protect your turbo ® while transporting the equipment. Winds cause the turbo to spin and due to lack of lubrication, the bearings can be ruined. Reduces down time and repairs, plus you can re-use them. TLCSM7 Fits up to a 7" exhaust 13 1/2" Tall at highest point TLCSM12 Fits up to a 12" exhaust 15 1/2" Tall at Highest Point OE # 23528062 / 23525463 23528064 / 23528059 23528052 / 23528069 23528065 / 23526016 23522312 / 23526271 23522190 / 23526679 23526272 / 23522188 23522189 / 23529103 DETROIT DIESEL ® Application: Series 60 Reman P/N: TSORGH758204-9007 Application: Series 60 - K31 New P/N: TSO172743N Manf. # 53319707001 53319707101 Manf. # 758204-5007 OE # 23534361 OE # 23523197 Application: Series 60 EGR 12.7L/14L New P/N: TSO758204-0007N Application: Series 60 14L New P/N: TSO171702N Manf. # 466713-0006 OE # 098TC20173000, 098TC20195000, 23534361, R23534361, R23534775, R23534356, R23533775, R23532675, R23531103, 500\523 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 30Turbo Solutions Turbos VOLVO ® Application: MD11, MD13 Reman P/N: TSORHH3773446C Reman P/N: TSORHY3446C Manf. # 24512390 OE # 24512390 WITH ACTUATOR OE # 21358880 Application: MD13 Reman P/N: TSORHM2838746C Reman P/N: TSORHY8746C Manf. # 21358880 WITH ACTUATOR BORGWARNER OE # 5011058R91 Application: BorgWarner Maxxforce Reman P/N: TSORBH13879880004 Manf. # 13879880004 OE # 5011054R91 Application: BorgWarner Maxxforce Reman P/N: TSORBH12709880008 Manf. # 12709880008 OE # 13879880018 OE # 1870931C93, 1870931C94, 1842580C93, 1842216C91 OE # 006326, 3019414, 3032058, 3527693, 3529040, 3801613, 3801992, 3803279, 3803287, AR45428, 3801960RX, AR09476, AR51954, AR07606 Application: BorgWarner B3G | OM460LA New P/N: TSO13879880018 Application: BorgWarner S300V129 New P/N: TSO479032 Application: Borgwarner BHT3B 1993-2008, Cummins 14.0L Engine New P/N: TSO167050N Manf. # 13879880018 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 30Turbo Solutions Turbos CLAMPS FOR SILICONE HOSE Lined Hose Clamps • Stainless Steel Band, Saddle, & Housing • 5/16” Hex Screw • Recommended application up to 40 lbs-in torque • Seal silicone & other soft hoses without damage • Inner Liner Extends under the perforations to protect the hose & prevents extrusions through the worm gear perforations P/N Min. to Max. Size (Inches) IDL5352 051 2-13/16 - 3-3/4 IDL5360 051 3-5/16 - 4-1/4 CHARGE AIR COOLERS (CAC) • Charged Air Coolers incorporate a brazed aluminum construction that provides quality and performance that meets or exceeds OE specifications. • Charged Air Coolers are built with all new parts (no cores or rebuilt units). • Charged Air Coolers have a leak free design that enjoys excellent thermal and durability performance. WARRANTY Nationwide unlimited mileage on all products within their specified warranty period below • 2 Year on HD Charged Air Coolers • 1 Year on All Passenger Car and Light Truck Product www.showmetheparts.com/thermalsolutionsmfg-hdam/ SILICONE CHARGE AIR COOLER HOSE (CAC) • 4-Ply aramid reinforced with high strength restrictor rings • For superior connection between engine mounted charge air systems components • Ideal for handling slight misalignments & isolating vibration between hose ends P/N Length I.D. O.D. HV 44-250 6" 2.50 2.71 AUT561.15300 6" 3.00 3.21 AUT561.15350 6" 3.50 3.71 AUT561.1540060 6" 4.00 4.21 AUT561.1540075 7.5" 4.00 4.00 AUT561.1540080 8" 4.00 4.00 AUT561.15450 8" 4.50 4.50 HOT SIDE CAC HOSE P/N Description Length I.D. O.D. AUT561.62690 CAC Hose Cold Charge Air - Mack 6.375" 3.375" 3.375" AUT561.96337 CAC Hose Lower - Volvo 15.748" 3.150" 3.150" AUT561.75638 CAC Hose Cold Charge Air - Peterbilt 8.875" 2.500" 2.500" P/N Length I.D. O.D. AUT561.16300 6" 3.00 3.00 AUT561.16350 6" 3.50 3.50 AUT561.16400 6" 4.00 4.00 AUT561.16460 with 1/8” Rings 6.5" 4.00 4.00 COLD SIDE CAC HOSE FREIGHTLINER TS 0441361 FREIGHTLINER TS 0441237 FREIGHTLINER COLUMBIA TS 0441146 FREIGHTLINER CENTURY CLASS INTERNATIONAL / NAVISTAR TS 0441305 INTERNATIONAL FITS: 2009 INT’L 5500i, 5600i, 5900i, 2007-2009 8600 TRANS STAR, 2007-2009 EAGLE 9100i, 9200i, 9400i, 9900i, 2008-2009 PROSTAR TS 0441307 INTERNATIONAL NAVISTAR 7300-7700 PACCAR TS 0441103 KENWORTH T600 T800 W900 TS 0441105 KENWORTH T600 T800 W900 C500 TS 0441274 KENWORTH & PETERBILT 2008-2010 TS 0441314 KENWORTH T800 T880, PETERBILT 335, 365, 367 TS 0441114 PETERBILT 357 377 379 385 VOLVO/MACK TS 0441165 Volvo 1030114, 8027666 TS 0441285 (08‐13) CXU Vision / (09‐14), Titan / (07‐14) VN / (06‐10), VT, 20517561, 20585504 TS 0441282 VOLVO VN W/VOLVO ENGINE (FLANGED) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 30Turbo Solutions Turbos Desert ™ DR5 Related Fittings V STYLE BAND CLAMPS FOR TURBOS Non Crimpable Field Installable Fittings Turbo Charger Oil Feed Lines - Desert ™ DR5 Hose SAE 100R5 / Fleet Application 1 Wire, 1 Fabric Application: High temperature, medium pressure applications that include turbo Charger oil lines, tilt cab cylinder & air brake lines, transmission coolant, filtration lines and diesel fuel Inner Tube: CPE Reinforcement: One braid textile, one braid steel Cover: Blue impregnated textile braid Temperature Range: SAE 100R5 Hydraulic Applications: -40°F to 300°F (-40°C to 150°C) Air Brake Applications: -40°F to 200°F (-40°C to 93°C) General Hot Oil Applications: -40°F to 300°F (-40°C to 150°C) General Air Applications: -40°F to 200°F (-40°C to 93°C) Water Applications: -40°F to 212°F (-40°C to 100°C) P/N Hose Size Inch Max. Working Pressure Min. Bend Inch Min. Burst PSI GX DR5-06X250RL 5/16 2250 4.0 9000 GX DR5-08X250RL 13/32 2000 4.5 8000 JIC 37°, Male P/N Hose ID Inch Thread Size GX FG-JCM-0606 5/16 9/16-18 SAE 45°, Male P/N Hose ID Inch Thread Size GX FG-SFM-0606 5/16 5/8-18 GX FG-SFM-0808 13/32 3/4-16 NPTF, Male P/N Hose ID Inch Thread Size GX FG-NPM-0604 5/16 1/4-18 GX FG-NPM-0606 5/16 3/8-18 GX FG-NPM-0806 13/32 3/8-18 GX FG-NPM-0808 13/32 1/2-14 JIC 37° Female, Swivel P/N Hose ID Inch Thread Size GX FG-JCFX-0606 5/16 9/16-18 GX FG-JCFX-0808 13/32 3/4-16 JIC 37° Female 45° Elbow, Swivel P/N Hose ID Inch Thread Size GX FG-JCFX45-0606 5/16 9/16-18 GX FG-JCFX45-0808 13/32 3/4-16 JIC 37° Female, 90° Elbow, Swivel P/N Hose ID Inch Thread Size GX FG-JCFX90-0606 5/16 9/16-18 GX FG-JCFX90-0808 13/32 3/4-16 SAE 45°, Female, Swivel P/N Hose ID Inch Thread Size GX FG-SFFX-0606 5/16 5/8-18 GX FG-SFFX-0808 13/32 3/4-16 When replacing a Turbo, it’s recommended to replace the air filter and engine filter! WE HAVE A FULL LINE OF FILTERS AVAILABLE! P/N Class Diameter SX 35290 HC 4.0" SX 35804 HD 3.5" SX 35805 HD 4.0" SX 35806 HA 5.0" Turbocharger Speed Sensor AUT577.90512 2003-2009 CUMMINS OE # 4032068 Turbocharger Speed Sensor AUT577.96511 VOLVO D13 Engines, 10-14 9700, 11-15 VAH/VHD/VNL, 10-16 VNM OE # 21508269 Intake Air Temp/Boost Pressure Sensor PA1853724 Mack 2018-11, Volvo 2018-11 OE # 21097978 Exhaust Back Pressure Sensor AUT577.55620 International 90-16 DT570 Engines OE # 1850351C1 PA I SH I E LD WI TH S T RA I GHT R I BBON Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

11Clutch Guide New This clutch system offers the durability and performance necessary to withstand the high actuation conditions and associated with automated transmission systems. This clutch has been developed for a wide range of customer applications from Linehaul to Vocational to meet with the many specific automated transmissions offered by Eaton. CLUTCH & GEARING GUIDE MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 August 2021 (11Clutch Guide New) Clutch Parts & Accessories ∙ Flywheels ∙ Transmissions ∙ Differentials At the front of the UltraShift 6, 10 and 13-speed transmissions is the UltraShift DM clutch, which engages and disengages without an in-cab pedal. The AutoClutch uses a traditional two-plate configuration for heavy duty and single-plate for medium duty, complete with soft rate dampers and ceramic facings for smooth engagement. UltraShift ™ DM Clutch Eliminates the need for a clutch pedal and helps to maximize clutch life. UltraShift PLUS ECA (Electronic Controlled Actuator) MC MAX121000X 2”-10 Spine ∙ 1750ft/lb MC MAX122002X 2”-14 Spine ∙ 1850ft/lb AUTOMATED MANUAL TRANSMISSION CLUTCHES CATALOG NUMBER 11 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ *New flywheel required for every install *Eaton software required to remove and install unit P/N OE Reference Description Detroit D12 Transmission MC ANK4489CL K-4489 (Eaton) Single-Plate, 18 Involute Spline, Organic / 6-Spring / 1850 Torque Volvo I-Shift / Mack mDrive (13L Engine, Volvo I-Shift and Mack mDrive) MC MAX104461-1 104461-1 (Eaton) / 3400 700 359 (Sachs) Single-Plate, 24 Involute Spline, Organic / 6-Spring / 1850 Torque MC A-1001 - Clutch Actuator for MC MAX104461-1 430mm x 50mm Stamped Steel Clutch *New inertia brake may be required P/N GP K3637 *Eaton software required to remove and install unit Offered in these torque ranges: 1860 2050 2250 • OE supplied friction material USA made • Springs are OE quality USA made • Castings and stamping are USA made • All components are 100% new • New center plates Proudly Made in the USA • Self aligning release bearing • CNC machined housing • 6 coil spring with 3 assist spring technology • 2 year / 200,000 mile warranty for line haul applications or 1 year / 100,000 mile warranty for severe duty type applications New and Reman Available MC MAX3400300063X 1700 MAX TORQUE MC MAX3400300193X 1 860 MAX TORQUE MC MAX3400300195X 2050 MAX TORQUE MaxHD Sachs Reman Clutch Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 11Clutch Guide New 2 Clutch Guide MC MAX1076835(X) New/Reman MC MAX10723722(X) New/Reman MC MAX10734212(X) New/Reman MC MAX10805059B(X) New/Reman Manual Adjust MaxHD NEW Manual Adjust MaxHD REMAN Self Adjust SOLO MaxHD REMAN MaxHD Sachs REMAN CAT, CUMMINS, DETROIT 14” X 1-3/4” 10 SPLINE Single Plate, Flat Flywheel MC MAX1076835 MC MAX1076835X 2 Plate, Flat Flywheel MC MAX10723722 MC MAX10723722X 14” X 2” 10 SPLINE 2 Plate, Flat Flywheel MC MAX10734212 MC MAX10734212X 14” X 2” 10 SPLINE 2 Plate, Pot Type Flywheel MC MAX10805059B MC MAX10805059BX CAT, CUMMINS, DETROIT, VOLVO, INTERNATIONAL, MERCEDES 15-1/2” X 2” 10 SPLINE STANDARD DUTY 2 Plate, Flat Flywheel MC MAX10839182 MC MAX10839182X HEAVY DUTY 2 Plate, Flat Flywheel MC MAX10892582 MC MAX10892582X MC MAX10970182X MC MAX3400300063X MC MAX10892582H MC MAX10892582HX MC MAX10839174 MC MAX10839174X MC MAX3400300193X SUPER HEAVY DUTY MC MAX10839193H MC MAX10839193HX MC MAX10939193HX 2 Plate, Flat Flywheel MC MAX10892525 MC MAX10892525X 500+ HP MC MAX10970125X MC MAX3400300195X MC MAX10892525H MC MAX10892525HX MACK HIGH TORQUE MC MAX10893551X 2 Plate, Flat Flywheel MC MAX10893591 MC MAX10893591X MC MAX10993591X All MaxHD Clutches have 3 zerk fittings in housing equivalent to 208 and 209 Eaton Series Clutches 2 Year, Unlimited Mileage Warranty UltraShift ™ DM Clutch Eliminates the need for a clutch pedal and helps to maximize clutch life. UltraShift PLUS ECA (Electronic Controlled Actuator) MC MAX121000X 2”-10 Spine ∙ 1750ft/lb MC MAX122002X 2”-14 Spine ∙ 1850ft/lb AUTOMATED MANUAL TRANSMISSION CLUTCHES *New inertia brake may be required P/N GP K3637 *Eaton software required to remove and install unit *New flywheel required for every install *Eaton software required to remove and install unit Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 11Clutch Guide New 3 MC MAX10892525(X) New/Reman MC MAX10892525H(X) New/Reman MC MAX10839193H(X) New/Reman MC MAX10939193HX Reman MC MAX10892582(X) New/Reman MC MAX10970182X Reman MC MAX10892582H(X) New/Reman MC MAX10839182(X) New/Reman MC MAX10839174(X) New/Reman MC MAX10893591(X) New/Reman MC MAX10993591X Reman MC MAX10893551X Disc Springs Disc Facing Min. Flywheel Bore Opening Plate Load Max Torque (Ft./Lbs.) 8 4 Pad Ceramic Button 7” 2800 620 8 3 Pad Ceramic Button 7” 2400 860 8 3 Pad Ceramic Button 7” 2800 900 8 4 Pad Ceramic Button 7” 3600 1400 8 4 Pad Ceramic Button 7” 3600 1400 7 (Sachs 6) 4 Pad Ceramic Button 10” 4000 1700 7 6 Pad Ceramic Button 10” 4000 1860 10* (Sachs 6) 4 Pad Ceramic Button 8.5” 4000 1860 10* 6 Pad Ceramic Button 8.5” 4000 2050 7 6 Pad Ceramic Button 10” 4000 2250 7 (Sachs 6) 6 Pad Ceramic Button 10” 4000 2050 6 w/ Spline Saver 6 Pad Ceramic Button 10” 4000 2250 9 4 Pad Ceramic Button 10” 4000 1860 9 6 Pad Ceramic Button 10” 4000 2050 AUTOMATED MANUAL TRANSMISSION CLUTCHES MCI, Prevost, Van Hool and Serta Coaches SCS3400 000 358 Newell Coaches SCS3400 654 141 Bearing and Roller fork Kit SCS3189 600 001 ZF-AS TRONIC AND FREEDOMLINE TRANSMISSIONS *Use 7 Spring with FRO Transmission to avoid engine idle rattle Proudly Made in the USA Detroit D12 and Volvo I-Shift / Mack mDrive: See Front Page Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 11Clutch Guide New 4 PARTS & ACCESSORIES CLUTCH LUBE ASSEMBLIES MC GH8 8" Lube Tube Assembly MC GH12 12" Lube Tube Assembly Seal P/N O.D. I.D. Width Seal Temp. Rating Grease Temp. Rating Black Nitrile NCB203-FF.4 1.58" .67" .47" +248°F +347°F NCB205SS.4 2.05" .99" .59" +248°F +347°F NCB206FF 2.45" 1.18" .63" +248°F +347°F NCB206SS 2.45" 1.18" .63" +248°F +347°F NCB305DD 2.45" .99" .67" +248°F +347°F NCB305SS 2.45" .99" .67" +248°F +347°F NCB306SS 2.84" 1.18" .75" +248°F +347°F NCB306SSL (Mack) 2.84" 1.18" .75" +248°F +347°F Viton NCB306VV* 2.84" 1.18" .75" +419°F +400°F RT Series (K-2468) MC MIK1 MaxHD - Viton high temp pilot bearing, MC HB200 hinged clutch brake PA1EF66030 Nitrile pilot bearing, 127760 1 piece clutch brake FR Series (K-3600) MC MIK3 MaxHD - New design input shaft, Viton high temp pilot bearing, MC HB200 hinged clutch brake PA1900172 New design input shaft, Nitrile pilot bearing, 127760 1 piece clutch brake FR Series (K-3602) MC MIK8 MaxHD - Original design input shaft, Viton high temp pilot bearing, HB200 hinged clutch brake FR Hydraulic Release (K-4124) MW1K4124 New design input shaft, Viton high temp pilot bearing, 127760 1 piece clutch brake Rockwell Meritor RM, RMO, RMX, G MW1KIT 20088 Meritor input shaft, Viton high temp pilot bearing, 127760 1 piece clutch brake OIL SEAL KIT PA1EF69520 INPUT SHAFT ASSEMBLY PA1EF67490 10,13,15,18 Speed Hinged *Minimum Eaton Clutch Division: The operating temperature that the pilot bearing sees has increased in the last several years. This creates operating conditions that are no longer acceptable to the standard pilot bearings and grease. In addition, the life of the clutch has increased. The use of high temperature grease and Viton seals are now mandatory to ensure adequate bearing life. Pilot bearing failure usually results in a warranty claim for drag or clutch noise. This results in a claim against Eaton Clutch. CLUTCH BRAKES MC HB200 Hinged Clutch Brake 2" x .375" Thick - Tooth Style MC HB200-440 Hinged Clutch Brake 2" x .44" Thick - Tooth Style MC HB200-500 Hinged Clutch Brake 2" x .5" Thick - Tooth Style MC HB175 Hinged Clutch Brake 1" Tooth Style MD BK312 Hinged Clutch Brake 1.75" Button Style MD BK313 Hinged Clutch Brake 2" Button Style MC AHB200 Multi-Piece Hinged Clutch Brake 2" x .375" Thick Button Style 2-Piece MC M175 2 pc. Babcock Split Clutch Brake 1.75" MC M200 2 pc. Babcock Split Clutch Brake 2" MC 127200 2 pc. Split Brake 2" Roll Pin 1-Piece MC 127740X 1 pc. Torque Limiting Brake 1.75" MC 127760X 1 pc. Torque Limiting Clutch Brake 2" MC 125C-40 1.75” x .125” Thick MC 125C-41 2” x .125” Thick CLUTCH INSTALLATION KITS CLUTCH FORK MW1105C-137 HYDRAULIC CLUTCH RELEASE FORK AUT755.CF102H Ref. A7786 DRIVE LUGS MC 274C-6 Drive Pin CLUTCH ADJUSTER MC 125489 Kwik Adjuster CROSS SHAFTS MW1106C1185R 5.76" Short Shaft MW1106C1498R 6.50" Short Shaft BELL HOUSE BUSHING MW112815 CLUTCH BRAKE WASHERS PILOT BEARINGS Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 11Clutch Guide New We Resurface Flywheels in DM • DV • KC TOOLS OT 5044 Clutch Self-Adjusting Rotator Tool – 3/4” MC MAXCAT1 Clutch Adjustment Tool MC GT1 Bushing Grease Tool - Clutch CLUTCH ALIGNING SHAFTS MISCELLANEOUS TOOLS CLUTCH HANDLER - LOW CLEARANCE OT 5018A Flywheel Handling Attachment for Clutch Handler #5018 516160 CLUTCH ADJUSTING WRENCH OT 7028 CLUTCH ADJUSTMENT GAUGE SET OT 5035 TRANSMISSION OUTPUT SHAFT END YOKE REMOVER OT 7075 TRANSMISSION JACK OT 5019A NEW FLYWHEELS *Not recommended to turn the flywheel, always replace the flywheel as a best practice. Bold Part Numbers are Stocking Flywheels, non-stocking units available within 24-48 hours Flywheel Gauge P/N MC FG1 P/N OEM # Application Description Bore Dia. Pilot Mounting CAT MW1WA1265875 1265875 C7/3116/3126 Flat 134 tooth 13" OR 14" CLU 8BLT 1 DOWEL 17OD 134 7" 206 / 305 8 Bolt Holes & 1 Dowel MW1WA2569653 2569653 C15, C16, C18, 3406, 3406E Flat 113 tooth 15" CLUTCH FLAT 10" OPEN 20OD 113T 10.12" 306 12 Bolt Holes MW1WA4P8515 4P8515 C9/ C10 /C11/ C12 /C13 / 3176 Flat 113 tooth 15" CLU 10"OP 8BLT 1DOWL 20OD 113T 10" 306 8 Bolt Holes MW1WA9Y9311 9Y9311 3208 Flat 134 tooth 14" CLU 7.12"OP 10 OFST BLT 17" 134 7.12" 206 / 305 10 Offset Bolt Holes MW1WA901-10-4112 4P4797 3406/3406E/C15 Flat 113 tooth 10" OP 15" OD 113T 10" 306 12 Bolt Holes CUMMINS MW1WA3016495 3016495 NT855 Pot 103 Tooth 14" CLU CUP 6BLT 17"OD-103T 8.37" 306 6 Bolt Holes & 2 Threaded MW1WA3042787 3042787 L10 / M11 Pot 103 tooth 14" CLU CUP 8BLT 2 THRD 17"OD-103T 7.25" 306 6 Bolt Holes & 2 Threaded MW1WA902-110-4130 3071535 N14 / NT855 Flat 103 tooth 15" CLU FLAT 6BLT 2 THR 17"OD-103T 10.12" 306 6 Bolt Holes & 2 Threaded MW1WA3071615 3071615 L10 / M11 Flat 103 tooth 15" CLU FLAT 8BLT 2 THR 17"OD-103T 10.12" 306 8 Bolt Holes & 2 Threaded MW1WA3680922 3680922, 3680921 ISX, Signature 600 Flat 113 tooth 15" CLU FLT 10" 12BLT 20" OD 113T 10" 306 12 Bolt Holes MW1WA3906807 3906807 8.3L C-Series Flat 173 tooth 14" CLU FLT 8BLT 2 THR 17"173T .54" 7.25" 206 / 305 8 Bolt Holes & 2 Threaded MW1WA3921263 3921263 5.9L B Series Flat 173 tooth 14" CLU FLT 8BLT 17" OD -138T .610" 7.25" 306 8 Bolt Holes MW1WA3922645 3922645 8.3L C Series Flat 138 tooth 14" CLU FLT 8BLT 17" OD -138T .875" 7.25" 206 / 305 8 Bolt Holes DETROIT MW1WA23514177 23514177 Light Weight - 60 Series Flat 118 tooth 10" bore 15" CLUTCH 20"OD-118T Light Weight 10" 306 12 Bolt Holes MC 23509709 23509709 60 Series Flat 118 tooth 10" bore 15” CLUTCH 20”OD-118T Standard 10" 306 12 Bolt Holes FORD MW1WAE7HZ6375A E7HZ6375A 6.6L / 7.8L Diesel Flat 138 tooth 14" CLUTCH FLAT 8BLT 17" OD 138T 7.50" 206 / 305 8 Bolt Holes MACK/ VOLVO MW1WA530GB3145BM 530GB3145BM E7 Flat w/timing marks 118 tooth 15X9 10"& TIM MK 6B &1DP 20" 118T 10" 306 6 Bolt Holes & 1 Dowel MW1WA530GB3170M 530GB3170M E7 E-Tech Flat 117 tooth 2 notched 15X9 10"& TIM MK 6B &1DP 20" 117T 10" 306 6 Bolt Holes & 1 Dowel MW1WA20730056 20730056 VED12 Flat 153 tooth 15" CLU 14BLT & 1 DP 19.5" OD 153T 10" 306 14 Bolt Holes & 1 Dowel MW1WA905-10-4168 21184666 ISHIFT VOLVO D13/ MDRIVE MACK MP8 Automatic Transmission 10” Bore 153 Tooth 10" - 14 Crank Mounting Bolts, 12 Clutch mounting bolts NAVISTAR MW1WA1809144C91 1809144C91 6.9L / 7.3L Flat 137 tooth 13" OR 14" CLUTCH 9BLT 17" OD -137T 7.25" 205 9 Bolt Holes MW1WA1810855C93* 1810855C93 DT466 A-B-C- Flat 138 tooth (1975-1996) 14" CLUTCH 8BLT 17"OD -138T 7.25" 205 8 Bolt Holes MW1WA1818214C91 1818214C91 7.3L / 444E Flat 137 tooth 13" OR 14" CLU 10BLT 17" OD 137T 7.25" 206 / 305 10 Bolt Holes MW1WA1821915C91* 1821915C91 DT466E Flat 138 tooth 14" CLUTCH 12BLT 17"OD 138T 7.25" 0 12 Bolt Holes MC AT175X1 1 3/4” OD, 1” Pilot MC AT-200-10 2” OD, 1 1/4” Pilot, 10 Splines, 7.3” Long MC AT-200-14 14 Spline MC AT-200-18 18 Spline MC AT-200-24 24 Spline MC AT175 1 3/4” OD, 1 1/4” Pilot, Spline 7.375” Long Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 11Clutch Guide New 6 Eaton Differentials Tandem Front Ref. # Single or Tandem Rear Ref. # GENDSP40-336 GENDS404-336 GENRSP40-336 GENRS404-336 GENDSP40-355 GENDS404-355 GENRSP40-355 GENRS404-355 GENDSP40-370 GENDS404-370 GENRSP40-370 GENRS404-370 GENDSP40-390 GENDS404-390 GENRSP40-390 GENRS404-390 Bold Part Numbers are Stocking Units I-Shift Transmissions Part # Description Max Torque Gears Generation Application GENAT2512C Automatic Transmission 2500 12 III AND IV Standard GENATO2512C Automatic Transmission w/ Overdrive 2500 12 III AND IV Standard GENAT2612D Automatic Transmission 2600 12 V AND EEV Standard GENATO2612D Automatic Transmission w/ Overdrive 2600 12 V AND EEV Standard GENAT2612D-HD Automatic Transmission 2600 12 V AND EEV Heavy Duty GENATO2612D-HD Automatic Transmission w/ Overdrive 2600 12 V AND EEV Heavy Duty GENATO3112C Automatic Transmission w/ Overdrive 3100 12 III AND IV Standard GENATO3112D Automatic Transmission w/ Overdrive 3100 12 V AND EEV Standard GENATO3112D-HD Automatic Transmission w/ Overdrive 3100 12 V AND EEV Heavy Duty Rockwell Differentials Tandem Front Single or Tandem Rear GENRD20145-342 GENRR20145-342 GENRD20145-358 GENRR20145-358 GENRD20145-373 GENRR20145-373 GENRD20145-390 GENRR20145-390 Eaton-Fuller Transmissions Part # Description GENFRO16210CP 10 Speed GENRTLO16713AP 13 Speed GENRTLO18913AH 13 Speed GENRTLO18718BP 18 Speed GENRTLO18918BH 18 Speed GENRTO16908LLP 8 Speed Plus 2 Deep Reduction Speeds If part number ends with: H - Halo Installed (plug kits included) P - Pump Installed - ready for external cooler HD4560 Allison Transmission HD3500 Allison Transmission Factory Authorized Remanufacturer 36 Month/Unlimited Miles Warranty Bold Part Numbers are Stocking Units Phone 773-247-6900 | Fax 773-247-2632 ur remanufactured rkmanship for the plication. e, at General Truck nt. Any component e original warranty administered only You must contact 1 for authorization gible for warranty urred as a result of oper application or mponents that may s, etc… arts, Inc. and shall e conditions stated y failed component replacement. Any s, Inc. and may be ned to be a non- REMAN UNITS IONS ipment is ssions and rebuilt and none. We test our state-of- ion mechanics ndustry. ALS ipment is the differential expert for ustrial, agricultural, construction, mining ks and equipment. General Truck Parts and and medium duty differentials and parts. ual Transmissions rentials 4040 W. 40th Street | Chicago, IL 60632 | www.GeneralTruckParts.com | Toll Free 800-621-3914 | Phone 773-247-6900 | Fax 773-247-2632 This warranty covers parts and labor to repair or replace, at General Truck Parts, Inc.’s option, the failed remanufactured component. Any component repaired or replaced will retain the remainder of the original warranty period. General Truck Parts, Inc. nationwide warranty may be administered only by one of our approved warranty repair facilities. You must contact General Truck Parts, Inc. at 1-800-621-3914 Ext. 2581 for authorization prior to any repairs being made in order to be eligible for warranty coverage. This warranty shall not extend to failures or damage incurred as a result of improper installation, improper lubrication, abuse, improper application or improperly installed accessories or other attached components that may be worn or failed, i.e. drive shafts, yokes, power takeoffs, etc… All warranty claims shall be made to General Truck Parts, Inc. and shall be supported by satisfactory evidence in respect of the conditions stated herein. General Truck Parts, Inc. reserves the right to have any failed component returned to our facility for inspection prior to repair or replacement. Any freight incurred will be prepaid by General Truck Parts, Inc. and may be billed back to your account if the failure is determined to be a non- warrantable failure. a supplier of manual transmissions and transfer case products, both rebuilt and new. Our quality is second to none. We test all rebuilt transmissions on our state-of- the-art dynonometer. Our union mechanics are some of the best in the industry. DIFFERENTIALS General Truck Parts and Equipment is the differential expert for on-highway, off-highway, industrial, agricultural, construction, mining and logging heavy duty trucks and equipment. General Truck Parts and Equipment also carries light and medium duty differentials and parts. 2 Year Warranty — Manual Transmissions 1 Year Warranty — Differentials OE QUALITY TRANSMISSIONS & DIFFERENTIALS WARRANTY Manual & Automated Manual Transmissions: 36 Months/Unlimited Miles Differentials: 36 Months/Unlimited Miles Transfer Cases: 6 Months/Unlimited Miles Off highway/Hydraulic Components: 6 Months/ Unlimited Miles SAME DAY OR NEXT DAY SHIPPING With an extensive inventory on-hand and ready to ship, most orders will be shipped the day of order if the order is received before 12 Noon (CST). Orders received after 12 Noon (CST) will be processed and shipped the following business day. (Note: This applies to common products. Specialty items may have longer lead times). Midwest Wheel is your Heavy Duty Drivetrain Supplier Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 11Clutch Guide New 7 GEAR OIL FOR TRAILER HUBS SH 550032647 5 Gallon SH 550045337 1 Gallon SH 550032968 55 Gallon Special Order Shell Spirax ® S6 ATF A295 For Allison Automatic Transmissions. Premium Synthetic Technology Multi-Vehicle Automatic Transmission Fluid. Spirax ® S6 GME 40 Eaton approved synthetic transmission fluid for manual Fuller Transmissions. Shell Spirax ® S6 AXRME 75W-90 Synthetic, long life axle and manual transmission oil. Recommended for use in all rear axles. SH 550026915 5 Gallon SH 550026914 16 Gallon SH 550026918 55 Gallon Special Order SH 550044797 5 Gallon SH 550044799 16 Gallon SH 550044796 55 Gallon Special Order LUCLUC10043 qt 85/140 plus LUCLUC10066 5 gallon 80/90 LUCLUC10072 5 gallon 75W/90 Synthetic LUBRICANTS Input Yoke Yoke P/N Strap Kit Input Nut Input Seal 1710 Full Round SD16-4-9031X - MW1127589 MW1127591 1710 Half Round SD16-4-9031-1X SD16.5-718X SPL170 Half Round SD1170-4-261-1X SD1170-70-18X SPL90 Half Round SD190-4-251-1X SD190-70-28X Breather Kit: H6 507162 GENRSP40-XXX, RD404-XXX Eaton Rear Rear End Breather Kit: H6 507162 Input Yoke Yoke P/N Strap Kit Input Nut Input Seal 1710 Half Round SD16-4-6391-1X SD16.5-70-18X MW140X1237 RI A11205Z2730 GENRR20145-XXX Meritor Rear Rear End Breather Kit: H6 507162 Input Yoke Yoke P/N Strap Kit Input Nut Input Seal 1810 Half Round SD16.5-4-3381-1X SD16.5-70-18X MW140X1233 RI A11205X2728 1810 Full Round SD16.5-4-3381X - 1760 Half Round SD16.3-4-331-1X SD16.5-70-18X Output Yoke Yoke P/N Output Nut Output Seal 1710 Half Round SD16-4-6371-1 MW140X1237 R1 A11205Y2729 SPL170 Half Round SD1170-4-741-1X GENRD20145-XXX Meritor Front Rear End Output Yoke Yoke P/N Output Nut Output Seal 1710 Half Round SD16-4-9231-1X - H6 K2918 1760 Half Round SD16.3-4-161-1X 1760 Full Round SD16.3-4-1681 1810 Half Round SD16.5-4-4631-1X 1810 Full Round SD16.5-4-4631 SPL250 Half Round SD1250-4-271-1X Eaton/Fuller Transmissions All w/10 Spline Shaft Input Yoke Yoke P/N Strap Kit Input Nut Input Seal 1810 Full Round SD16.5-4-4571X - MW1128049 MW1127591 1810 Half Round SD16.5-4-4571-1X SD16.5-70-18X 1760 Full Round SD16.3-4-5221X - 1760 Half Round SD16.3-4-5221-1X SD16.5-70-18X SPL170 Half Round SD1170-4-201-1X SD1170-70-18X SPL250 Half Round SD1250-4-81-1X SD1250-70-18X Output Yoke Yoke P/N Output Nut Output Seal 1710 Full Round SD16-4-9041X MW1127588 MW1127592 1710 Half Round SD16-4-9041-1X SPL170 Half Round SD1170-4-221-1X GENDSP40-XXX, DD404-XXX Eaton Front Rear End Breather Kit: H6 507162 SENTINEL ESP FILTERED VENT ST 359-6137 Drive Axle Vent (3/8” adapter) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

06Ideal Hose Clamps130004202021 CLAMPS & HOSE PRODUCTS • Eliminates over-inhibited cooling systems • Reduces cost • Minimizes waste NEED RELEASE ® Extended Service Coolant Filter P/N Min Dia. Max Dia. IDL62040 51 7/32” 5/8” IDL62060 51 1/4 25/32 IDL5706 051 7/16 25/32 IDL5708 051 1/2 29/32 IDL5710 051 9/16 1-1/16 IDL5712 051 11/16 1-1/4 IDL5716 051 13/16 1-1/2 IDL5720 051 13/16 1-3/4 IDL5724 051 1-1/16 2 IDL5728 051 1-5/16 2-1/4 P/N Min Dia. Max Dia. IDL6506E 51 9/16” 13/16” IDL6508E 51 11/16 15/16 IDL6510E 51 13/16 1-1/16 IDL6512E 51 15/16 1-1/4 IDL6516E 51 13/16 1-1/2 IDL6520E 51 13/16 1-3/4 IDL6524E 51 1-1/16 2 IDL6528E 51 1-5/16 2-1/4 IDL6532E 51 1-9/16 2-1/2 IDL6536E 51 1-13/16 2-3//4 IDL6540E 51 2-1/16 3 P/N Min Dia. Max Dia. IDL47010 51 13/16” 1-1/16” IDL47012 51 15/16 1-1/4 IDL47016 51 13/16 1-1/2 IDL47020 51 13/16 1-3/4 IDL47024 51 1-1/16 2 IDL45200 51 1-1/4 2-1/8 IDL45250 51 1-3/4 2-5/8 IDL45300 51 2-1/4 3-1/8 IDL45350 51 2-3/4 3-5/8 General Purpose Lined Clamps Constant Torque P/N Min Dia. Max Dia. IDL5732 051 1-9/16 2-1/2 IDL5736 051 1-13/16 2-3/4 IDL5740 051 2-1/16 3 IDL5744 051 2-5/16 3-1/4 IDL5748 051 2-9/16 3-1/2 IDL5752 051 2-13/16 3-3/4 IDL5756 051 3-1/16 4 IDL5764 051 3-9/16 4-1/2 IDL5772 051 1-7/8 5 IDL5796 051 3-5/8 6-1/2 UNIVERSAL 3-WAY TEST STRIPS P/N NA TS200 • Designed for all heavy duty coolant types, including extended life coolant • Effectively tests freeze point, contamination & chemical protection and SCA (nitrate) concentrations CATALOG NUMBER 06 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ INSULONE ® HEATER HOSE Designed for heater hose applications with resistance to high underhood temperatures. Temperature Range: -40°F to 257°F (-40°C to 125°C) P/N ID (in.) DY 80314 5/8 DY 80316 3/4 DY 80319 1 Silicone heater hose is used for coolant transfer applications and higher temperature service. Temperature Range: -65°F to 350°F SAE Specifications: 20R3, Class A P/N ID (in.) DY 80251GL 5/8 DY 80252GL 3/4 DY 80254GL 1 GOLD LABEL ® SILICONE HEATER HOSE 50 FT. ROLLS HEATER HOSE (sold by the foot) STANDARD HEATER HOSE Designed for heater hose applications where resistance to antifreeze coolants and underhood temperatures is required. Temperature Range: -40°F to 257°F (-40°C to 125°C) SAE Specifications: Similar to SAE 20R3 P/N ID (in.) DY 80259 3/8 DY 80270 1/2 DY 80271 5/8 DY 80273 3/4 BLUE HEATER HOSE WITH XTREME HEAT TECHNOLOGY Designed for heater hose applications that are exposed to higher underhood temperatures and require a higher heat resistance. Temperature Range: -40°F to 300°F (-40°C to 149°C) SAE Specifications: SAE 20R3 Class D3 HT EC Branding: Continental Blue Xtreme ID, SAE J20R3-HT-D3-EC, Made in U.S.A. P/N ID (in.) GY 65028 3/8 GY 65029 1/2 GY 65031 5/8 GY 65033 3/4 GY 65035 1 GY 65037 1-1/4 HOSE BARB FITTINGS BELTS Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

33Max HD Transmission and Differentials_v3 CATALOG NUMBER 33 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ HD4560 Allison Transmission HD3500 Allison Transmission Factory Authorized Remanufacturer 36 Month/Unlimited Miles Warranty Eaton Differentials Tandem Front Ref. # Single or Tandem Rear Ref. # GENDSP40-336 GENDS404-336 GENRSP40-336 GENRS404-336 GENDSP40-355 GENDS404-355 GENRSP40-355 GENRS404-355 GENDSP40-370 GENDS404-370 GENRSP40-370 GENRS404-370 GENDSP40-390 GENDS404-390 GENRSP40-390 GENRS404-390 Bold Part Numbers are Stocking Units Rockwell Differentials Tandem Front Single or Tandem Rear GENRD20145-342 GENRR20145-342 GENRD20145-358 GENRR20145-358 GENRD20145-373 GENRR20145-373 GENRD20145-390 GENRR20145-390 Eaton-Fuller Transmissions Part # Description GENFRO16210CP 10 Speed GENRTLO16713AP 13 Speed GENRTLO18913AH 13 Speed GENRTLO18718BP 18 Speed GENRTLO18918BH 18 Speed GENRTO16908LLP 8 Speed Plus 2 Deep Reduction Speeds If part number ends with: H - Halo Installed (plug kits included) P - Pump Installed - ready for external cooler Bold Part Numbers are Stocking Units -621-3914 | Phone 773-247-6900 | Fax 773-247-2632 RAGE all of our remanufactured oor workmanship for the e and application. or replace, at General Truck omponent. Any component er of the original warranty may be administered only cilities. You must contact Ext. 2581 for authorization o be eligible for warranty mage incurred as a result of se, improper application or ched components that may r takeoffs, etc… Truck Parts, Inc. and shall ect of the conditions stated have any failed component repair or replacement. Any uck Parts, Inc. and may be determined to be a non- REMAN UNITS SSIONS nd Equipment is ransmissions and s, both rebuilt and cond to none. We test ns on our state-of- Our union mechanics n the industry. TIALS nd Equipment is the differential expert for way, industrial, agricultural, construction, mining ty trucks and equipm ent. General Truck Parts an d es light and medium duty differentials and parts . Manual Transmi ssions Differentials 4040 W. 40th Street | Chicago, IL 60632 | www.GeneralTruckParts.com | Toll Free 800-621-3914 | Phone 773-247-6900 | Fax 773-247-2632 WARRANTY COVERAGE General Truck Parts, Inc. agrees to warranty all of our remanufactured products from defects in components or poor workmanship for the specified time period for that specific model type and application. This warranty covers parts and labor to repair or replace, at General Truck Parts, Inc.’s option, the failed remanufactured component. Any component repaired or replaced will retain the remainder of the original warranty period. General Truck Parts, Inc. nationwide warranty may be administered only by one of our approved warranty repair facilities. You must contact General Truck Parts, Inc. at 1-800-621-3914 Ext. 2581 for authorization prior to any repairs being made in order to be eligible for warranty coverage. This warranty shall not extend to failures or damage incurred as a result of improper installation, improper lubrication, abuse, improper application or improperly installed accessories or other attached components that may be worn or failed, i.e. drive shafts, yokes, power takeoffs, etc… All warranty claims shall be made to General Truck Parts, Inc. and shall be supported by satisfactory evidence in respect of the conditions stated herein. General Truck Parts, Inc. reserves the right to have any failed component returned to our facility for inspection prior to repair or replacement. Any freight incurred will be prepaid by General Truck Parts, Inc. and may be billed back to your account if the failure is determined to be a non- warrantable failure. REMAN U TRANSMISSIONS General Truck Parts and Equipment is a supplier of manual transmissions and transfer case products, both rebuilt and new. Our quality is second to none. We test all rebuilt transmissions on our state-of- the-art dynonometer. Our union mechanics are some of the best in the industry. DIFFERENTIALS General Truck Parts and Equipment is the differential expert for on-highway, off-highway, industrial, agricultural, construction, mining and logging heavy duty trucks and equipment. General Truck Parts and Equipment also carries light and medium duty differentials and parts. 2 Year Warranty — Manual Transmissions 1 Year Warranty — Differentials OE QUALITY TRANSMISSIONS & DIFFERENTIALS WARRANTY Manual & Automated Manual Transmissions: 36 Months/Unlimited Miles Differentials: 36 Months/Unlimited Miles Transfer Cases: 6 Months/Unlimited Miles Off highway/Hydraulic Components: 6 Months/ Unlimited Miles SAME DAY OR NEXT DAY SHIPPING With an extensive inventory on-hand and ready to ship, most orders will be shipped the day of order if the order is received before 12 Noon (CST). Orders received after 12 Noon (CST) will be processed and shipped the following business day. (Note: This applies to common products. Specialty items may have longer lead times). Midwest Wheel is your Heavy Duty Drivetrain Supplier 3 YEAR WARRANTY on Transmissions & Differentials Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

15Radios All012209142021 CATALOG NUMBER 15 www.midwestwheel.com Order NLINE ™ www.midwestwheel.com Order NLINE ™ • 40 CB Channels with Channel Scan • 10 NOAA Weather Channels • Instant Channels 9 & 19 • SoundTracker ™ Noise Reduction System • Simultaneously Monitor 2 Channels with Dual Watch • 29 LX Full Featured 4-color LCD CB Radio • 4 Color Programmable LCD Display • Instant Channel 9/19 • Talk-back • Frequency Display • All Channel Scan • 10 Channel NOAA Weather with All Hazards Alert • Comes in special 4-color Gift Box 18WXSTII COMPACT CB/WEATHERBAND RADIO WX INDICATOR P/N D8 COB 18WXST2 29LX CB RADIO P/N PAN29LX Your Link to Over 30 Million CBs in Use Today! 19DX IV COMPACT CB RADIO WITH DYNAMIC MIC P/N D8 COB 19DX4 • 40 CB Channels • 4 Watts RF Power • Digital Signal Strength Meter • PA System 29LTD CLASSIC CB RADIO P/N D8 COB 29LTD • 40 CB Channels • Full RF Power Output • 9’ Microphone Cord • SWR Calibration • Front Panel Microphone Connector $53.59 $115.49 25LTD FULL POWER CLASSIC CB RADIO P/N D8 COB25LTD • 40 CB Channels • Full RF Power Output • 9’ Microphone Cord • Front Panel Microphone Connector $102.49 29 LX MAX PROFESSIONAL SMART CB RADIO W/ 4-COLOR DISPLAY P/N D8 29LXMAX • Cobra iRadar ® App Integration • Legal Hands-Free Phone Calls and Text Messaging • Rewind-Say-Again ® Missed Transmission Re- play and Memo Recording • 10 Channel NOAA ® Weather Receiver and Alert • NightWatch ® Illumination and 4-Color LCD Display $241.29 $81.89 $132.29 CBs • Radios • Accessories • Bluetooth ® Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 15Radios All012209142021 ANTENNAS • Mount horizontal mirror arm or rail, vertical mirror arm or rail or flat vertical side • 3-Way Stainless Steel Mount • 18 Ft. coaxial cable MAGNETIC ANTENNA MOUNT TWIST-ON PL-259 COAX CABLE CONNECTORS RG-58A/U, RG-59A/U & RG-8X HTST6-259 $1.69 • An easy to install PL-259 connector • No crimping tools needed ANTENNA ACCESSORIES CHROME PLATED STEEL SPRINGS HTSR-3H $7.29 Heavy Duty, 3/8”-24 threads For antennas up to 5' HTSR-8A $13.99 9’ Coax Cable HTSK-8A $16.99 18’ Coax Cable HTSR-9A $25.49 9’ Co-Phase Cable HTSK-9A $31.49 18’ Co-Phase Cable PL/PL/PL COAX CABLE HTSK-4A $5.49 Heavy Duty H.D. Aluminum Bracket • Supports antennas up to 5’ length • Single or dual antenna installations • K-4A antenna stud mount included • 2.5” T x 2” W Stainless Steel 3-Way Bracket • For horizontal or vertical mounting • For antennas up to 5’ Aluminum Bracket • For single or dual antenna mounting • For antennas up to 5’ HTSSS-64A $15.99 PANPS322 $7.29 • Mount horizontal mirror arm or rail, vertical mirror arm or rail or flat vertical side • 3-Way Stainless Steel Mount • 18 Ft. coaxial cable MICROPHONE DYNAMIC CB SPEAKER HTSK-11 $31.99 • The strongest magnet mount! • 4.9” base • 18’ FireFlex coaxial cable included • For use with Firestik & Firestik II antennas up to 3’ long MOUNT KITS ANTENNA MOUNTING ACCESSORIES MIRROR MOUNTING BRACKETS LOWER PRICES! SINGLE MIRROR MOUNT KITS DUAL MIRROR MOUNT KITS • Heavy duty CB antenna • Hi-performance loading coil maximizes the transmit/receive functions of your CB HEAVY DUTY STUD MOUNTS • Screw-on style • For 1/2” hole • Heavy duty, hi- performance CB antenna • Quick & easy to tune ORIGINAL FIRESTIK ® TUNABLE TIP FIRESTIK ® II Premium Dynamic 4-pin Replacement CB Microphone Black Price 2' Antenna HTSFS2B $15.99 3' Antenna HTSFS3B $16.99 4' Antenna HTSFS4B $17.99 White Black Price 2' Antenna HTSKW2W HTSKW2B $12.99 3' Antenna HTSKW3W HTSKW3B $13.99 4' Antenna HTSKW4W HTSKW4B $15.99 White Black Price 3' Kit HTSKW3-DMK-W HTSKW3-DMK-B $86.99 4' Kit HTSKW4-DMK-W HTSKW4-DMK-B $89.99 White Black Price 3' Kit HTSKW3-SMK-W HTSKW3-SMK-B $39.99 4' Kit HTSKW4-SMK-W HTSKW4-SMK-B $42.99 D8 HGM73 • 9 Foot Cord • Wire mesh grille • Heavy-duty ABS shell • 4-pin connector Premium 4-pin Power Microphone D8 HGM75 • 2 Transistor Amplifier • 9 Foot Cord • Wire mesh grille • Heavy-duty ABS shell • 4-pin connector $20.99 $16.99 PANJBC995H $7.79 • Designed to offer an unheard of combination of unsurpassed power handling, great sound, rugged construction and stunning looks • 15 watt power • 4" speaker with 5.5 oz magnet • Shock-resistant construction • 180º ratcheted swivel mounted bracket • Earpiece jack for team drivers • 2 year warranty HighGear ™ by Cobra External Speaker D8 HG S100 $18.95 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 15Radios All012209142021 D8 CPI1500W 1500 Watts Continuous Power 3000 Watts Peak Power D8 CPI2500W 2500 Watts Continuous Power 5000 Watts Peak Power What’s Included: • Cobra CPI1500W Power Inverter • 48-inch #4 AWG Power Cables • Terminal Protector Boots • Quick Start Guide What’s Included • Cobra CPI2500W Power Inverter • (4) 48-inch #4 AWG Power Cables • Terminal Protector Boots • Quick Start Guide • Rand routing – With advanced lane guidance and split-screen junction view • Truck POIs – Travel centers, truck service locations • Weather – Ten different map overlays to view conditions along your route • Lifetime Traffic Everywhere – Covers major truck routes, plus local roads in urban areas • Dash cam on board – Just hit record • Preloaded trucking apps – Fuel manager, accounting, load board, document imaging • Fuel logs – Calculate current and average fuel economy • Live fuel prices – Sort by price, distance, or brand • Toll costs – View estimated toll costs and compare routes without tolls • Mileage – Record mileage and view by date or by state/province • Off the clock, when it’s time for a break, just take the TND Tablet 80 from the magnetic mount and kick back - check e-mail, browse the web, read the news, stream movies, download games BLUE TIGER ADVANTAGE PLUS HEADSET TND ™ TABLET 80 Advanced truck GPS + 8" Android tablet P/N PANTND-TABLET The 8” truck tablet features award-winning truck-specific navigation, on-board dash camera, pre-loaded trucking apps, and more. POWER INVERTER WITH FAST CHARGE USB PAN17-150401-1 Blue Tiger’s most rugged headset. Built to military standards for ruggedness and durability. • Color: Black • Noise Cancellation: 97% • Talk Time: 36 hrs. • Standby Time: 1,000+ hrs. • Weight: 3.2 oz. • Fit: On-Ear • Multi-Media Support: Yes • Smart Assistant Enabled: Yes • Range: Up to 100 ft. • Bluetooth: 5.0 • Convertible: No • Military Grade: Yes • Warranty: 1 Year CELL PHONE / TABLET MOUNTS MobNetic Pro 90 MOBMOBN-PRO-BLK Mobnetic plate attaches onto your phone to magnetically hold your phone onto the mount using a 90-lb pull force rare earth magnet TABNETIC PRO MOBTABN-PRO 290-lb pull-force magnets Rotates 360° and tilts a full 90° for ultimate articulation and custom display angles UNIQUE DOUBLE MAGNET MOUNT $120.99 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==