38Monroe PreFitted Tie Strap CATALOG NUMBER 38 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ com Before Installation requires that the unit be installed per directions on label. The label indicating “THIS SIDE UP” reflects the proper position. Make sure to look for the bulged area in the base cup at the reserve tube mounting loop as it should always face downward. After CHALLENGE SOLUTION Steering Stabilizer Installation on Self-Steering Drop Axles Spring-Over Stabilizer Design Must Be Compressed Prior to Installation The horizontally mounted stabilizers used on cement truck drop axles and a variety of other severe-duty applications are commonly exposed to heavy loads, extreme vibration, and road shock. Many stabilizers feature a more robust, spring-over configuration that requires the units to be compressed prior to installation. Unfortunately, the strength of the integrated coil spring makes it difficult to compress the stabilizer. Pre-Fitted Tie Strap on Latest Monroe ® Magnum ™ Spring-Over Steering Stabilizer To ensure fast, easy installation in the service bay, the latest Monroe Magnum spring-over steering stabilizer ( #MO 66506) for popular applications like Hendrickson Truck Suspension, Challenge Cook, and Granning Suspension, is retained at its compressed, installation-ready length through a factory installed tie strap. To install the new Magnum stabilizer, simply secure the unit re-using the OE bolts and then cut the tie strap to release the spring and rod. In addition to the ease of installation provided by this feature, Monroe Magnum Spring-Over Steering Stabilizers are built to meet or exceed OE-style performance. Other features include: • Nitrogen gas-charged to prevent aeration and reduce shock fade • Nitrocarburized piston rod • 1-3/8” (35mm) Bore • Larger oil chamber • Thicker tube wall • Plastic dirt shield Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Monroe PreFitted Tie Strap MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 COMMITMENT TO QUALITY Replacing worn shocks with Monroe ® Magnum ™ shock absorbers can help reduce excessive vibration, resulting in longer tire life, less downtime and a lower cost per mile NITROCARBURIZED ROD .70” (18mm) Nitrocarburized rod Competitor .65” (17.3mm) Chrome rod • Larger diameter rod provides better compression control and side-load strength • Nitrocarburized design more environmentally friendly, maintaining chrome structural benefits, without effecting durability or use life of the rod BORE SIZE 1.75” (44.6mm) Bore Competitor 1.62” (41.1mm) Bore • Larger bore size gives accessibility to finer tune the valving by allowing more hydraulic fluid to dissipate heat for better vehicle control PTFE COATED BEARING PTFE Coated Bearing Competitor no bearing • Red uces friction during operation between the rod and rod guide, improving durability PRESSURE TUBE THICKNESS .05” Pressure tube withstanding pressure of 9KPSI Competitor .025” Pressure tube withstanding pressure of 3.2-4KPSI • Thicker pressure tube provides the ability to handle more severe road conditions • Thinner pressure tube thickness can cause bursting at the end caps and splitting at the tube seams under more extreme pressures ROBUST HYDRAULIC LOCK-OUT Robust hydraulic lock-out design Competitor Cross-drilled hole lock-out design • Cross-drilled lock-out design can compromise the strength and support of the rod • Hydraulic lock-out design prevents over- extension of the suspension, top-out of the piston and averts damage to the seal assembly LOOP WELDING TECHNIQUE Resistance weld with additional 360-degree weld where applicable Competitor 360-Degree arc weld • 100% Resistance weld meets OE tensile strength and durability requirements PISTON DESIGN Sintered iron piston Competitor Aluminum die-cast piston • Sintered iron design allows for more precise piston dimensions, requiring no additional components, for improved durability and an exceptional fit • Aluminum die-cast design requires a rubber O-ring to prevent oil from bypassing the valve BUSHING DESIGN Tenneco shouldered bushing Competitor Standard bushing • Shouldered bushing and bonded bushing with sleeve designs prevent bushing walkout for improved quality and durability USE THE REFERENCE CHART ABOVE TO COMPARE MAGNUM ™ PRODUCTS WITH THE COMPETITION - DISCOV R COMMITMENT TO QUALITY MONROE® MAGNUM ™ SHOCK ABSORBERS ARE BUILT FOR DURABILITY, VEHICLE STABILITY AND DRIVER COMFORT reduce excessive vibration, resulting and a lower cost per mile CTION ISON ROE® TAGE ITOR ISON ALITY TANT Nitrocarburized Rod 1 Piston Design 4 Bore Size Pressure Tu Thickness 6 5 PTFE Coated Bearing 2 Robust Hydraulic Lock-Out 3 .70" (18mm) Nitrocarburized rod .65" (17.3mm) Chrome rod Larger diameter rod provides better compression control and side-load strength Nitrocarburized design more environmentally friendly, maintaining chrome structural benefits, without effecting durability or use life of the rod • • PTFE Coated bearing No bearing Reduces friction during operation between the rod and rod guide, improving durability • Robust hydraulic lock-out design Cross-drilled hole lock-out design Cross-drilled lock-out design can compromise the strength and support of the rod Hydraulic lock-out design prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly • • Sintered iron piston Aluminum die-cast piston Sintered iron design allows for more precise piston dimensions, requiring no additional components, for improved durability and an exceptional fit Aluminum die-cast design requires a rubber O-ring to prevent oil from bypassing the valve • • 1 .75" (44.6mm) Bore 1 .62" (41.1mm) Bore Larger bore size gives accessibility to finer tune the valving by allowing more hydraulic fluid to dissipate heat for better vehicle control • .05" Pressure tube withstanding pressu of 9KPSI .025" Pressure tube withstanding pressu of 3.2-4KPSI Thicker pressure tub provides the ability handle more severe conditions Thinner pressure tub thickness can cause bursting at the end c and splitting at the t seams under more e pressures • • Monroe® Competitor Monroe® Competitor Monroe® Compe Monroe® Competitor Monroe® Competitor Monroe® Competitor 1 2 3 4 5 6 Comparison based on analysis of sample product manufactured by competitor for the same application. FEATURING A NITROGEN GAS CHARG AERATION, IMPROVING VEHICLE CO CHART ABOV TO OMP E MAGNUM ™ PRODUCTS WITH THE COMPETITION - DISCOVER THE M ROE® AD TMENT TO QUALI Y OE® MAGNUM ™ SH CK ABSORBERS ARE BUILT Y, VEHICLE STABIL TY AND DRIV R COMFORT reduce excessive vibration, r sulting in longer tire life, less and a lower cost per mile Piston Design 4 Bore Size Pressure Tube Thickness 6 Loop Welding Technique 7 5 PTFE Coated Bearing 2 Robust Hydraulic Lock-Out 3 d s, ty PTFE Coated bearing No bearing Reduces friction during operation between h rod and rod guide, improving durability • Robust hydraul c lock-out design Cross-drilled hole lock-out design Cross-drilled lock-out design can compromise the strength and s pport of the rod Hydraulic lock-out esign prevents over-extension of the suspension, top-out of the piston and av rts damage to the seal assembly • • Sintered iron piston Aluminum die-cast piston Sintered ir n design allows f r more precise piston dimensions, requiring no additional components, for improved durability and an exceptional fit Aluminum die-cast design requires a rubber O-ri g to prevent oil from bypas ing the valve • • 1 .75" (44.6mm) B re 1 .62" (41.1 m) Bore Larger bore size gives accessibility t finer tune he valving by allowing more hydraul c fluid to dissipate heat for better vehicle control • .05" Pressure tube withstanding pressure of 9KPSI .025" Pressure tube withstanding pressure of 3.2-4KPSI Thicker pressure tube provides th ability t handle more severe ro d conditions Thinner pressure tube thickness can cause bursting at the end caps and splitting at the tube seams under more extreme pressures • • Resistance weld with additional 360-degree weld where applicable 360-Degree arc weld 100% Resistance weld meets OE tensile strength and durability requirements • Monroe® Competitor Monroe® Competitor Monroe® Competitor Monroe® Competit r Monroe® Competitor Monroe® Competitor 1 2 3 4 5 6 8 7 Comparison based on analysis of sample p oduct manufactured by competito for the s me application. FEATURING A NI ROGEN GAS CHARGE T R DUCE AERATION, IMP OVING VEHICLE CONTROL AND PERFORM NCE CHART ABOVE TO COMPARE MAGNUM ™ PRODUCTS WITH THE COMPETITION - DISCOVER THE MONROE® MITMENT TO QUALITY ONROE® MAGNUM ™ SHOCK ABSORBERS ARE BUILT BILITY, VEHICLE STABILITY AND DRIVER COMFORT Replacing worn shocks with Monroe ® Magnum ™ shock a reduce excessive vibration, resulting in longer tire life, and a lower cost per mile burized Piston Design 4 Bor Size Pressure Tube Thickness 6 Loop Weldi T chnique 7 5 PTFE Coated Bearing 2 Robust Hydraulic Lock-Out 3 od hrome rod rod trol ength design ntally ing l benefits, durability rod PTFE Coated bearing No bearing Reduces friction during operation between the rod and rod guide, improving durability • Robust hydraulic lock-out design Cross-drilled hole lock-out design Cross-drilled lock-out design can compromise the strength and support of the rod Hydraulic lock-out design prev nts over-extension of the suspension, top-out of the piston and averts damage to the seal assembly • • Sintered iro p ston Aluminum die-cast piston Sintered iron design allows for more precise piston dimensions, requiring no additional components, for improved durability and an exceptional fit Aluminum die-cast design requires a rubber O-ring to prevent oil from bypassing the valve • • 1 .75" (44.6mm) Bor 1 .62" (41.1mm) Bore Larger bore size gives accessibility to finer tune the valving by allowing more hydraulic fluid to dissipate heat for better vehicle control • .05" Pres ure tube withstanding ressure of 9KPSI .025" Pressure tube withstanding pressure of 3.2-4KPSI Thicker pressure tube provides the ability to handle more severe road conditions Thinner pressure tube thickness can cause bursting at the end caps and splitting at the tube seams under more extreme pressure • • Resistance weld wit addi on l 360-deg weld where applicab 360-Degree arc wel 100% Resistance we meets OE tensile str and durability requir • Monroe® Competitor Monroe® Competitor Monroe® Competitor Monroe® Com mpetitor Monroe® Competitor Monroe® Competitor 1 2 3 4 5 6 7 Comparison based on analysis of sample product manufactured by competitor for the same application. FEATURING A NITROGEN GAS CHARGE TO REDUCE AERATION, IMPROVING VEHICLE CONTROL AND PERF OMP E MAGNUM ™ PRODUCTS WITH THE COMPETITION - DISCOVER THE M ROE® AD AN AGE! TO QUALI Y CK ABSORBERS ARE BUILT L TY AND DRIV R COMFORT Replacing worn shocks with Monroe ® Magnum ™ shock absorbers can help reduce excessive vibration, r sulting in longer tire life, less downtime and a lower cost per mile Piston Design 4 Bore Siz Pressu e Tube Thick ess 6 Loop Welding Technique 7 5 R bust Hydraulic Lock-Out 3 d Robust hydraulic lock-out design Cross-drilled hole lock-out design Cross-drilled lock-out design can compromise the strength and s pport of the ro Hydraulic lock-out design prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly • • Sint red iro piston Aluminum die-cast piston Sintered ir n design allows for more precise piston dimensions, requiring no additional components, for improved durability and an exceptional fit Aluminum di -cast design requires a rubber O-ri g to prevent oil from bypas ing the valve • • 1 .75" (44.6mm) Bore 1 .62" (41.1 m) Bore Larger bore size gives accessibility to finer tune he valving by allowing more hydraul c fluid to dissipate heat for better vehicle control • .05" Pressure tube withstanding pressure of 9KPSI .025" Pressure tube withstanding pressure of 3.2-4KPSI Thicker pressure tube provides th ability to handle more severe ro d conditions Thinner pressure tube thickness can cause bursting at the end caps and splitting at the tube seams under more extreme pressures • • Resistance weld with addi on l 360-degree weld where applicable 360-Degree arc weld 100% Resistance weld meets OE tensile strength and durability requirements • Bush ng Design 8 Tenneco shouldered bushing Standard bushing Shouldered bushing a d bonded bushing with sleeve designs prevent bushing walkout for improved quality and durability • Monroe® Competitor Monroe® Competitor Monroe® Competitor Monroe® Competit r Monroe® Competitor 2 3 4 5 6 8 7 parison based on analysis of sample p oduct manufactured by competito for the s me application. FEATURING A NI ROGEN GAS CHARGE T R DUCE AERATION, IMP OVING VEHICLE CONTROL AND PERFORMANCE Monroe® Competitor E TO COMPARE MAGNUM ™ PRODUCTS WITH THE COMPETITION - DISCOVER THE MONROE® ADVANTAGE! T TO QUALITY SHOCK ABSORBERS ARE BUILT ABILITY AND DRIVER COMFORT Replacing worn shocks with Monroe ® Magnum ™ shock absorbers can help reduce excessive vibration, resulting in longer tire life, less downtime and a lower cost per mile Piston Design 4 Bore Size Pressure Tube Thickness 6 Loop We ding Techniqu 7 5 ted R bus Hydraulic Lock-Out 3 uring n the rod proving Robust hydraulic lock-out design Cross-drilled hole lock-out design Cross-drilled lock-out design can compromise the strength and support of the rod Hydraulic lock-out design prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly • • Sin ered iron piston Aluminum die-cast piston Sintered iron design allows for more precise piston dimensions, requiring no additional components, for improved durability and an exceptional fit Aluminum die-cast design requires a rubber O-ring to prevent oil from bypassing the valve • • 1 .75" (44.6mm) Bore 1 .62" (41.1mm) Bore Larger bore size gives accessibility to finer tune the valving by allowing more hydraulic fluid to dissipate heat for better vehicle control • .05" Pressure tube withstanding pressure of 9KPSI .025" Pressure tube withstanding pressure of 3.2-4KPSI Thicker pressure tube provides the ability to handle more severe road conditions Thinner pressure tube thickness can cause bursting at the end caps and splitting at the tube seams under more extreme pressures • • Resistance weld with additional 360-degree wel where applicable 360-Degree arc weld 100% Resistance weld meets OE tensile strength and durability requirements • Bushing Design 8 Tenneco shouldered bushing Standard bushing Shouldered bushing bonded bushing with sleeve designs preve bushing walkout for improved quality and durability • Monroe® Competitor Monroe® Competitor Monroe® Competitor Monroe® Competitor mpetitor Monroe® Competitor 2 3 4 5 6 8 7 Compari son based on analysis of sample product manufactured by competitor for the same application. FEATURING A NITROGEN GAS CHARGE TO REDUCE AERATION, IMPROVING VEHICLE CONTROL AND PERFORMANCE Monroe® Comp UM ™ PRODUCTS WITH THE C MPE ITION - DISCOVER THE M ROE® ADVANTAGE! LI Y ARE BUILT COMFORT Replacing worn shocks with Monr e ® Magnum ™ s ock absorbers can help reduce excessive vibration, r sulting in longer tire life, less downtime and a lower cost per mile Piston Desig 4 Bore Size Pressure Tube Thick ess 6 Loop W lding Technique 7 5 lic t n ut Sint red iro piston Aluminum die-cast piston Sintered iron design allows for mor precise piston dimension , r quiring no additi nal components, for improved durability and an exceptional fit Aluminum die-cast design requires a rubber O-ring to prevent oil from bypa sing the valve • • 1 .75" (44.6mm) Bore 1 .62" (41.1mm) Bore Larger bor size gives accessibility to fin r tune the valv ng by allowing more hy raulic f uid to dissipate heat f r better vehicle control • .05" Pressure tube withstanding pressure of 9KPSI .025" Pressure tube withstanding pressure of 3.2-4KPSI Thicker pressure tube provides the ability to handle more severe road conditions Thinner pressure tube thickness can cause bursting at the end caps and splitting at the tube seams under more extreme pressures • • Resistance weld with addition l 360- e ree weld where applicable 360-Degree rc weld 100% Resistance weld meets OE tensile strength and dur bility requirem nts • Bush ng Design 8 Tenneco shouldered bushing Standard bushing Shouldered bushing and bonded bushing with sleeve designs prevent bushing walkout for improved quality and durability • r Monroe® Competit r Monroe® Competitor Monroe® Competitor Monroe® Competitor 3 4 5 6 8 7 f sample pr oduct manufactured by co et itor for he same application. F ATURING A NITROGEN GAS CHARGE T R DUCE AERATI N, IMPROVING VEHICLE CONTROL AND PERFORMANCE Monroe® Competit r ALITY RS ARE BUILT ER COMFORT Replacing wor shocks with Monroe ® Magnum ™ shock absorbers can help reduce excessive vibration, resulting in longer tire life, less downtime and a lower cost per mile Pi ton Desig 4 B re Size Pressure Tube Thickness 6 Loop Welding Technique 7 5 ydraulic out omise upport design Sintered iron p to Aluminum die-cast piston Sintered iron design allows for more precise piston dimensions, requiring no additional components, for improved durability and an exceptional fit • 1 .75" (44.6mm) Bore 1 .62" (41.1mm) Bore Lar ger bore size gives accessibility to finer tune the valving by allowing more hydraulic fluid to dissipate heat for better vehicle control • .05" Press r tube withs andi g pressure of 9KPSI .025" Pressure tube withstanding pressure of 3.2-4KPSI Thicker pressure tube provides the ability to handle more severe road conditions Thinner pressure tube • • Resistance weld with additional 360-degree weld where applicable 360-Degree arc weld 100% Resistance weld meets OE tensile strength and durability requirements • Bushi g Design 8 Tenneco shouldered bushing Standard bushing Shouldered bushing and bonded bushing with sleeve designs prevent bushing walkout for improved quality and durability • mpetitor Monroe® Competitor Monroe® Competitor Monroe® Competitor Monroe® Competitor 3 4 5 6 8 7 FEATURING A NITROGEN GAS CHARGE TO REDUCE AERATION, IMPROVING VEHICLE CONTROL AND PERFORMANCE Monroe® Competitor placing worn shocks with Monroe ® Magnum ™ s ock absorbers can h lp uce excessive vibration, resulting in lo ger tire life, less dow time d a lower cost per mile Bore Siz Pressu Tube Thickness 6 Loop W ding Techniqu 7 5 n ws 1 .75" (44.6mm) Bore 1 .62" (41.1 m) Bor Large r bor size gives accessibility to fin r tune the valving by allowing more hy raulic f uid to dissipate heat f r bette vehicle control • .05" Pressure tube withstanding pressure of 9KPSI .025" Pressure tube withstanding pressure of 3.2-4KPSI Thicker p essure tube provides the a ili handle more severe road conditions Thinner pressure tube • • Resistance weld with additional 360- egree weld where applicable 360-Degree rc weld 100% Resistance weld meets OE tensile strength and durability requirem nts • Bush g Design 8 Tenneco shouldered bushing Standard bushing Shouldered bush ng and bonded bushing with sleeve designs prevent bushing walkout for improved quality and durability • Monroe® Competitor Monroe® Competitor Monroe® Competitor 3 4 5 6 8 7 A URING A NITROGEN GAS CHARGE T R DUCE RATI N, IMPROVING VEHICLE CONTROL AND PERFORMANCE Monroe® Competitor 1 2 3 4 5 6 7 8 MONROE ® MAGNUM ™ SHOCK ABSO BERS ARE BUILT FOR DURABILITY, VEHICLE STABILITY AND DRIVER COMFORT FEATURING A NITROGEN GAS CHARGE TO REDUCE AERATION, IMPROVING VEHICLE CONTROL AND PERFORMANCE 1 5 2 6 3 7 4 8 Febru ry 24, 2020 (38Mo roe PreFitted Tie Strap) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

25Holland Landing Gear Identification Landing Gear Model Identification ATLAS 55 51000 ATLAS 65 50000 FG4000 CMS2 SLIM BAND TAPERED MOUNTING PLATE 2-SHAFT SLIM GEAR BOX 3-SHAFT GEAR BOX - TRIANGLE SHAPE 3-SHAFT GEAR BOX - TRIANGLE SHAPE SLIM BAND 2-PIECE HEXAGONAL FIT BUSHING MOUNTING PLATE SIDE 2-PIECE HEXAGONAL FIT BUSHING MOUNTING PLATE SIDE 3.91 3.91 WIDE BAND 2-SHAFT CONSTANT MESH GEAR DESIGN TUBE SIZE IS LARGER THAN CLASSIC TUBE ROUND BUSHING MOUNTING PLATE SIDE 3-SHAFT GEAR BOX - TRIANGLE SHAPE WITH SLIM INNER GEARBOX COVER AND CONSTANT MESH GEAR DESIGN HEXAGONAL SLIP FIT BUSHINGS MOUNTING PLATE SIDE 2.83 OPTIONAL LOW PROFILE RCF NOT AVAILABLE ON 50000 HEXAGONAL SLIP FIT BUSHINGS MOUNTING PLATE SIDE 2.83 OPTIONAL LOW PROFILE RCF NOT AVAILABLE ON 51000 3-SHAFT GEAR BOX - TRIANGLE SHAPE WITH SLIM INNER GEARBOX COVER AND CONSTANT MESH GEAR DESIGN Landing Gear Model Identification ATLAS 55 51000 ATLAS 65 50000 FG4000 CMS2 SLIM BAND TAPERED MOUNTING PLATE 2-SHAFT SLIM GEAR BOX 3-SHAFT GEAR BOX - TRIANGLE SHAPE 3-SHAFT GEAR BOX - TRIANGLE SHAPE SLIM BAND 2-PIECE HEXAGONAL FIT BUSHING MOUNTING PLATE SIDE 2-PIECE HEXAGONAL FIT BUSHING MOUNTING PLATE SIDE 3.91 3.91 WIDE BAND 2-SHAFT CONSTANT MESH GEAR DESIGN TUBE SIZE IS LARGER THAN CLASSIC TUBE ROUND BUSHING MOUNTING PLATE SIDE 3-SHAFT GEAR BOX - TRIANGLE SHAPE WITH SLIM INNER GEARBOX COVER AND CONSTANT MESH GEAR DESIGN HEXAGONAL SLIP FIT BUSHINGS MOUNTING PLATE SIDE 2.83 OPTION L LOW PROFILE RCF NOT AVAILABLE ON 50000 HEXAGONAL SLIP FIT BUSHINGS MOUNTING PLATE SIDE 2.83 OPTION L LOW PROFILE RCF NOT AVAILABLE ON 51000 3-SHAFT GEAR BOX - TRIANGLE SHAPE WITH SLIM INNER GEARBOX COVER AND CONSTANT MESH GEAR DESIGN Landing Gear Model Identification Landing Gear Model Identification ATLAS 55 51000 ATLAS 65 50000 FG4000 CMS2 SLIM BAND TAPERED MOUNTING PLATE 2-SHAFT SLIM GEAR BOX 3-SHAFT GEAR BOX - TRIANGLE SHAPE 3-SHAFT GEAR BOX - TRIANGLE SHAPE SLIM BAND 2-PIECE HEXAGONAL FIT BUSHING MOUNTING PLATE SIDE 2-PIECE HEXAGONAL FIT BUSHING MOUNTING PLATE SIDE 3.91 3.91 WIDE BAND 2-SHAFT CONSTANT MESH GEAR DESIGN TUBE SIZE IS LARGER THAN CLASSIC TUBE ROUND BUSHING MOUNTING PLATE SIDE 3-SHAFT GEAR BOX - TRIANGLE SHAPE WITH SLIM INN R GEARBOX COVER AND CONSTAN MESH GEAR DESIGN HEXAGONAL SLIP FIT BUSHINGS MOUNTING PLATE SIDE 2.83 OPTIONAL LOW PROFILE RCF NOT AVAILABLE ON 50000 HEXAGONAL SLIP FIT BUSHINGS MOUNTING PLATE SIDE 2.83 OPTIONAL LOW PROFILE RCF NOT AVAILABLE ON 51000 3-SHAFT GEAR BOX - TRIANGLE SHAPE WITH SLIM INN R GEARBOX COVER AND CONSTAN MESH GEAR DESIGN Landing Gear Model Identification CATALOG NUMBER 25 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 25Holland Landing Gear Identification XL-LG11389PM-en-US Rev F 08- MARK V 1-4 XL-LG11389PM-en-US Rev F 08-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc. MARK V MARK V HD TAPERED MOUNTING PLATE 1-4 MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 XL-LG11389PM-en-US Rev F 08-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc. CLASSIC CMS3 MARK V MARK V HD 3-SHAFT GEAR BOX - TRIANGLE SHAPE WIDE BAND TAPERED MOUNTING PLATE SLIM BAND TUBE SIZE IS SMALLER THAN CMS TUBE 2-SHAFT CONSTANT MESH GEAR DESIGN HEXAGONAL SLIP FIT BUSHINGS MOUNTING PLATE SIDE 1-4 XL-LG11389PM-en-US Rev F 08-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc. CLASSIC CMS3 MARK V MARK V HD 3-SHAFT GEAR BOX - TRIANGLE SHAPE WIDE BAND TAPERED MOUNTING PLATE SLIM BAND N SH N EXAGONAL SLIP FIT BUSHINGS MOUNTING PLATE SIDE Trailer Jacks Model Identification Dual-Pin Drop Leg 4700 Series 4701 Series 48000 Series 49000 Gooseneck Anti-Nose Dive DROP LEG DROP LEG DROP LEG DROP LEG Trailer Jacks Model Identification al-Pin Drop Leg 4700 Series 4701 Series 48000 Series 49000 Gooseneck Anti-Nose Dive G DROP LEG G P LEG Trailer Jacks Model Identification eg 4700 Series 4701 Series 49000 Gooseneck Anti-Nose Dive DROP LEG XL-LG11389PM-en-US RevF 08-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc. Dual-Pin Drop Leg 4700 S 48000 Series 49000 Go JS150-SB DROP LEG DROP LEG DROP LEG DROP LEG XL-LG11389PM-en-US RevF 08-2014 Amendments and errors reserved. © SAF-HOLLAND, Inc. Dual-Pin Drop Leg 4700 Series 48 00 Series 49000 Gooseneck JS150-SB JS-2000 DROP LEG DROP LEG DROP LEG DROP LEG ler Jacks Model Identification 4701 Series Anti-Nose Dive XL-LG11389PM-en-US RevF 08-2014 Amendments and errors res rved. © SAF-HOLLAND, Inc. Dual-Pin Drop Leg 4700 Series 4701 Series 48000 Series 9 00 Gooseneck Anti-Nose Dive JS150-SB J -2000 JS300 DROP LEG DROP LEG DROP LEG DROP LEG XL-LG11389PM-en-US RevF 08-2014 Amendm nts and errors res rved. © SAF-HOLLAND, Inc. Dual-Pin Drop Leg 4700 Seri s 4701 Seri s 48000 Series 49 0 Goo eneck Anti-Nose Dive JS150-SB JS-2000 JS300 DROP LEG DROP LEG DROP LEG DROP LEG 1-5 XL-LG11389PM-en US RevF 08-2014 Ame dments and erro s reserv d. © SAF-HOLLAND, Inc. Dual-Pin Drop Leg 470 Series 4701 Series 480 Series 4900 Gooseneck Anti-Nose Dive JS15 -SB JS-20 0 JS30 DROP LEG P LE DROP LEG DROP LEG 1-5 August 2018 (25Holland Landing Gear Identification) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

39Centramatic Wheel Balancers • Extend tire life 25-50% • Solve vibration problems • Automatically balance while you drive • Help prevent tire cupping • Tires run 8-10% cooler Patented Centramatic Balancers are a unique line of “On Board” Balancing Systems for tires and wheels that maximize tire life and smooth your ride. Mounted behind the wheel they offer permanent solutions for balancing assemblies. Centramatic Balancers operate automatically and can adjust instantly for changing conditions. WHEEL BALANCERS SEE BACK FOR ADDITIONAL APPLICATIONS MAXIMIZE Your Tire Life! P/N CEN800820 Aluminum Rims Fitment on 2012 Class 8 - 80,000 GVW Trucks Steer Axles - These trucks must meet new shorter stopping distances. They are able to achieve this new shorter stopping distance by using disk or 16.5” drum brakes Do not use on Peterbilt’s 22.5” Rim 88667x CEN800820 CATALOG NUMBER 39 www.midwestwheel.com Order NLINE ™ www.midwestwheel.com Order NLINE ™ Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Centramatic Wheel Balancers MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 Wheel Size Bolt Holes Bolt Circle Axle Part No. Brake Type 22.5" 10 11.25" Steer CEN600630 15" Drum Brakes Only 22.5" 10 11.25" Rear CEN600640 15" Drum or Disc Brakes 24.5" 10 11.25" Steer CEN600650 15" Drum Brakes Only 24.5" 10 11.25" Rear CEN600660 15" Drum or Disc Brakes 600 SERIES Wheels For Heavy Duty Trucks, Large Motor Homes CEN600630 CEN600650 CEN600660 CEN600640 800 SERIES For Special Application, HD Axles with 16.5” Drum or Disc Brakes & Aluminum Wheels CEN800820 DO NOT install if valve stem contacts balancer. Bend valve stem or replace if necessary. Wheel Size Bolt Holes Bolt Circle Axle Part No. Brake Type 22.5" / 24.5" Steel or Aluminum 10 11.25" Steer CEN800820 16.5" Drum or Disc Brakes 22.5" Aluminum 10 11.25" Steer CEN800830 16.5" Drum Brakes (Floatation/Duplex) 24.5" Steel or Aluminum 10 11.25" Steer CEN800820 16.5" Drum Brakes (Floatation/Duplex) 22.5" Steel or Aluminum 10 11.25" Rear CEN800820 16.5" Drum or Disc Brakes (Super Single) 900 SERIES For Special Application, HD Axles with 16.5” Brakes & Steel Wheels Wheel Size Bolt Holes Bolt Circle Axle Part No. Brake Type 22.5" / 24.5" Steel 10 11.25" Steer CEN900-910 16.5" Drum Brakes Only CEN900910 July 2016 (39Centramatic Wheel Balancers) For Peterbilt Designer 22.5" Rims (88667X) use CEN800822 For Technical Support Call 800-523-8473 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

38Continental Air Springs Common List CATALOG NUMBER 38 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ ContiTech P/N Prime Ride P/N Application OEM PN Style Base Height* Min-Max Height** Cross Reference CAS64645 CAS73401 Hendrickson S-20900, S-21800 Rolling Lobe 4.75 4.90-19.30 W01-358-8709 CAS64266 CAS73389 Freightliner 681-320-0017 Rolling Lobe 6.90 8.75-23.00 W01-358-9781 CAS67473 CAS73400 Freightliner 16-13810-000 6.90 8.75-23.00 W01-358-9780 CAS64274 CAS73569 Peterbilt 03-02456, 03-04759 Rolling Lobe 4.78 7.50-18.00 W01-358-9069 CAS68161 - Freightliner 18-52651-000 Sleeve Spring 1.92 5.60-12.10 W01-358-7215 CAS64421 CAS73592 Hendrickson C-20901 Rolling Lobe 4.75 6.10-19.00 W01-358-8091 CAS67588 - Hendrickson S-28929 Rolling Lobe 5.67 7.80-19.60 W01-358-9978 CAS66666 - Peterbilt/Kenworth 03-08716, C81-1011 Rolling Lobe 6.77 7.80-25.20 W01-358-8864 CAS67452 - Freightliner 18-29919-000 Sleeve Spring 1.92 3.00-7.50 W01-358-7202 CAS64394 CAS73591 Hendrickson S-20127 Rolling Lobe 5.75 7.40-24.20 W01-358-9580 CAS73746 CAS79121 Navistar 3541731C1, 350243C94 Rolling Lobe 5.35 6.90-23.60 W01-358-1191 CAS64638 CAS77010 Multiple Trailer S-21966, 1R13-250 Rolling Lobe 6.40 9.00-20.60 W01-358-8708 CAS64254 CAS73567 Multiple Trailer S-4771, 23631-01 Rolling Lobe 3.90 5.75-18.40 W01-358-8050 CAS64287 CAS73599 Hendrickson S-20010 Rolling Lobe 3.90 5.60-16.50 W01-358-9270 CAS64571 - Hendrickson 003316, B-14487 Triple Conv. NA 4.60-18.90 W01-358-8033 CAS64517 - Watson/Chalin AS-0058 Double Conv. NA 3.00-10.50 W01-358-6897 CAS64636 CAS73565 Hendrickson S-22948 Rolling Lobe 5.40 8.50-20.50 W01-358-8713 CAS64288 CAS77289 Hendrickson S-20124 Rolling Lobe 5.75 7.40-24.90 W01-358-9265 CAS65990 - Peterbilt/Kenworth C81-6000, C81-1003 Rolling Lobe 4.76 7.10-18.80 W01-358-8813 CAS68359 CAS73880 Kenworth K-303-22 Rolling Lobe 2.80 3.90-11.50 W01-358-9622 CAS67586 - SAF Holland 90557332 Rolling Lobe 5.59 7.30-22.90 W01-358-9974 CAS64397 CAS73590 Hendrickson S-22045, S-21623 Rolling Lobe 5.75 7.10-19.00 W01-358-8755 CAS65593 - Multiple Trailer C-25873, AS-0159 Rolling Lobe 4.74 5.10-19.40 W01-358-8774 CAS74884 - Mack/Volvo 57QL54M, 3934699 Rolling Lobe 5.35 6.90-22.60 W01-358-8829 CAS73770 CAS77300 Navistar 2027911C1 Rolling Lobe 5.35 6.90-21.60 W01-358-9648 CAS64284 - Multiple Trailer 18813-01, C0073 Double Conv. NA 4.96-14-40 W01-358-7555 * Base Height excludes Stud (if applicable) in inches. ** Min-Max Height = Bottom of base (excluding stud) to top to top plate in inches. ContiTech 100% OE Quality The ContiTech premium brand brings together our pooled expertise as a development partner to, and OEM for, the major companies worldwide. ContiTech air springs are specially developed as original equipment. The brand therefore guarantees the ultimate in quality criteria and meets the stringent requirements of vehicle manufacturers in the international aftermarket. The ContiTech premium brand offers you: ▪ 100 % OE quality ▪ Global availability ▪ Complete OEM range ▪ Precisely configured suspension characteristics ▪ Maximum service life ▪ Maximum load capacity ▪ Simple and precise fitting PRIME–RIDE PRIME-RIDE ® has been an established brand for commercial vehicle air springs with an attractive price/ performance ratio since 1998. The PRIME-RIDE offers you: ▪ High quality ▪ Excellent availability (ex stock) ▪ The major commercial vehicle applications ▪ Balanced suspension characteristics ▪ Effective service life ▪ Good load capacity ▪ Simple and precise fitting Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Continental Air Springs Common List MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 December 23, 2019 (38Continental Air Springs Common List) Goodyear Cross Reference * Base Height excludes Stud (if applicable) in inches. ** Min-Max Height = Bottom of base (excluding stud) to top to top plate in inches. ContiTech P/N Prime Ride P/N Application OEM PN Style Base Height* Min-Max Height** Cross Reference CAS64645 CAS73401 Hendrickson S-20900, S-21800 Rolling Lobe 4.75 4.90-19.30 1r13-159 CAS64266 CAS73389 Freightliner 681-320-0017 Rolling Lobe 6.90 8.75-23.00 1r12-603 CAS67473 CAS73400 Freightliner 16-13810-000 6.90 8.75-23.00 1r12-303 CAS64274 CAS73569 Peterbilt 03-02456, 03-04759 Rolling Lobe 4.78 7.50-18.00 1r12-069 CAS68161 - Freightliner 18-52651-000 Sleeve Spring 1.92 5.60-12.10 1s5-175 CAS64421 CAS73592 Hendrickson C-20901 Rolling Lobe 4.75 6.10-19.00 1r14-171 CAS67452 - Freightliner 18-29919-000 Sleeve Spring 1.92 3.00-7.50 1s5-176 CAS64394 CAS73591 Hendrickson S-20127 Rolling Lobe 5.75 7.40-24.20 1r13-118 CAS73746 CAS79121 Navistar 3541731C1, 350243C94 Rolling Lobe 5.35 6.90-23.60 1r12-432 CAS64638 CAS77010 Multiple Trailer S-21966, 1R13-250 Rolling Lobe 6.40 9.00-20.60 1r13-177 CAS64254 CAS73567 Multiple Trailer S-4771, 23631-01 Rolling Lobe 3.90 5.75-18.40 1r14-039 CAS64287 CAS73599 Hendrickson S-20010 Rolling Lobe 3.90 5.60-16.50 1r13-119 CAS64571 - Hendrickson 003316, B-14487 Triple Conv. NA 4.60-18.90 3b12-312 CAS64517 - Watson/Chalin AS-0058 Double Conv. NA 3.00-10.50 2b9-229 CAS64636 CAS73565 Hendrickson S-22948 Rolling Lobe 5.40 8.50-20.50 1r13-176 CAS64288 CAS77289 Hendrickson S-20124 Rolling Lobe 5.75 7.40-24.90 1r12-375 CAS68359 CAS73880 Kenworth K-303-22 Rolling Lobe 2.80 3.90-11.50 1r11-221 CAS67586 - SAF Holland 90557332 Rolling Lobe 5.59 7.30-22.90 1r12-1048 CAS64397 CAS73590 Hendrickson S-22045, S-21623 Rolling Lobe 5.75 7.10-19.00 1r13-124 CAS65593 - Multiple Trailer C-25873, AS-0159 Rolling Lobe 4.74 5.10-19.40 1r14-172 CAS74884 - Mack/Volvo 57QL54M, 3934699 Rolling Lobe 5.35 6.90-22.60 1r12-615 CAS73770 CAS77300 Navistar 2027911C1 Rolling Lobe 5.35 6.90-21.60 1r12-538 CAS64284 - Multiple Trailer 18813-01, C0073 Double Conv. NA 4.96-14-40 2b12-440 CAS64339 - Peterbilt 03-07887 Rolling Lobe 5.59 6.70-24.60 1r12-568 CAS64255 CAS73568 Multiple S-13032, K-303-6 Rolling Lobe 2.80 3.90-14.40 1r11-028 CAS68151 - SAF Holland 90557373, 50857000 Rolling Lobe 2.80 4.50-15.50 1r12-1047 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

19Top Plate Rebuild v Replacement Tech Tip TECH Tips CATALOG NUMBER 19 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ Introduction Holland fifth wheels are designed to provide years of durable, reliable service to our customers. However, as with all components subject to wear, there may come a time when rebuilding of the lock mechanism, or replacement of the entire top plate, will be required to restore the fifth wheel to its optimum performance condition. This bulletin is a checklist that will assist in making the choice between rebuilding or replacement of your fifth wheel. Inspection Preparation The fifth wheel top plate should be removed from the tractor and sufficiently cleaned before working through the checklist (Figure 1) . This will allow the inspector to fully evaluate the points in the check list. IMPORTANT: See your Owner’s Manual for proper removal of your fifth wheel model. This checklist applies to all Holland XA-351, XA-311, XA-AL, XA-331, XA-231, XA-17, XA-S1, XA-S2, XA-201, XA-3501, and XA-2009 Series top plates — except where noted. If the inspector answers YES to any of the criteria, the top plate assembly is NOT a candidate for rebuilding, and should be replaced with an appropriate Holland replacement top plate. If you answer NO to all of the criteria, the lock mechanism and fifth wheel top plate are good candidates for rebuilding. Inspection Check List YES NO 1. Perform a thorough inspection of the entire fifth wheel casting. Were any cracks discovered? 2. Is there any evidence of weld repair on the casting? 3. Measure the flatness of the top surface of the fifth wheel casting using a straight edge that reaches across the top plate from one side to the other. Is the top plate surface warped by more than 1/8˝ (Figure 2) ? NOTE: By holding the straight edge flat to the fifth wheel surface on one side of the center of the fifth wheel, and measuring the gap on the opposite side, you can accomplish this measurement. continued XL-SB058-01 Rev A · 2009-12-09 · © SAF-HOLLAND, Inc. Figure 1 AREA OF EXAMINATION (FOR FIGURES 3 AND 4) Service Bulletin Holland Fifth Wheels Top Plate Rebuild vs. Replacement Criteria Inspection Check List XA-351, XA-311, XA-331, XA-AL, XA-17, XA-S1, XA-S2, XA-201, XA-231, XA-3501, and XA-2009 Series Top Plates Figure 2 Top Plate Rebuild vs. Replacement Criteria Inspection Check List XA-351, XA-311, XA-331, XA-AL, XA-17, XA-S , XA-S2, XA-201, XA-231, XA-3501, and XA-2009 Series Top Plates Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 19Top Plate Rebuild v Replacement Tech Tip MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 Service Bulletin SAF-HOLLAND USA, Inc. · 888.396.6501 · Fax 800.356.3929 SAF-HOLLAND Canada Limited · 519.537.3494 · Fax 800.565.7753 Western Canada · 604.574.7491 · Fax 604.574.0244 www.safholland.us XL-SB058-01 Rev A · 2009-12-09 · Amendments and errors reserved · © SAF-HOLLAND, Inc. 1.50(38.10) MAX. 1.45(36.83) NEW R Figure 4 .04 (1.02) MIN. .06 (1.52) NEW HINGED LOCK CASTING Figure 3 SECTION VIEW Inspection Check List YES NO 4. Is there evidence of damage to the top surface of the casting in the area where the lock components move to their open position during uncoupling (Figure 3) ? NOTE: The lock components should move freely into their unlocked position in the casting with a .040˝ minimum vertical clearance to the casting, both above and below the lock. 5. Check the tightness of the lock pin(s) to the fifth wheel. Can the lock pins rotate in the fifth wheel? Is there evidence of rotation exhibited in the holes in the casting? NOTE: This inspection only applies to XA-351, XA-311, XA-331, and XA-3501 top plates. 6. Inspect the top surface of the top plate for evidence of excessive wear. Is there any point on the top plate surface where the grease groove pattern has been worn away? 7. Inspect the inside pocket area of the casting where the bracket is mounted. Is there evidence of excessive wear to the grease groove in the pocket area? NOTE: This inspection only applies to XA-3501 and XA-2009 top plates. 8. Check the tightness of the bracket pins to the fifth wheel casting. Can the bracket pins rotate freely in the casting, and/or can the replacement pin be installed easily by hand? NOTE: This inspection only applies to XA-3501 and XA-2009 top plates. 9. Check the radius of the front lock of the casting using a radius gauge. Is the radius 1.5˝ or greater (Figure 4) ? NOTE: This inspection does not apply to XA-311, XA-3501, or XA-2009 top plates. If the inspector answers YES to any of the criteria, the top plate assembly is NOT a candidate for rebuilding, and should be replaced with an appropriate Holland replacement top plate. If you answer NO to all of the criteria, the lock mechanism and fifth wheel top plate are good candidates for rebuilding. March 19, 2020 (19Top Plate Rebuild v Replacement Tech Tip) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

20Bladwin New Products CATALOG NUMBER 20 www.midwestwheel.com Order NLINE ™ www.midwestwheel.com Order NLINE ™ BF PA32003 EnduraCube Air Element Baldwin’s EnduraCube air filter with new proprietary, depth-loading media technology reliably traps and holds dirt throughout the entire service interval without fail. The PA32003’s durable construction includes solid plastic frame and end caps which add structural strength and stability while protecting the media from rips, tears and punctures. APPLICATIONS Kenworth T680, T800, Peterbilt 579 Trucks CROSS-REFERENCE Paccar P621730; Donaldson P637454 SPECIFICATIONS Size: 19 1/32 x 8 13/32 x 7 9/32 (483.1 x 213.4 x 184.7) A. Gskt.: [1] Included NEW PRODUCTS MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 August 5, 2019 (20Bladwin New Products) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 20Bladwin New Products NEW PRODUCTS BF PF46082 Fuel Element Trucks need to be moving equipment and freight on the road and not sitting in a shop with unexpected repairs or other downtime. Keep your vehicles where they should be by using the Baldwin PF46082 fuel filter element. Excellent contaminant removal is achieved along with water and other particulates from the fuel systems of your Kenworth and Peterbuilt trucks, as the OE requires. BF PF46081 Fuel Element The demands for fuel system protection at OE and higher protection levels are reached with the PF46081 fuel element. Contaminant removal and water removal are needed and achieved at OE or better requirement levels allowing your Kenworth and Peterbuilt trucks to keep moving and not in the shop for repairs and unneeded early maintenance stops. Protect your trucks with the best option out there - Baldwin PF46081. 1st to Aftermarket 1st to Aftermarket APPLICATIONS Kenworth T660 with Cummins ISX15 Engine, T680, T800, T880, W900 with Cummins ISX 15.0 Engine, T800 with Cummins X15 Engine, T660 with Paccar MX-13 Engine; Peterbilt 365 with Cummins ISX 11.9 Engine, 367, 567, 587 with Cummins ISX 15.0 Engine CROSS-REFERENCE Paccar K371011, K371029 Luber-finer L5111F SPECIFICATIONS O.D.: 4 1/8 (104.6) I.D.: 13/16 (20.3) One End Length: 7 3/16 (182.7) APPLICATIONS Kenworth T660 with Paccar MX-13 Engines, T680, T800, T880 with Paccar MX-11, MX-13 Engines, W900 with Cummins ISX 15.0, Paccar MX-14 Engines; Peterbilt 520 with Paccar MX-11 Engine, 365, 367, 389, 567, 579 with MX-13 Engine CROSS-REFERENCE Paccar K371012 SPECIFICATIONS O.D.: 4 1/8 (104.6) I.D.: 13/16 (20.3) One End Length: 7 3/16 (182.7) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

20Luberfiner LFF6776XL Fuel Filter CATALOG NUMBER 20 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ NEW PRODUCT ANNOUNCEMENT LF LFF6776XL FUEL FILTER HIGH EFFICIENCY HIGH CAPACITY FITS THESE POPULAR ENGINES: • Cummins ISX Series (11.9L & 15.0L) • Cummins X15 Series (15.0L) MEETS OE PERFORMANCE SPECS AND TOLERANCES FOR: • Capacity, Efficiency, Restriction CROSSES TO: • Fleetguard FF5825NN • Baldwin BF46129 • Donaldson DBF6776 USED IN THESE TRUCKS & BUSES: Freightliner 122SD, Cascadia, Coronado SD Peterbilt 320, 357, 367, 384, 386, 389, 567, 579, 587 Volvo VNL 630, 730, 780 Van Hool C2045, CX45, T2100, TD925, TDX, TX Western Star 4900 EX, FA, SA International 9900i, HX520, LoneStar, LT625, ProStar Kenworth C500, C550, T660, T680, T700, T800, T880, W900 Motor Coach Industries D4005, J4500, J4505 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 20Luberfiner LFF6776XL Fuel Filter RESTRICTION COMPARISON 0.00 1.00 2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00 OE Filter Initial Restriction (PSI) LFF6776XL Initial (5 Microns) Final (10 Microns) CAPACITY COMPARISON EFFICIENCY COMPARISON 70.00 60.00 65.00 55.00 50.00 45.00 40.00 0.00 OE Filter Capacity (G) LFF6776XL 63.24 62.17 1.70 0.85 ISO4548-4 ISO4548-1 ISO4548-4 LFF6776XL OE Filter Efficiency (%) 94 95 96 97 98 99 100 98.75 100 100 100 Luber-finer - U.S.A. Hotline: 800-882-0890 • www.luberfiner.com IN-HOUSE TESTING LFF6776XL VS. OE FILTER MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 July 13, 2018 (20Luberfiner LFF6776XL Fuel Filter) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

15Butane Torches BUTANE TORCHES & REFILLS CATALOG NUMBER 15 www.midwestwheel.com Order NLINE ™ www.midwestwheel.com Order NLINE ™ P/N KS T-MTC-51 • Plastic canister torch • Self-igniting, Piezo Electronic Ignition System • 2500°F / 1300°C • 120 minutes of continuous use • Refillable • Windproof flame • Hand held or table top • Butane not included BUTANE-POWERED MICROTORCH P/N HDA83-6525 • Hands free - slide lock for continuous use and instant operation • Ergonomic handle design ensures a non-slip grip • Removable base for table-top or hand-held use • 60 minute continuous run time with a full charge • Maximum Temperature Rating: 1300°C (2500°F) • Instant Off safety switch • Adjustable flame: Pin point torch to a heavy duty broad flame • Butane not included TRIGGER TORCH • Best for small jobs and quick repairs • Lifetime waterproof ignition system • Refillable tank provides up to 30 minutes of butane capacity • Adjustable gas flow with wind-proof flame • Protective flip-open cap • See through fuel tank • Child resistance P/N PH 4-054 MINI-JET TORCH P/N ISNMAS51773-24H • For Phillips & NSPA Torches • 5-1/8 oz. ULTRATANE BUTANE Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 15Butane Torches March 18, 2020 (15Butane Torches) PROPANE & ACCESSORIES Disposable Fuel Cylinder Propane, 14.1 oz P/N WG 5UX34 Hand Torch w/ Cylinder, Propane Fuel, Instant On/Off Ignitor P/N WG 52RM88 • Ergonomically Designed Comfort Grip • Stainless Steel Burn Tube For Durability • Adjustable Flame Control • General Purpose Flame • Propane BTUs per Hour: 225,000 to 375,000 • Soft Solder Tube Cap.: 1/8”-1” • Propane Temp 3450 ° F • Includes 14.1 oz Propane Fuel Cylinder MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

15Phillips X Tend Tracker Bar Extension New Day Cab CATALOG NUMBER 15 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ X- TEND Tracker Bar Extension NOW AVAILABLE FOR DAY CABS Prevent cables from banging against the back of the cab. • The ONLY tracker bar extension for day cabs • Extends cables out an additional 8” from the tracker bar • Improve resale value and avoid costly repairs • Decreases driver distraction from the noise of banging cables • Snaps on. No hardware or tools needed! • Stainless steel tubing and eye hook • Non-corrosive mounting and support brackets For new and innovative products, visit www.phillipsind.com 12070 Burke Street, Santa Fe Springs, CA 90670 800.423.4512 CD1074_200717_REV1 X - TEND Tracker Bar Extension NOW AVAILABLE FOR DAY CABS Prevent cables from banging against the back of the cab. • The ONLY tracker bar extensio for day cabs • Extends cables out an additional 8” from the tracker bar • Improve resale value and avoid costly repairs • Decreases driver distraction from the noise of banging cables • Snaps on. No hardware or tools needed! • Stainless steel tubing and eye hook • Non-corrosive mounting and support brackets Part No. 17-35 X-TEND ® Day Cab tra for 3/4" diameter trac Part No. 17-35 X-TEND ® Day Cab tra for 1" diameter track WE MAKE PRODUCTS THAT MAKE A DIFFERENCE ® TEND ® Bar Extension LABLE FOR DAY CABS from banging against the b. bar extension for day cabs ut an additional 8” from the tracker bar lue and avoid costly repairs distraction from the noise of banging cables dware or tools need d! bing and eye hook unting and support brackets Part No. 17-3500 X-TEND ® Day Cab tracker ba r extension for 3/4" diameter tracker bars Part No. 17-3501 X-TEND ® Day Cab tracker bar extension for 1" diameter tracker bars PH 17-3500 X-TEND ® Day Cab Tracker Bar Extension for 3/4" diameter tracker bars PH 17-3501 X-TEND ® Day Cab Tracker Bar Extension for 1" diameter tracker bars ® Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 15Phillips X Tend Tracker Bar Extension New Day Cab MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 X 12070 Burke Street, Santa Fe Springs, CA 90670 PREVENTS SCUFFS AND MARRING ON THE BACK OF THE CAB BY EXTENDING THE CABLES OUT AND AWAY FROM THE BACK OF THE TRACTOR. • Extends the tracker spring kit and cables out an additional 8 inches from the tracker bar • Prevents spiral wrapped assemblies from banging up against the back of the cab and causing damage • Avoid costs to repair damage at the back of the cab and increase the tractor’s resale value • Easy to Install. Snaps on. No Hardware! • Available for either 3/4” or 1” diameter tracker bars • Stainless steel metal tubing and eye hook • Non-corrosive nylon mounting and support brackets KEEPS CABLES AT ARM’S LENGTH BY PHILLIPS X-TEND ® Can be used on tractors with a solid metal back or windows with a metal frame down the center of the back of the cab. NOT for use with tractors that have solid, one-piece back windows. PH 17-3000 X-TEND ® tracker bar extension, for tracker bars with a 3/4” diameter PH 17-3001 X-TEND ® tracker bar extension, for tracker bars with a 1” diameter Mounting Bracket Extension Bar Eye Hook Back of the support bracket Support Bar Foam Gasket Padding Support Bracket July 22, 2020 (15Phillips X Tend Tracker Bar Extension New Day Cab) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

15QTT Corrosion Prevention CATALOG NUMBER 15 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ TECH Tips Plug Preventive Maintenance to Reduce Corrosion Build Up With the winter months coming soon it’s important to take extra precautions to keep your electrical system running smooth. Many states have increased the usage of Magnesium and Calcium Chlorides as a road de-icier. These chemicals are found to be highly corrosive to brass and copper, which is the base material for the contact pins used in plugs. To keep your products in top condition and to slow the process of corrosion, Phillips recommends the following maintenance tips. Apply dielectric grease to every plug and socket. This will keep moisture out and increase the flow of energy through the connection. Swap plug ends every 6 months to even out plug pin degradation. It is recommended that the 7-way plug interface be cleaned and greased at every preventive maintenance interval. Phillips interval suggestion is 3 months or more often if the vehicle is excessively exposed to magnesium or calcium chloride. • Use dielectric grease on every plug • Change plug ends routinely to even out pin degradation • Clean and grease 7-way plug and socket at every PM interval • Wash electrical cables, plugs and sockets more frequently in winter but never with power wash TIPS Wash electrical cables, plugs and sockets more frequently in winter weather with water. Do not power wash as water can be forced into areas and cannot escape, leading to corrosion. Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 15QTT Corrosion Prevention MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 December 27, 2018 (15QTT Corrosion Prevention) Gladhands and Corrosion The Gladhand Body Most standard gladhands with aluminum offer no corrosion protection; these gladhands are not suggested for use in highly corrosive environments. Powder Coated gladhands are the next step up for anti-corrosion power, offering substantial corrosion protection. Although they offer great protection, over time the coating will chip away, leaving the area exposed to corrosion. Phillips recommends anodized gladhands to combat corrosion. This is the strongest form of protection for heavy corrosive environments. You can see why in the photo’s below. After 200 hours of testing in 5% Magnesium Chloride & 5% Salt (Road Deicers). Gladhands were severely scored before testing to simulate excessive wear. Note: An important place to watch for corrosion is the interior cavity of the gladhand. If corrosion buildup begins to chip away, it will enter the airline system. Products in the field after several months: Standard - Heavy corrosion on entire body Anodized - minimal corrosion where scored Powder Coated - corrosion has begun where the coating has chipped Anodized - Virtually no corrosion on the body Powder Coated - Minimal corrosion where scored • Standard gladhands made with aluminum offer no protection from corrosion and should not be used in corrosive environments • Corrosive protection coating on powder coated gladhands can chip away, exposing gladhands to quick corrosion damage • Anodized gladhands give the best protection from corrosion damage • Corrosion buildup located within the gladhands interior cavity will eventually chip away and enter the airline system TIPS Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

15Phillips Nylon Cable Wraps Easy to wrap and unwrap combination assemblies Convenient replacement for spiral wrap Protects cables from damage due to harsh weather conditions, chaffing, rubbing and tangling Keeps cables organized NYLON CABLE WRAPS For 3-IN-1 Combination Assemblies PH 5-608 8 Ft. Black Nylon Cable Wrap for 12 Ft. Combination Assemblies PH 5-610 10 Ft. Black Nylon Cable Wrap for 13-15 Ft. Combination Assemblies PH 5-612 12 Ft. Black Nylon Cable Wrap for 15 Ft. Combination Assemblies • Easy to assemble and build custom 3-IN-1 combination assemblies • Easy to unwrap for cable repair/ replacement and DOT inspections • Uses hook-and-loop to securely fasten the wrap together • Simple and convenient alternative replacement for spiral wrap • Made from durable woven nylon for protection against the elements with double stitched ends to prevent fraying • Stainless steel grommets for cable ties for optional security • UV coated for sun protection and water resistant inner lining for winter weather protection Hook-and-Loop Fastener Stainless Steel Grommets Woven Nylon is UV Coated Double Stitched Ends Water Resistant Inner Lining CATALOG NUMBER 15 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 15Phillips Nylon Cable Wraps MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 ABS LECTRAFLEX ™ 1/8, 2/10 & 4/12 ga. (1) QCMS2 ™ and (1) QCP ™ (Quick-Change Plug) PH 30-2155 12’, ABS with (1) QCMS2 ™ and (1) QCP ™ , rubber air lines PH 30-2175 15’, ABS with (1) QCMS2 ™ and (1) QCP ™ , rubber air lines QCP ™ (Quick-Change Plug) PH 30-2154 12’, ABS with QCP ™ , rubber air lines PH 30-2174 15’, ABS with QCP ™ , rubber air lines WEATHER-TITE ™ PERMAPLUGS ™ PH 30-2150 12', ABS with WEATHER-TITE ™ PERMAPLUGS ™ , rubber air lines PH 30-2170 15', ABS with WEATHER-TITE ™ PERMAPLUGS ™ , rubber air lines Zinc Die-Cast Plugs PH 30-2151 12', ABS with zinc die-cast plugs, rubber air lines PH 30-2171 15', ABS with zinc die-cast plugs, rubber air lines 3-IN-1 ELECTRICAL & AIR ASSEMBLIES PLUGS QCMS2 ™ Connects to QCS2 ™ QCP ™ (Quick-Change Plug) WEATHER-TITE ™ PERMAPLUGS ™ Zinc Die-Cast Plugs Electrical • Spring-wrapped compression contact pins • Chemical and abrasion resistant • The QCMS2 ™ has a tight STA-DRY seal that locks out road contaminants, completely stopping the devastating effects of corrosion • QCP ™ cartridge is field replaceable in under two minutes • WEATHER-TITE ™ seal blocks all contaminants from entering the electrical system Rubber Air Lines • Large red and blue handle grips for easy coupling/uncoupling and hose support • Tractor end includes swivel fitting for easy installation • Provides excellent abrasion-resistance and resists cracking, kinking and weathering • Rubber air lines are color coded red and blue to denote emergency and service March 1, 2019 (15Phillips Nylon Cable Wraps) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

15Phillips Air Line Inspection and Replacement Tech Tip TECH Tips CATALOG NUMBER 15 www.midwestwheel.com Order NLINE ™ www.midwestwheel.com Order NLINE ™ AIR LINE INSPECTION & REPLACEMENT In preparation for the winter months ahead, air lines should be inspected for damage to avoid air line failure on the road. However, component replacement is not only for the winter months, it can apply all year round. Although not always necessary, it’s a good practice to replace air lines, and air line accessories, annually to ensure proper working order. However, during routine PMs, or during pre-trip inspections, if any of the following are noted, air lines should be replaced much sooner to avoid possible air line failures, leading to downtime, or CSA violations. • Chaffing or damaged jacketing • Rusted springs and/or fittings • Nylon cables that are stretched out and no longer recoil • Kinked nylon cables When selecting airlines for a tractor/trailer most know that it is recommended, and in some cases even required by law, to choose air lines with the following features: • Air line assemblies that display the appropriate markings which signify compliance with DOT regulations (Required by law) • Swivel fittings on the tractor end to avoid corkscrewing during installation • Spring guards; to protect the hose or tubing from a sharp bend at or near the fitting (Required by law) • Added handle grips at the trailer end to provide protection from kinking of air lines during gladhand connection and disconnection • Coiled assemblies that extend to their maximum expected service length and return to their retracted position without sag • Proper overall working length for the tractor-trailer application • If operating in harsh environments, use cables rated for extreme temperatures [Lower than the typical standard of -40°F (-40°C)] When installing new air lines its always important to remember the following: • If cables or handles are color coded, be sure to install/couple them with their correlating connections (red to red, blue to blue). • Always remove the old fitting from the tractor protection valve and install the new fitting attached to the new air lines. Damaged Jacketing, Rusted Springs • Air lines should be inspected regularly. It is suggested to replace them annually or upon discovery of damage to the air lines. • If cables or handles are color coded, be sure to install/couple them with their correlating connections (red to red, blue to blue). • Always remove the old fitting from the tractor protection valve and install the new fitting attached to the new air lines. TIPS Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 15Phillips Air Line Inspection and Replacement Tech Tip MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 September 30, 2019 (15Phillips Air Line Inspection and Replacement Tech Tip) AIR ASSEMBLIES Coiled Air 12’ Working Length* PH 11-712 Pair (red & blue) 15’ Working Length* PH 11-715 Pair (red & blue) PH 11-717 Red (emergency) coil only PH 11-718 Blue (service) coil only Heavy Duty Coiled Air with Gladhands PH 11-3159 15’ Pair (red and blue), with 2 gladhands Rubber Air (Straights) PH 11-81120 12’ set PH 11-81150 15’ set PH 11-81200 20’ set Polar Air (coils) PH 11-5120 12’ set PH 11-5150 15’ set PH 11-5400 15’ set w/ 40” lead Power Grip PH 11-3150 15' Pair (red and blue) PH 11-3170 15' Red (emergency) coil only PH 11-3180 15' Blue (service) coil only PH 11-3400 15' Pair (red and blue), with 40" lead (Note: singles and universal (black) grips available) 2 Year Warranty | Stays flexible at -85˚ F! Heavy Duty Coiled Air 15’ Working Length* PH 11-315 Pair (red & blue) PH 11-317 Red (emergency) coil only PH 11-318 Blue (service) coil only Red & blue rubber lines, with red & blue grips GOOD BEST BETTER *Coiled air hoses contain substantially more hose than stated working length. 5th Wheel Slider Air Coil PH 11-302 60” Air Coil Spiral Wrap Sold Per Foot P/N Description PH 5-534 1" I.D. PH 5-536 1 3/8" I.D. Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

06Kit Masters PolyForce Belt Tensioners K5 689448 OEM # 38610, 49582, 89448, 3104149, 3682683, D1186-2633, 38567, 3690067 K5 689440 Mfg. # Peterbilt: 3682946 Kenworth: 3682946 Mack: 3682946 Cross Ref. # 89440, 49563 K5 689477 Mfg. # Volvo: 21568413, 21454379 Cross Ref. # 89477, 49601 K5 689419 Mfg. # Freightliner: 01-27245-000 Cross Ref. # 89419 No Springs Attached Conventional belt tensioners use springs to hold their position and tension. However, springs can only flex so many times before they fail. PolyForce Belt Tensioners replace this spring with a New and unique Polymer Torsion Core A longer lasting compressed polymer replaces the spring, thereby eliminating the primary cause of failure. The Polymer Torsion Core also doubles as a built-in damper, reducing stress on adjacent accessories without additional damage to the belt tensioner. TENSIONERS REINVENTED! P/N K5 638667 Replaces OEM #s: 38667, 49603, 89498, 89498A, A4-72200-0170, A4-72200-0270 , A4-72200-0470, A4-72200-0570 , A4-72200-0970 THE MOST POPULAR BELT TENSIONER ON 08-17 FREIGHTLINERS WITH DD13, DD15 & DD16 ENGINES Improved Bearings Pulley bearing absorbs a huge amount of vibration and can often fail too soon. To extend bearing life, PolyForce tensioners feature heavy-duty bearing that have a 40% higher load rating than the OEM and feature Anti-Vibration Grease, which won’t separate. Standard PolyForce PULLEY PolyForce pivot bushings OEM pivot bushings Misaligned Alignment - Wider is Better Misaligned belt tensioners lead to damaged tensioners, belts & accessories. A worn pivot bushing is typically the culprit of misalignment. PolyForce pivot bushings have a much wider stance, giving them drastically increased stability. 2 Year / 200,000 Mile WARRANTY CATALOG NUMBER 06 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ Long-Term Savings • Long-lasting components • Reduced belt & accessory wear • Replace individual tensioners instead of entire unit Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 06Kit Masters PolyForce Belt Tensioners MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 November 5, 2021 (06Kit Masters PolyForce Belt Tensioners) What you need, when you need it Kit Masters has developed a modular belt tensioner system that allows you to stock a small number of components while maintaining maximum market coverage. With a minimal investment and a very simple assembly of just three modular components, you can stock nearly every heavy duty tensioner in this small, portable toolbox kit. The PolyForce Belt Tensioner Kit contains everything you need to identify and assemble a brand new belt tensioner in a matter of minutes! INCLUDED IN THE MOBILE REPAIR KIT: 825 1st St. NE, Perham, MN • 800-810-9110 • www.kitmasters.com Hundreds of Belt Tensioners in this toolbox! Arms (x5) Pulleys (x6) Housings (x14) 2 Year / 200,000 Mile WARRANTY P/N K5 TB-001 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

38Monroe Magnum Shock Applications CATALOG NUMBER 38 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Monroe Magnum Shock Applications COMMITMENT TO QUALITY Replacing worn shocks with Monroe ® Magnum ™ shock absorbers can help reduce excessive vibration, resulting in longer tire life, less downtime and a lower cost per mile MONROE ® MAGNUM ™ SHOCK ABSORBERS ARE BUILT FOR DURABILITY, VEHICLE STABILITY AND DRIVER COMFORT FEATURING A NITROGEN GAS CHARGE TO REDUCE AERATION, IMPROVING VEHICLE CONTROL AND PERFORMANCE Large diameter nitrocarburized rod provides better compression control and side-load strength Thicker pressure tube provides the ability to handle more severe road condition Shouldered bushing and bonded bushing with sleeve designs prevent bushing walkout for improved quality and durability Large 1.75” bore size gives accessibility to finer tune the valving by allowing more hydraulic fluid to dissipate heat for better vehicle control Sintered steel piston design for more precise dimensions, requiring no additional components, for improved durability and an exceptional fit Robust hydraulic lock-out design to prevent over- extension of the suspension, top-out of the piston and averts damage to the seal assembly PTFE coated bushing to reduces friction during operation between the rod and rod guide, improving durability Monroe Part OE Part % of Sales L12 Mths % Sales Cumm Brand Description 65490 680339, 1613952000, 1613957000, 1613957003, 1616591000, 1620716000 35.77% 36% MAGNUM SHOCK 65148 101380900, 1012396000, 1013634000, 1013684000, 1013809000 19.32% 55% MAGNUM SHOCK 65103 1012030002, 1012032000, 1012032001, 1012032002, 1012032003, 1012032004, 1012046000 5.01% 60% MAGNUM SHOCK 66118 1830378, 1830378000, 1832999000, 1860295000 3.18% 63% MAGNUM CAB SHOCK 66893 1614759000 2.93% 66% MAGNUM SHOCK 66122 1832999001, 1841762002, 1860764000, 1860695000, 814903003528 2.01% 68% MAGNUM CAB SHOCK 65492 3688615C1 1.44% 70% MAGNUM SHOCK 65528 C711011 1.30% 71% MAGNUM SHOCK 65416 1614759000 1.27% 72% MAGNUM SHOCK 65495 C711002 1.21% 73% MAGNUM SHOCK 66147 1829846000, 1829846001 1.10% 75% MAGNUM CAB SHOCK 65405 AMS650405 1.08% 76% MAGNUM SHOCK 65140 61300224 1.00% 77% MAGNUM SHOCK 65419 90044162 1.00% 78% MAGNUM SHOCK 66608 90044162 0.99% 79% MAGNUM SHOCK 65101 665659 0.92% 80% MAGNUM SHOCK 65408 1613947000 0.62% 80% MAGNUM SHOCK 65435 1012542000 0.62% 81% MAGNUM SHOCK 65489 1614259000, 1615675000, 1616577000, 1616827000 0.61% 81% MAGNUM SHOCK 65102 B711002 0.56% 82% MAGNUM SHOCK FREIGHTLINER P/N OE Part Description MO 65490 680339, 1613952000, 1613957000, 1613957003, 1616591000, 1620716000 MAGNUM SHOCK MO 65148 101380900, 1012396000, 1013634000, 1013684000, 1013809000 MAGNUM SHOCK MO 65103 1012030002, 1012032000, 1012032001, 1012032002, 1012032003, 1012032004, 1012046000 MAGNUM SHOCK MO 66118 830378, 1830378000, 18329990 0, 1860295000 AGNUM CAB SHOCK MO 66893 1614759000 MAGNUM SHOCK MO 66122 832999001, 1841762002, 1860764000, 1860695000, 814903003528 MAGNUM CAB SHOCK MO 65492 3688615C1 MAGNUM SHOCK MO 65528 C711011 MAGNUM SHOCK MO 65416 1614759000 MAGNUM SHOCK MO 65495 C711002 MAGNUM SHOCK MO 66147 1829846000, 1829846001 MAGNUM CAB SHOCK MO 65405 AMS650405 MAGNUM SHOCK MO 65140 61300224 MAGNUM SHOCK MO 65419 90044162 MAGNUM SHOCK MO 66608 90044162 MAGNUM SHOCK MO 65101 665659 MAGNUM SHOCK MO 65408 1613947000 MAGNUM SHOCK MO 65435 1012542000 MAGNUM SHOCK MO 65489 1614259000, 1615675000, 1616577000, 1616827000 MAGNUM SHOCK MO 65102 B711002 MAGNUM SHOCK PTFE coated bushing to reduces friction during operation between the rod and rod guide, improving durability Shouldered bushing and bonded bushing with sleeve designs prevent bushing walkout for improved quality and durability Large diameter nitrocarburized rod provides better compression control and side-load strength Sintered steel piston design for more precise dimensions, requiring no additional components, for improved durability and an exceptional fit Large 1.75” bore size gives accessibility to finer tune the valving by allowing more hydraulic fluid to dissipate heat for better vehicle control Robust hydraulic lock-out design to prevent overextension of the suspension, top-out of the piston and averts damage to the seal assembly Thicker pressure tube provides the ability to handle more severe road condition Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Monroe Magnum Shock Applications INTERNATIONAL NAVISTAR P/N OE Part Description MO 65492 3549099C2, 3680395C1, 3688614C1, 3688615C1, 3688616C1, 3688617C1, 3688729C1, 3688731C1, 3688732C1, 3688733C1, 3737576C1, 3821759C1, 3821760C1, 3620395C1, 4050340C1, 4050340C2, 3620395C2, MAGNUM SHOCK MO 65409 600101, 2018987C2, 3892445C1, AMS600101, AMS650409, 1690035C1, 2018987C1, 501553C91, 1675455C1 MAGNUM SHOCK MO 66893 AMS600104, AMS650416, AMS660104 MAGNUM SHOCK MO 65158 3581109C3, 3581109C4, 3606857C1, 3606857C2, 3668566C1, 3674348C1, 3737575C1, 3810584C1, 4050443C2, 3606857C3, 3606859C3 MAGNUM SHOCK MO 65143 3533356C1, 3584116C2, 3902993C1, 3533356C2, 6127088C1, 3578105C1, 3578105C2, 3584116C1 MAGNUM SHOCK MO 65490 680339, 1613952000, 1613957000, 1613957003, 1616591000, 1620716000, 700423MT, 57374425, 1615817000 MAGNUM SHOCK MO 65147 3581106C1, 3581106C2, 3581106C3, 3581106C4 MAGNUM SHOCK MO 65144 3533357C1, 3576465C1, 3584118C1, 3588209C1, 3602060C1, 3576465C2 MAGNUM SHOCK MO 65107 70334, 2033533C1, 2200327C1 MAGNUM SHOCK MO 65416 AMS600104, AMS650416, AMS660104 MAGNUM SHOCK MO 66923 3000070C91, 472411C91, 472412C91, 586724C91, AMS600112, AMS660112 MAGNUM SHOCK MO 66924 3000098C91, 3609400C1, 3609400C2, 501906C92, 506905C91, AMS600129, AMS660129 MAGNUM SHOCK MO 65488 3544768C1, 3544768C2, 3549100C1, 3578858C1, 3578858C2, 3596107C1, 3892458C1, 3892458C2, 6578858C1 MAGNUM SHOCK MO 66628 AMS660189 MAGNUM SHOCK MO 66605 2504419C1, 540395C92, AMS600164 MAGNUM SHOCK MO 65148 3564158C1 MAGNUM SHOCK MO 66608 S24088, B24088, 520001, A20001, B23361, B26652, S23361, S26652, S20001, 600167, 600167MT, 3919570, 90044162 MAGNUM SHOCK MO 65482 579052, 598512, 606754, 4790225, B25437, S2471, S25437 MAGNUM SHOCK MO 65419 AMS650419 MAGNUM SHOCK MO 65157 3606859C1, 3606859C2, 3737571C1, 3737574C1 MAGNUM SHOCK MACK P/N OE Part Description MO 65490 700423MT MAGNUM SHOCK MO 65148 101380900, 1012396000, 1013634000, 1013684000, 1013809000 MAGNUM SHOCK MO 65411 650411, 5625151, 256255151, 14CK366P1, 14QK2100P6, 14QK366, 14QK366P1, 14QK366P2, 14QK366P3, 14QK393AM, 650411MT MAGNUM SHOCK MO 65486 20897198, 21462378, 21462382, 21462384, 22202559, 471700006038, 471700006039, 471700006040, 14QK2136M, 14QK3101M, 22202560 MAGNUM SHOCK MO 65159 6658587C1, 665858 MAGNUM SHOCK MO 65505 20570098 MAGNUM SHOCK MO 65494 20973993, 21436096, 25633133, 14QK3107M, 14QK3114M, 14QK431M MAGNUM SHOCK MO 65528 C711011, C711017, C711017PLUS, C711011 MAGNUM SHOCK MO 66608 600167, 600167MT MAGNUM SHOCK MO 65492 3549099C2, 3680395C1, 3688614C1, 3688615C1, 3688616C1, 3688617C1, 3688729C1, 3688731C1, 3688732C1, 3688733C1, 3737576C1, 3821759C1, 3821760C1, 3620395C1, 4050340C1, 4050340C2, 3620395C2 MAGNUM SHOCK MO 65495 C711002, C716015, C711016, C711016PLUS MAGNUM SHOCK MO 66502 632155, A14496, S14496 MAGNUM SHOCK MO 65158 3581109C3, 3581109C4, 3606857C1, 3606857C2, 3668566C1, 3674348C1, 3737575C1, 3810584C1, 4050443C2, 3606857C3, 3606859C3 MAGNUM SHOCK MO 65524 671962, C711014 MAGNUM SHOCK MO 66189 25624698, 25624837, 14QK391AM, 14QK391AM2, 14QK391BM, 14QK391BM2, 12110008 MAGNUM CAB SHOCK MO 66884 25625234, 14QK410M, 600114MT MAGNUM SHOCK MO 65101 650101, 650101MT, 700111MT MAGNUM SHOCK MO 66893 25621810, 14QK2108, 600104MT, 650416MT, 660104MT MAGNUM SHOCK MO 65415 3541456C1, 3576464C1, 3596878C2, 3606770C1, 3606770C2 MAGNUM SHOCK MO 65110 650110, 25624730, 25624947, 25631285, 14QK392AM, 14QK392AM3, 14QK392BM, 14QK396, 14QK396M, 650110MT, 14QK392BM3 MAGNUM SHOCK Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Monroe Magnum Shock Applications MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 September 30, 2019 (38Monroe Magnum Shock Applications) VOLVO P/N OE Part Description MO 65486 8086651, 20551627, 20551628, 21462380, 22202559, 471700006038, 471700006039, 471700006040 MAGNUM SHOCK MO 65407 630995 MAGNUM SHOCK MO 65494 8078195, 20433423, 20433424, 20433428, 20513881, 21436086, 21436096 MAGNUM SHOCK MO 66893 3919913, 3919959 MAGNUM SHOCK MO 65495 C711002, C716015, C711016, C711016PLUS MAGNUM SHOCK MO 66884 3919917, 25625234, 14QK410M, 600114MT, 600114MT, 660114MT MAGNUM SHOCK MO 65416 3919913, 3919959 MAGNUM SHOCK MO 65490 700423MT MAGNUM SHOCK MO 66608 3919570 MAGNUM SHOCK MO 65415 3919958 MAGNUM SHOCK MO 65110 3919940 MAGNUM SHOCK MO 65102 3919933 MAGNUM SHOCK MO 65497 20485632, 20485633, 64838001L MAGNUM SHOCK MO 65159 6658587C1, 665858 MAGNUM SHOCK MO 65419 3919570 MAGNUM SHOCK MO 66502 632155, A14496, S14496, 6608, 66502, 70107101, 9004162, 11418, 632155 MAGNUM SHOCK MO 555002 18864 MAGNUM RV SHOCK MO 66636 3919915 MAGNUM SHOCK MO 65468 8220648050, 8220648060, 8220648070, 665844, 0308781, C716005, C716005PLUS MAGNUM SHOCK MO 65505 609981, 60998001, 471700131545, 2030996C1, 20570098, 665784 MAGNUM SHOCK PACCAR KENWORTH PETERBILT P/N OE Part Description MO 65495 C711002, C716015, C711016, C711016PLUS MAGNUM SHOCK MO 65405 B711009PLUS, 665928, 0202727, 0202737, B716009, B716009PLUS MAGNUM SHOCK MO 65159 665858 MAGNUM SHOCK MO 65102 B711002, 680339 MAGNUM SHOCK MO 65468 665844, 0308781, C716005, C716005PLUS MAGNUM SHOCK MO 65101 B716007, B716007PLUS, 665932, 2312262, 0201787, 0202225, 0202742, 0204010, B716007 MAGNUM SHOCK MO 65528 C711011, C711017, C711017PLUS MAGNUM SHOCK MO 66893 524125, A14583, A1667, A1668, A20002, A20889, A21553, B21832, B23013, B23566, B24023, B24125, B24577, S1667, S20002, S20889, S23013, S23566, S24023, S24125, S24577 MAGNUM SHOCK MO 65416 UCD6216001, UCD62161, 524125, A14583, A1667, A1668, A20002, A20889, A21553, B21832, B23013, B24023, B24125, B24577, S1667, S20002, S20889, S23013, S24023, S24125, S24577 MAGNUM SHOCK MO 65402 47878, 680241, 0202769 MAGNUM SHOCK MO 66145 B716007, B716007PLUS, 2902455, B716007, B716007PLUS MAGNUM CAB SHOCK MO 65490 680339, 1613952000, 1613957000, 1613957003, 1616591000, 1620716000 MAGNUM SHOCK MO 65404 665902, 665906, K37432, 680239, 0304628 MAGNUM SHOCK MO 65524 671962, C711014 MAGNUM SHOCK MO 65444 680586, 680586, 0307421 MAGNUM SHOCK MO 65523 671656, 671963, C711015, C711013 MAGNUM SHOCK MO 65436 70701, 665903, 665918, 665944PLUS MAGNUM SHOCK MO 65400 0306085PLUS, 665633, 0306084 MAGNUM SHOCK MO 65504 606573, 606574, 606577, 60657003, 60657004, 60657005, 60657007 MAGNUM SHOCK MO 65175 B716019, B716019, B716019 MAGNUM SHOCK Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

38Automann Suspension Catalog SUSPENSION SYSTEMS FREIGHTLINER • INTERNATIONAL NAVISTAR • KENWORTH • MACK • PETERBILT • VOLVO / WHITE Suspension Catalog Offerings AUTOCAR 03-01 BINKLEY 04-01 BLUE BIRD BUS 05-01 CHALMERS 06-01 CHEVROLET 07-01 FREIGHTLINER 16-01 Front Suspension Assemblies 3-1/2" Wide (Conv. & C.O.E.) Before Early ‘70s 16-04 4.0" Wd.; FLA, FLB, FLL, FLT (COE & LCF); FLC120 (Conv.); FLD & Classic w/ 54" Spg. (Conv.) 16-06 Freightliner: FC, FL, FL112, FLD (w/ 56” Spg.), MB, M2BC, MT55, Columbia, Coronando, Cascadia (Conv.); Arogosy (C.O.E.) Sterling: Acterra, A, L, S Series (Conv.); Condor (LCF); & Cargo (C.O.E.) 16-12 FLC112 16-16 Rear Suspension Assemblies FAS AIRLINER I 16-24 FAS AIRLINER II 16-26 TufTrac ® 40K, 46K and 52K 16-40 FRUEHAUF 17-01 HENDRICKSON HENDRICKSON TURNER HINO 21-01 HUTCH 22-01 INTERNATIONAL NAVISTAR 23-01 Front Suspension Assemblies 25-2600, 81-8300, 91-9900 4" Wd. w/ TB’s & Embossed Pin 23-20 Multilink Air ® 23-34 Rear Suspension Assemblies Corporate 3-1/2" Single & Tandem Axles 23-42 New Corporate Air IROS ® ’02-’10 23-46 Z 3-1/2" - Air Spring ’78-’01 23-52 Automann Catalog Page # See Midwest Wheel’s Hendrickson Catalog for Genuine Hendrickson Parts Contact your salesman if you do not see the part you are looking for on the following pages. Please refer new part numbers for stock consideration to your salesman. MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 August 2019 (38Automann Suspension Catalog) CATALOG NUMBER 38 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 2 KENWORTH 26-01 Front Suspension Assemblies C500B/550B, K100/300, T300/400/450/600/800/2000, W900B, L & S 26-04 Rear Suspension Assemblies AG100 Airglide ® 26-08 AG200/230/400/460 Airglide ® 26-10 AG380 Airglide ® (Similar to Peterbilt Flex Air) 26-14 MACK 27-01 Front Suspension Assemblies CH, CL, CX, RB, -- 3-1/2" Wd. 27-08 CHN, CHU (Pinnacle) w/ RB’s & CT w/ S.B.A., CTP, GU (Granite), TD (Titan) w/ MTB’s 52-1/2" ’04-’10, CXN (Vision) ’04-’07 & CXP, CXU (Pinnacle) ’07-’10 w/ MTB’s 59.0" 27-10 Rear Suspension Assemblies SS34-38 Camelback, w/ Split Trunnions (34 & 38K) 27-22 SS44, SWS573 Camelback 3-1/2" Bar 4.0" Spg. (44K) 27-24 SS50 Camelback 4.0" Bar x 4.0" Spg. (46K) 27-26 SW, SWW Walking Beam 27-34 MERITOR 29-01 NEWAY / HOLLAND 31-01 PETERBILT 35-01 Front Suspension Assemblies 4" COE & Conventional, ’82-Present 35-04 Rear Suspension Assemblies Air Leaf ® 35-10 Low Mount Air Leaf ® 35-12 Air Trac ® 35-16 Flex Air ® 35-18 REYCO / TRANSPRO 36-01 RIDEWELL 37-01 SPRINTER 38-01 VOLVO / WHITE 42-01 Front Suspension Assemblies VHD, VM, VN, VT Spring 42-10 WA, WC, WG, WI, WH, WS, WX 42-12 Rear Suspension Assemblies B, T-Ride Tandem (Mack M-RIde) 42-14 Corporate Air Ride, (Mack Maxlite 40 ’04-’06), Single or Tandem 42-18 VN & VT Rear Spring, (Mack Maxlite 40EZ ’06 & Up) 42-30 WATSON & CHALIN 43-01 WESTERN STAR 44-01 Suspension Catalog Offerings, Continued Automann Catalog Page # Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 3 Key Part Number OEM Ref. Req. Description 1 AUTM1832 6813251201 / 1614031003 2 Hanger, 35mm Flange Thickness, Ductile Iron 2 AUTAUBK8866-144 1123853000 2 U-bolt Kit, 7/8” x 5-1/4” Special, 14-1/2” Long AUTAUBK8866-154 6813250325 2 U-bolt Kit, 7/8” x 5-1/4” Special, 15-1/2” Long AUTAUBK8175-18 1123854000 2 U-bolt Kit 1” x 5” Rd. x 18” Lg., Usually 23/46K 3 AUTMFL104 6813252109 2 LF Wear Pad For Hanger, Use w/AUTMR656 & AUTMR714 AUTMFL174 1616456000 2 LF Wear Pad For Hanger, Use w/AUTMR782 & AUTMR783 4 AUTMFL106 6813252209 2 RF Wear Pad For Hanger, Use w/AUTMR656 & AUTMR714 AUTMFL176 1616456001 2 RF Wear Pad For Hanger, Use w/AUTMR782 & AUTMR783 5 AUTMR782 1616412001 / 1618035000 2 Anti-Walk Bushing AUTMR783 070480054000 2 Anti-Walk Bushing, Oversized Version of AUTMR782 AUTMR656 6813250150 2 Bushing, 2-1/2” Od. x 7-1/2” Oal., Poly AUTMR656UB AUTMR714 1613962000 2 Bushing, High Confinement, Repls. AUTMR656 6 AUTTMR514 6813266716 1 Rigid T/Rod 24” Tubular AUTTMR514F 1616749001 1 Rigid T/Rod 24” Forged AUTTMR515 6813266316 / 1616749000 1 Rigid T/Rod 23” Tubular AUTTMR534 1618972001 / 1615632001 1 Rigid T/Rod 23-13/16” Forged, Non-Rebushable AUTTMR535 1616749002 1 Rigid T/Rod 24-3/8” Forged, Non-Rebushable 7 AUTTRB6185 A16119448000 2 Bushing AUTTRB6185 2 Poly Bushing 8 AUT171.H00450CE H00450CA 1 Height Control Valve 9 AUTMSRK582 HPB4503 1 Linkage Kit 3-5/8” to 19-5/8” 10 EU M85724 or MO 65490 1615817000 / 1618708000 / 61310434 / 61310478 / XC4518080BA 2 Shock, Eye/Eye 11 MO 65408 1613947000 / 6813250400 2 Shock, Stud/Eye 12 AUTMHS68 Torque Arm Shim 4.375” CtoC, 0.063” Thick 13 AUTMFL114 6813281384 AR Shim, 1-1/8” Thk. AUTMFL112 6813282184 AR Shim, 1-1/16” Thk. AUTMFL154 6813282284 AR Shim, 1-1/32” Thk. FREIGHTLINER Rear: FAS Airliner II (Freightliner & Sterling) (5) AUTMR782 AUTMR783 AUTMR656 AUTMR714 (9) AUTMSRK582 (8) AUT171.H00450CE (1) AUTM1832 (7) AUTTRB6185 AUTTRB6185 (10) EU M85724 or MO 65490 (12) AUTMHS68 (11) MO 65408 (6) AUTTMR514 AUTTMR514F AUTTMR515 AUTTMR534 AUTTMR535 (13) AUTMFL114 AUTMFL112 AUTMFL154 (3) AUTMFL104 AUTMFL174 (4) AUTMFL106 AUTMFL176 SPRING CHART 18-20K 2 Leaf Hockey After 1995 (2nd Design) AUT46-1307 AUTMR782 Bushing (LH) AUT46-1309 AUTMR782 Bushing (RH) Mono Leaf Hockey After 1998 (3rd Design) AUT46-1345 AUTMR782 Bushing (LH) AUT46-1347 AUTMR782 Bushing (RH) (2) AUTAUBK8866-144 (special) AUTAUBK8866-154 (special) AUTAUBK8175-18 (round) Air Spring P/N OEM Ref. CAS64266 (2 required) 6813200017 (Aluminum) A1614004000 (Aluminum) 1616773000 (Steel) 16163810000 (Plastic) 161384000 (Plastic) Firestone W01 358 9781 CAS65361 (2 required) 1614263000 / 1615443000 / 1618333000 / 1614263001 / 1615443001 Firestone W01 358 9634 AR = As Required Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 4 Key Part Number OEM Ref. Req. Description 3 AUTM5358 1613470000 / 1613078000 6 Spring Pin, 4.0” Spg., 1-1/4” Od. x 6-7/8” Lg. x 5-3/8” CtoC, Use w/4.0” Spg Eye w/ AUTOGB-RNK or AUTMBTNK’s, Can Use AUTM5344 AUTM5284 1612373000 6 Spring Pin, 4.0” Spg., 1-1/4” Od. x 6-7/8” Lg. x 5-3/8” CtoC, Use w/4.0” Spg Eye w/ AUTOGB-RNK or AUTMBTNK’s 4 AUTOGB-RNK AR Bushing, 1-1/4” Id. x 1-1/2” Od. x 4.0” Lg., Spg Eye Only 5 AUTMFL80 2309860012 AR Shim, 1-7/8” Od. x 1/32” Tk. x 1-1/4” Hole 6 AUTMFL82 2311656018 AR Shim, 2-1/4” Od. x 5/32” Tk. x 1-1/4” Hole 7 AUTMWW14 1609040002 AR Shim, 1-3/8” Id. x .046” Tk. 8 AUTM1926 1612355000 / 1612297000 2 Shackle Hanger, Aluminum, w/AUTMBTNK AUTM1482 1612358000 / 1612357000 2 Shackle Hanger, Ductile Iron, w/AUTMBTNK 9 AUTMBTNK 2 Bushing, 1-1/4” Id. x 1-5/8” Od. x 4.0” Lg., Hanger Eye Only, Verify 10 AUTM1306 1611890000 4 Side Bar, 7-3/4” Lg. x 5-5/16” CtoC x 1.0” Tk., 1-1/4” Pin, Use w/4.0” Spgs. AUTM1836 1613333000 4 Side Bar, 6-3/4” Lg. x 4-5/16” CtoC x 1.0” Tk., 1-1/4” Pin 11 AUTF120300GR5 2309441300 8 Bolt 1/2”-20 x 3.0” Lg. 11a AUTLN102 8 Lock nuts for the AUTF120300GR5 12 AUTMFL4668 2 Shackle Kit w/2-AUTM1306, 2-AUTM5284, 1-AUTMBTNK, 1-AUTOGB-RNK & Hrdw. AUTMFL1836K 2 Shackle Kit w/2-AUTM1836, 2-AUTM5284, 1-AUTOGB-RNK, 1-AUTMBTNK & Hrdw. 13 AUTMFL1926K 2 Shackle & Hanger Kit, w/1-AUTM1926, 2-AUTM1306A, 2-AUTM5284, 4-AUTMFL82, 1-AUTOBG-RNK & Hrdw. AUTMFL1482K 2 Shackle & Hanger Kit, w/1-AUTM1482, 2-AUTM1306, 2-AUTM5284, 4-AUTMFL82, 1-AUTOBG-RNK & Hrdw. 15 AUTM5286 1612302000 6 Threaded Spring Pin, 1-1/4”-7 x 7.14.0” Lg. x 5-3/8” CtoC, Use w/AUTMTB170 & AUTMFL84 17 AUTMTB170 1612301000 6 Threaded Bushing, 1-1/2” Od. x 4.0” Lg. x 1-1/4”-7 Thrd. 18 AUTMR772 1617770000 / 1614603000 2 Bushing, 2-1/2” Od. x 4.0” Lg., 5-5/8” CtoC, Embossed Pin Type 21 AUTMR712 6803220150 / 1617769000 AR Bushing, 20mm Id. x 2-1/4” Od. X 4.0” Lg. 23 AUTM1880 6803220020 4 Side Bar 2-3/4” Id. Holes, 4-1/8” CtoC 29 MO 65103 1012032004 2 Shock, Verify w/Shock Catalog, Can Use A89429, EB3/EB3 MO 65116 2 Shock, Verify w/Shock Catalog, Can Use A89422, EB3/EB3 FREIGHTLINER Front: 4.0” Wd.; FLA, FLB, FLL, FLT (COE & LCF); FLC120 (Conv.); FLD & Classic w/54” Spg. (Conv.) AR = As Required Alternate Threaded Pin (15) AUTM5286 (10) AUTM1306 AUTM1836 (10) AUTM1306 AUTM1836 (10) AUTM1306 AUTM1836 (10) AUTM1306 AUTM1836 (17) AUTMTB170 (5) AUTMFL80 (6) AUTMFL82 (6) AUTMFL82 (23) AUTM1880 (21) AUTMR712 (23) AUTM1880 (18) AUTMR772 (21) AUTMR712 (17) AUTMTB170 (15) AUTM5286 (29) MO 65103 MO 65116 (4) AUTOGB-RNK (3) AUTM5358 AUTM5284 (13) AUTMFL1926K AUTMFL1482K (8) AUTM1926 AUTM1482 (7) AUTMWW14 (3) AUTM5358 AUTM5284 (4) AUTOGB-RNK (9) AUTMBTNK (5) AUTMFL80 (6) AUTMFL82 (5) AUTMFL80 (6) AUTMFL82 w/ AUTMR712’ s AUT46-1406 SPRING CHART Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! AUTG1803 AUTG1803 (12) AUTMFL4668 AUTMFL1836K (11) F120300GR5 (11) F120300GR5 (11) (11) (11a) (11a) (11a) (11a) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 5 FREIGHTLINER / STERLING Front: Freightliner FC, FL, FL112, FLD (w/56” Spg.), MB, M2BC, MT55, Century, Columbia, Coronando, Cascadia (Conv.); Arogosy (C.O.E.); Condor (LCF). Sterling Acterra, A, L, S Series (Conv.); Condor (LCF); Cargo (C.O.E.) Key Part Number OEM Ref. Req. Description 1 AUTM1723 A1614307000 / 6803200970 2 Front Hanger, w/12K Axle, Verify (Add’l OEM 6803200777) 5 AUTM17332 1615215000 2 Rebound Bumper, 4.0” Spg. Use w/AUTMFL46214 & AUTMFL46213 6 AUTM1483 A1614019002 2 Shackle Hanger, Older, 4.0” Wd. Spg., w/AUTMR668 8a AUTM1306 1611890000 4 Side Bar, 7-3/4” Lg. x 5-5/16” CtoC x 1.0” Tk., 1-1/4” Holes 10 AUTMPB60 1612399001 AR Bushing, 1-1/4” Id. x 1-1/2” Od. x 4.0” Lg. 11 AUTM5284 1612373000 Spring Pin, 1-1/4” Od. x 6-31/32” Lg. x 5-3/8” CtoC 13 AUTMFL4888 2 Shackle Kit 6 to 9K Axles, w/2-AUTM1880s, 2-AUTMR670s, 2-AUTM5164s & Hdw. AUTMFL4878 2 12K Axles, w/2-AUTM1880s, 2-AUTMR668s, 2-AUTM4922s & Hdw. AUTMFL4879 2 12K Axles, w/2-AUTM1881s, 2-AUTMR668s, 2-AUTM5332s & Hdw. 14 AUTMR668 6803220301 / 6803220150 / 1617769000 / 1615951000 6 Bushing, 20mm Id. x 57mm Od. x 108mm Lg., 12K Axles, Replaces AUTMR712, 4.0” Spg 17 AUTMR772 1617770000 / 1614603000 6 Bushing & Pin, (Add’l OEM #’s 161794000 / 1618023000) 23 MO 65482 6803230300 2 Shock, Verify w/Shock Catalog, AUTA89401, FLN FC70/80 11K-12K, ES36/ES36 MO 74028 2 Shock, Verify w/Shock Catalog, AUTA89420, EB3/EB3 25 AUTM5286 1612302000 AR Threaded Pin, 5-3/8” CtoC 1-1/4” - 7 TPI AR = As Required (23) MO 65482 MO 74028 (1) AUTM1723 (5) AUTM17332 (17) AUTMR772 (25) AUTM5286 Alternate Threaded Pin (8a) AUTM1306 (8a) AUTM1306 (8a) AUTM1306 (8a) AUTM1306b (10) AUTMPB60 (11) AUTM5284 (13) AUTMFL4888 AUTMFL4878 AUTMFL4879 (14) AUTMR668 (6) AUTM1483 w/ AUTMR668 ’s (AUTRB211’ s or AUTRB233’ s) AUT46-1432 AUT46-1302 w/ AUTMR772 ’s & AUTMR668’ s AUT46-1434 SPRING CHART Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 6 FREIGHTLINER Front: FLC112 (Conv.) Key Part Number OEM Ref. Req. Description 3 AUTM1697 6813200470 2 Shackle Hanger, 4 Bolt, Cast# 6813220703, 4 Frame Bolts, 1-1/4” Pin 4 AUTM1699 6813201570 2 Shackle Hanger, 6 Bolt, Cast# 6813220703, 6 Frame Bolts, 1-1/4” Pin 5 AUTM1678 6813220020 / 6813220120 4 Side Bar, 6-11/16” Lg. x 4-1/8” CtoC x 1.0” Tk., 1-1/8” Pin Holes, Use w/AUTM5328 Pins AUTM1836 6813220220 / 6813220320 4 Side Bar, 6-3/4” Lg. x 4-5/16” CtoC x 1.0” Tk., 1-1/4” Pin Holes, Use w/AUTM5284, AUTM5286 Pins AUTM1306 1611890000 4 Side Bar, 7-3/4” Lg. x 5-5/16” CtoC x 1.0” Tk., 1-1/4” Pin Holes 6 AUTM5328 6813220522 / 6813220022 AR Spring Pin, 1-1/8” Od. x 7.0” Lg. x 5-3/8” CtoC AUTM5284 1612373000 6 Spring Pin, 1-1/4” Od. x 6-31/32” Lg. x 5-3/8” CtoC, Use w/4.0” Spring and AUTOGB-RNK or AUTOGB-TNK Bushing 7 AUTM5286 1612302000 6 Threaded Spring Pin, 1-1/4”-7 x 7-1/8” Lg. x 5-3/8” CtoC, For AUTMTB170 Bushing 8 AUTOGB-PLK 6813220250 6 Bushing, 1-1/8” Id. x 1-3/8” Od. x 4.0” Lg. AUTOGB-RNK 6813220150 6 Bushing, 1-1/4” Id. x 1-1/2” Od. x 4.0” Lg. 9 AUTMTB170 1612301000 6 Threaded Bushing, 1-1/2” Od. x 4.0” Lg. x 1-1/4”-7 Thrd. 11 AUTMFL84 1609598000 4 Sleeve, 1-1/4” Od. x 1.0” Id. x 1.0” Lg. 12 AUTMFL80 2309860012 8 Shim, 1-7/8” Od. x 1/32” Tk. x 1-1/4” Hole AUTMFL82 2311656018 8 Shim, 2-1/4” Od. x 5/32” Tk. x 1-1/4” Hole 14 MO 65103 1012030002 / 1012032000003 2 Shock Verify w/Shock Catalog, A89429, Most Common, Eye/Eye, EB3/EB3 21 MO 66658 6813230900 2 Shock, Verify w/Shock Catalog, Eye/Stud, S21/ES36 AR = As Required (8) AUTOGB-PLK AUTOGB-RNK (6) AUTM5328 AUTM5284 (12) AUTMFL80 AUTMFL82 (12) AUTMFL80 AUTMFL82 (9) AUTMTB170 (11) AUTMFL84 (7) AUTM5286 (21) MO 66658 (14) MO 65103 (12) AUTMFL82 (11) AUTMFL84 (5) AUTM1678 (7) AUTM5286 (9) AUTMTB170 (12) AUTMFL80 (12) AUTMFL80 (12) AUTMFL82 (6) AUTM5328 (5) AUTM1678 (8) AUTOGB-PLK (7) AUTM5286 (11) AUTMFL84 (9) AUTMTB170 (12) AUTMFL80 AUTMFL82 (12) AUTMFL80 AUTMFL82 (12) AUTMFL80 AUTMFL82 (12) AUTMFL80 AUTMFL82 (5) AUTM1678 AUTM1836 AUTM1306 (5) AUTM1678 AUTM1836 AUTM1306 (6) AUTM5328 AUTM5284 (8) AUTOGB-PLK AUTOGB-RNK (7) AUTM5286 (11) AUTMFL84 (9) AUTMTB170 (3) AUTM1697 (4) AUTM1699 Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 7 INTERNATIONAL NAVISTAR Front: 25–2600, 81–8300, 91–9900 4” Wd. w/TB’s & Embossed Pin Key Part Number OEM Ref. Req. Description 8 AUTM5268 507203C1 / C2 AR Spring Pin, Threaded, 1-3/8”-6 x 7-3/4” Lg., 5-3/4” CtoC AUTM4908 688952R1 AR Spring Pin, Threaded, 1-3/8”-6 x 7-3/4” Lg., 5-3/4” CtoC 17 AUTM1543 3500954C1 2 Shackle Hanger, Threaded, uses AUTM5268, 91, 92, 94, 9900, w/o Reinforce 18 AUTMR568 503611C1 AR Bushing, 1.0” Id. x 1-3/4” Od. x 4.0” Lg., w/Pin 19 AUTMTB76 688951R1 4 Bushing, 1-3/4” Od. x 4.0” Lg. x 1-3/8”-6 Thrd. 20 AUTM1630 1654269C1 4 Side Bar, 1-1/8” Tk. x 5-3/4” Lg. x 3-1/4” CtoC, 1.0” Pin, (I-120S) SBA & SFA, LO PRO Code02ADG, Sub For M1680 1654035C1 Alum. 25 MO 65109 1667520C1 2 Shock, Eye/Eye, Verify w/Shock Catalog, A85044, A89440, ES36/ES36 27 MO 65107 1664788C2 2 Shock, Stud/Eye, Verify w/Shock Catalog, S21/ES36 AR = As Required w /AUTMTB76 STD. 29” x 29” AUT55-1176 AUT55-144 AUT55-120 STD. 25” x 29” AUT55-1208 SPRING CHART (17) AUTM1543 (18) AUTMR568 (8) AUTM5268 AUTM4908 (8) AUTM5268 AUTM4908 (19) AUTMTB76 (19) AUTMTB76 (19) AUTMTB76 (20) AUTM1630 (18) AUTMR568 (27) MO 65107 (25) MO 65109 Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 8 (3) AUTM1559 (8) AUTMIH71 AUTMIH75 AUTMIH73 (9) AUTMIH70 AUTMIH72 (4) AUTMR782 AUTMR783 (7) CAS74736 (6) MO 65492 (5) AUTTMR533 (1) AUT171.H00500COE (2) AUTMSRK582 Key Part Number OEM Ref. Req. Description 1 AUT171.H00500COE 2505183C91 / 4C4Z5B710AA 1 Height Control Valve w/Integral Dump Valve, Reuse Brackets 2 AUTMSRK582 2505187C91 / 4V4Z2W107BA 1 Linkage Kit 3-5/8” to 19-5/8” Adjustable 3 AUTM1559 3544131C2 / 2591842C92 2 Hanger 4 AUTMR782 3538115C1 / W300861 2 Bushing w/Flange AUTMR783 2 Bushing w/Flange, Oversized 5 AUTTMR533 358088C1 / 3548381C1 1 T/Rod 25-3/8” Lg. CtoC 6 MO 65492 3573265C1 2 Shock 7 CAS74736 3541731C1 2 Air Spring 8 AUTMIH71 65640001 / 3624479C1 AR Shim 0.0312”, 5-11/16” CtoC AUTMIH75 65640002 / 3624480C1 AR Shim 0.0625”, 5-11/16” CtoC AUTMIH73 65640003 / 3624481C1 AR Shim 0.125”, 5-11/16” CtoC 9 AUTMIH70 65640001 / 3624479C1 AR Shim for T/Rod, 0.0312”, 4-3/8” CtoC AUTMIH72 65640003 / 3624481C1 Shim for T/Rod, 0.125”, 4-3/8” CtoC INTERNATIONAL NAVISTAR Rear: New Corporate Air IROS ® 2002-2010 SPRING CHART Tandem AUT55-1235 LH w/bushing AUT55-1237 RH w/bushing AR = As Required Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 9 Key Part Number OEM Ref. Req. Description 1 AUTM1544 1680506C91 / 501556C2 2 Front Hanger 2 AUTMIH52 571960C1 2 Wear Pad 3 AUTTMR510 193920C1 2 Rigid T/Rod, 18-1/8” Forged, w/AUTTRB6820 4 AUTTMR533 358088C1 / 3548381C1 / 501565C2 / 4C4Z4612AA 1 T/Rod, 25-3/8”, Transverse Mount Only 5 AUTTRB6165 (rubber) / STG11714 (poly) 240760 4 Bushing, 2-15/32” Od. x 4-3/8” CtoC, For 5/8” Bolts AUTTRB6164 (rubber) 44694000 / 227710 4 Bushing, 2-17/32” Od. x 4-3/8” CtoC,, For 5/8” Bolts AUTTRB6820 (rubber) 44695000 / 227720 4 Bushing, Straddle, 2-3/4” Od. x 4-3/8” CtoC, For 5/8” Bolts, Use w/2 Pc. Rods AUTTRB6112 (rubber) 1693061C1 4 Bushing, Taper Stud 6 CAS64262 1660581C1 / 501559C1&2 2 Air Spring, No Bumper CAS69646 1686386C1 / 1670043C1 2 Air Spring, No Bumper, 2 Studs CAS73770 2027911C1 / 2027911C2 2 Air Spring, No Bumper, 1 Stud 7 AUT171.H00450CE H00450CA / H00450CE 1 Height Control Valve, Hadley Type 8 AUTMSRK582 2505187C91 / 4C4Z2W107BA 1 Linkage Kit, Universal, 3-5/8” to 19-5/8” 9 AUTMIH09 579637C2 AR Shock Bracket, LH AUTMIH11 579638C2 AR Shock Bracket, RH 10 MO 65409 1675455C1 / 1690035C1 / 501553C91 / 2018987C1 2 Shock 11 LH 34SR35-14 590621C1 4 U-bolt Kit, 3/4” x 3-1/2” SR x 13-1/4 Gr8 LH 78SR35-15 1610312C2 4 U-bolt Kit, 7/8” x 3-1/2” SR x 15 Gr8 12 AUTMIH70 488917C1 AR Shim, 1/32” Tk. 4-3/8” CtoC AUTMIH72 590752C1 Shim, 1/8” Tk. 4-3/8” CtoC INTERNATIONAL NAVISTAR Rear: Z 3-1/2” – Air Spring 1978-2001 SPRING AUT55-1195 Tandem 5 Hole Ends (1) AUTM1544 (4) AUTTMR533 (10) MO 65409 (9) AUTMIH09 AUTMIH11 (6) CAS64262 CAS69646 CAS73770 (2) AUTAUTMIH52 (8) AUTMSRK582 (3) AUTTMR510 (5) AUTTRB6165 / STG11714 AUTTRB6164 AUTTRB6820 AUTTRB6112 (7) AUT171.H00450CE (11) LH 34SR35-14 LH 78SR35-15 (12) AUTMIH70 AUTMIH72 AR = As Required Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 10 Key Part Number OEM Ref. Req. Description 1 AUTM1544 1680506C91 / 501556C2 2 Front Hanger Single Axle & Tandem 2 AUTMIH52 571960C1 2 Wear Pad Use w/AUTM1544 3 AUTTMR510 493920C1 2 Rigid T/Rod 18-1/8”, Forged, w/AUTTRB6820, OEM is AUTTRB6164 4 AUTTMR512 493921C1 2 Rigid T/Rod 22”, Forged, Rebushable, w/AUTTRB6820, OEM Uses AUTTRB6164 5 AUTTRB6820 (rubber) 44695000 / 227720 8 Bushing 5/8” Bolts, 2-3/4” Od. x 4-3/8” CtoC, Use w/2 Pc., Use w/AUTTMR510 & AUTTMR512, Poly AUTTRB6820UB AUTTRB6164 (rubber) 44694000 8 Bushing 2.5” Od. x 4-3/8” CtoC x 5/8” Bolts, Use w/Old AUTTMR508, Verify Size, Premium Poly AUTTRB6164E 6 AUTAUBK8363-152 1610312C2 8 Ubolt Kit 7/8” x 3-1/2” Sr. x 15.0” Gr8, Verify AUTAUBK8353-152 581743C1 8 Ubolt Kit 3/4” x 3-1/2” Sr. x 15-1/4” Gr8, Verify 7 MO 66956 2 Shock Verify w/Shock Catalog, AUTA85003, AUTA89411, ES90/ES90 (1) AUTM1544 (2) AUTMIH52 (3) AUTTMR510 (4) AUTTMR512 (7) MO 66956 (5) AUTTRB6820 AUTTRB6164 (5) AUTTRB6820 AUTTRB6164 INTERNATIONAL NAVISTAR Rear: Corporate 3-1/2” Single & Tandem Axles (6) AUTAUBK8363-152 AUTAUBK8353-152 Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 11 KENWORTH Front: C500B/550B, K100/300, T300/400/450/600/800/2000, W900B, L & S Key P/N OEM Ref. Req. Description 1 AUTMK16925 K056474 / K056508 / K056598 / K056472 / K056615 / K056627 2 Threaded Hanger Cast, Repls. Aluminum K056474, Use AUTM5212 Pin 2 AUTMK16944 K056595 / K056596 2 Hanger T300, w/AUTOGB-RNK, Uses AUTM5308 1-1/4” Push Pin 3 KF BSG0068-1 5295 6 Threaded Bushing 1-3/4” Od. x 4.0” Lg. x 1-3/8”-6 Thrd., Use w/AUTM5194, AUTM5360 & AUTM5212 Pins AUTMTB186 B131002 6 Threaded Bushing 52.8mm Od. x 101mm Lg., Uses AUTM5449 Pin, M33.5-4.0 5 AUTMR836 (rubber) B651006 6 RB Bush & Pin Newer, T2000, 1-3/4” Od. x 7-1/2” Lg. x 6-5/16” CtoC AUTMR862 (rubber) B651007 / B651012 6 RB Bush & Pin w/900s, 2-1/16” Od. x 7-1/2” Lg. x 6-5/16” CtoC AUTMR744 (rubber) B651001 6 RB Bush & Pin Newer, T2000, 1-3/4” Od. x 7-1/8” Lg. x 5-7/16” CtoC 6 AUTM5194 K179378 2 Thrd. Spring Pin Front, 1-3/8”-6 x 7-3/8” Lg., 5-3/4” CtoC, Grease on Smaller End, Uses AUTMTB160 AUTM5360 6262 2 Thrd. Spring Pin Front, 1-3/8”-6 x 7-3/8” Lg., 5-3/4” CtoC, Grease on Larger End, Uses AUTMTB160 7 KF BSP70-1 5296 4 Thrd. Spring Pin Shackle, 1-3/8”-6 x 7-1/4” Lg. x 5-3/4” CtoC, Uses AUTMTB160 8 AUTM1838 K2098 / K20982 / K20987 / K20981 / K20989 4 Side Bar Offset, W900B 3/’91, T600A, T800, T400, T450, Uses Thrd. Pin 9 AUTM1225 P162563 4 Side Bar Offset, T300, K300, 6.0” Lg. x 3-1/2” CtoC, 1-1/4” Holes, Uses AUTM5308 10 AUTM1214 K20936 / K20983 4 Side Bar Convent. T600A&B, Opt. for COE, 6-5/16” Lg. x 4.0” CtoC, Thrd. Pin AUTM876 B206006 / K20975 4 Side Bar 6-3/8” Lg. x 4.0” CtoC, Use w/MR Bushing AUTM877A B201007 4 Shackle Aluminum, 6-3/8” Lg. x 2.0” Wd. x 1-1/4” Thk. x 4.0” CtoC 11 AUTMK16921 K2214737 AR Spacers 4.0” Wd. x 6.0” Lg. x 1.0” Hgt. AUTMK16922 K2213651 / K2214785 AR Spacers 4.0” Wd. x 6.0” Lg. x 1/2” Hgt. AUTMK16923 K2214293 AR Spacers 4.0” Wd. x 6.0” Lg. x 2.0” Hgt. 12a MO 65159 665858 2 Shock Eye/Eye, T600, T602, T660, T800, T2000, W900 12K &13.2K, EB3/ES174 12b MO 65102 K37311 / K37316 / K37326 / K37327 2 Shock Eye/Eye, Can Use A85305, A89410, Full Taper Spg., Multiple Models, EB3/EB3 13 AUTM1820 B1110345 2 Shackle Hanger w/AUTMTB178, B111033 Cast# 14 AUTM1825 B1110347 2 Shackle Hanger w/AUTMR599 High Confine Bushing, B111033 Cast# 15 AUTM1813 B1110341 2 Shackle Hanger w/AUTMR836, 6-3/32” Bolt Hgt., B111033 Cast# AUTM1823 B1110344 2 Shackle Hanger w/AUTMR744, B111033 Cast# AUTM1824 B1110346 2 Shackle Hanger w/AUTMR902, B111033 Cast# 16 AUTOGB-RNK 6 Bushing 1-1/4” Id. x 1-1/2” Od. x 4.0” Lg., Use w/AUTM5308 Pin AUTMPB60 HBU544 6 Bushing w/Seals, Use w/AUTM5308 Pin T170/T300 ’94-’06, w/RNK’s AUT75-208 AUT75-210 K100 SBA ’84-’03 T400/450 ’88-’03 T600 - 800 ’85-’04 64” w/MTB160’s AUT59-446 AUT59-428 AUT59-400 AUT59-410 T2000 ’96-’10 w/MR744’s AUT59-468 K300 ’93-’95 w/RNK’s AUT75-210 AUT75-208 C500B/550B ’04-’10 w/MTB160’s AUT59-428 AUT59-446 AUT59-400 AUT59-410 W900B/L w/MTB160’s ’82-’10 AUT59-366 AUT59-408 SPRING CHART (5) AUTMR836 AUTMR862 AUTMR744 (5) AUTMR836 AUTMR862 (7) KF BSP70-1 (9) AUTM1225 (9) AUTM1225 (12b) MO 65102 (12a) MO 65159 (1) AUTMK16925 (2) AUTMK16944 (14) AUTM1825 (13) AUTM1820 (15) AUTM1813 AUTM1823 AUTM1824 (6) AUTM5194 AUTM5360 (3) KF BSG0068-1 AUTMTB186 (16) AUTOGB-RNK AUTMPB60 (3) AUTMTB160 AUTMTB186 (10) AUTM1214 AUTM876 AUTM877A (8) AUTM1838 (10) AUTM1214 AUTM876 AUTM877A (11) AUTMK16921 AUTMK16922 AUTMK16923 AR = As Required Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 12 KENWORTH Rear: AG100 Airglide ® Key Part Number OEM Ref. Req. Description 1 AUTMK16938 K055405 4 T/Rod Bracket 4-3/8” CtoC, w/ 2 Holes @ 5/8” 2 AUTTMR69 K195376 / 925031 2 T/Rod 24.0” CtoC, K195374 Cast#, Uses 1-AUTTRB6112 & 1-AUTTRB6820 3 AUTTMR67 K195375 / 944270 2 T/Rod 24.0” CtoC, For 52.0” Spreads, K195374 Cast#, Uses 2-AUTTRB6820 AUTTMR75 925150 2 T/Rod 25.0” CtoC, For 54.0” Spreads, Uses 2-AUTTRB5033 4 AUTTRB6820 (rubber) 44695000 / 227720 AR Bushing 2-3/4” Od. x 4-3/8” CtoC, 5/8” Bolts 5 AUTTRB6112 (rubber) 44697000 / 229610 2 Bushing Taper Stud, Uses EN110, 1-1/4” x 2-3/4” x 8.0” 8 CAS64255 K3036 / K30314 / K30315 8 Air Spring Verify w/Air Spring Catalog, Prior ‘94 CAS64256 K30316 8 Air Spring Verify w/Air Spring Catalog, ‘95 & Up 9 AUTMK16913 K272145 2 Bracket Fabricated, Uses AUTMK16914 Mount 10 AUTMK16917 K274184 / 400234 2 Bracket Cast Aluminum, ’94 & Up 11 AUTMK16914 K1972943 / K1975168 2 Mount Aluminum, For AUTMK16913 12 AUTMK16915 K071304 4 Mount Cap Stabilizer Bar 13 AUTKB321 K06650 / K06658 4 Bushing Stabilizer Bar 14 AUTMK16960 K2021730 2 Sway Bar 2.0” Bar x 41-1/8” CtoC, 2-AUTTRB6820 15 MO 65404 K374C7 / K37429 / K37432 / K3747 / K3749 4 Shock Verify w/Shock Catalog, A85326, A89423, S42/S42 16 AUT171.H00450CA H00450CA 1 Hgt. Control Valve 17 AUTMSRK582 HPB4503 1 Linkage Kit 3-5/8” to 19-5/8”, Adjustable 18 AUTMK16916 K048449 / 501122 8 Air Spring Bracket Upper 19 AUTTRB6820 44695000 / 227720 AR Bushing 2-3/4” Od. x 4-3/8” CtoC, 5/8” Bolts 20 AUTMK16911 K2213057 8 Airbag Spacer, Use w/AB1DK20D-9422 Air Spring (1) AUTMK16938 (5) AUTTRB6112 (5) AUTTRB6112 (2) AUTTMR69 (2) AUTTMR69 (17) AUTMSRK582 (15) MO 65404 (14) AUTMK16960 (13) AUTKB321 (15) AUT65404 (20) AUTMK16911 (20) AUTMK16911 (20) (20) (12) AUTMK16915 (11) AUTMK16914 (16) AUT171.H00450CA (4) AUTTRB6820 (4) AUTTRB6820 (3) AUTTMR67 AUTTMR75 (8) CAS64255 CAS64256 (8) (18) AUTMK16916 (18) AUTMK16916 (19) AUTTRB6820 (19) AUTTRB6820 (8) CAS64255 CAS64256 (10) AUTMK16917 (9) AUTMK16913 AR = As Required (8) Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 13 KENWORTH Rear: AG380 Airglide ® Key Part Number OEM Ref. Req. Description 3 AUTMR828 C136001 4 Bar Pin Bushing, For 1 End of Spring 4 AUTMR830 C136002 4 Bushing, Hollow, For 1 End of Spring 7 CAS65990 C816000 / C811003 4 Air Spring 9 AUTTMR537 C656000001 / C656011001 2 T/Rod, Front, 23-3/4” Lg., 937560 AUTTMR539 C656000002 / C656011002 2 T/Rod, Rear, 24-5/8” Lg., 937561 10 AUTTRB6185 47691000 4 Bar Pin Bushing, For Straddle End of T/Rods AUTTMR537 & AUTTMR539 11 AUTTRB6201 4 Bushing, For Hollow End of T/Rods AUTTMR537 & AUTTMR540 15 AUTMHS68 49689000 AR Shim, Align. 1/16” Thk., 16 Ga., 4-3/8” CtoC 16 AUTTMR553 C656002 / C656009 / 937530 / TR030020010 2 T/Rod, 25-9/16” CtoC, Track Rod 26 MO 65495 C716000 / C711002 4 Shock, Verify, w/Shock Catalog, A89451, ES174/ES136 33 AUTMIH71 65640001 / 3624479C1 AR Shim 0.0312” AUTMIH75 65640002 / 3624480C1 AR Shim 0.0625” AUTMIH73 65640003 / 3624481C1 AR Shim 0.125” AR = As Required (7) CAS65990 (11) AUTTRB6201 (9) AUTTMR537 AUTTMR539 (33) AUTMIH71 AUTMIH75 AUTMIH73 (10) AUTTRB6185 (3) AUTMR828 (4) AUTMR830 (15) AUTMHS68 (16) AUTTMR553 (26) MO 65495 Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 14 PETERBILT Front: 4” COE & Conventional, ‘82-Present Key Part Number OEM Ref.6 Req. Description 1 KF BSP50-1 0201781 / 0201767 6 Spring Pin ’87-’97, 1-1/4” Od. x 6-7/8” Lg. x 5-5/16” CtoC, For AUTM1500 & M1502 KF BSP12-17 0201561 6 Spring Pin ’82-’96, 1-1/4” Od. x 6-1/8” Lg. x 5-1/16” CtoC, For AUTM1216 2 AUTOGB-RNI AR Bushing 1-1/4” Id. x 1-1/2” Od. x 3-1/2” Lg. AUTOGB-RNK AR Bushing 1-1/4” Id. x 1-1/2” Od. x 4” Lg. 3 AUTM1500 0201784 / 0201783 4 Side Bar ’87 & up, 1-1/8” Tk. x 6” Lg. x 3-1/2” CtoC, 1-1/4” Pin AUTM1502 0201747 / 0201807 4 Side Bar ’87 & up, 1-1/8” Tk. x 7-1/2” Lg. x 5-1/8” CtoC, 1-1/4” Pin AUTM1216 0201154 4 Side Bar COE, 1” Tk. x 5-7/8”Lg. x 3-1/2” CtoC, 1-1/4” Pin, Use w/ AUTM5274 4 AUTM1710 0201800M001 2 Shackle Hanger ’87 & Up Con., 4.0” Wd. Spg., 6-1/4” Bolt Hgt., 5/8” Bolt Holes, Cast AUTM1817 0201800M001 / B11603M03 2 Shackle Hanger ’87 & Up Conventional, 4.0” Wd. Spg., 6-1/4” Bolt Hgt., 3/4” Bolt Holes, Cast (Add’l OEM # 0201800M003) 5 AUTM1715 0204001M002 / B1110342 / 0204001M001 2 Shackle Hanger Mod 387, w/AUTMPB60, 6.0” Bolt Hgt., Cast, B111033 Cast# AUTM1715A 2 Shackle Hanger Aluminum Version of AUTM1715 AUTM1811 0202311M001 2 Shackle Hanger 6-1/4” Bolt Hgt., Aluminum AUTM1819 2 Shackle Hanger 6-1/4” Bolt Hgt., Cast 6 MO 65101 665928 / 680281 / 0202737 / 0202742 2 Shock Verify w/Shock Catalog, A89408, For 357; 375, 376, 377, 378, 379, 385 w/o SBA, EB2/EB2 MO 65113 665932 / 0202738 / 0202741 2 Shock Verify w/Shock Catalog, A89413, For 357, 362 SFA; 372, 375, 377, 378, 379, 385, 387, SBA, EB2/EB2 7 AUTM1757 0203041 2 Top Plate Verify, w/Shock Mount, Use MMB989 8 AUTMR836 (rubber) B651006 Bushing 6-3/16” CtoC, Use w/AUTM1813 AUTMR902 (rubber) B656005 / 52375 Bushing 5-7/16” CtoC, Use w/AUTM1824 (1 ) KF BSP50-1 KF BSP12-17 (1) KF BSP50-1 KF BSP12-17 (3) AUTM1500 AUTM1502 AUTM1216 (3) AUTM1500 AUTM1502 AUTM1216 (6) MO 65101 MO 65113 (5) AUTM1715 AUTM1811 AUTM1819 (4) AUTM1710 AUTM1817 (7) AUTM1757 (8) AUTMR836 AUTMR902 (8) AUTMR836 AUTMR902 (2) AUTOGB-RNI AUTOGN-RNK (2) AUTOGB-RNI AUTOGN-RNK AR = As Required SPRING w/ AUTOGB-RNK AUT75-210 AUT75-212 Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 15 PETERBILT Rear: Flex Air ® Key Part Number OEM Ref. Req. Description 2 AUT75-167 C816001 / C816001A 4 Spring, Mustache Look, w/Bushings 3 AUTMR828 C136001 4 Bar Pin Bushing, For 1 End of Spring 4 AUTMR830 C136002 4 Bushing, Hollow, For 1 End of Spring 7 CAS65990 C816000 / C811003 4 Air Spring, 8812, 8814 9 AUTTMR537 C656000001 / C656011001 2 T/Rod, Front, 23-3/4” Lg., 937560 AUTTMR539 C656000002 / C656011002 2 T/Rod, Rear, 24-5/8” Lg., 937561 10 AUTTRB6185 47691000 4 Bar Pin Bushing, For Straddle End of T/Rods AUTTMR537 & AUTTMR539 11 AUTTRB6201 4 Bushing, For Hollow End of T/Rods AUTTMR537 & AUTTMR540 15 AUTMHS68 49689000 AR Shim, Align. 1/16” Thk., 16 Ga., 4-3/8” CtoC 16 AUTTMR553 C656002 / C656009 / 937530 / TR030020010 2 T/Rod, 25-9/16” CtoC, Track Rod 26 MO 65495 C716000 / C711002 4 Shock, Verify, w/Shock Catalog, A89451, ES174/ES136 33 AUTMIH71 65640001 / 3624479C1 AR Shim 0.0312” AUTMIH75 65640002 / 3624480C1 AR Shim 0.0625” AUTMIH73 65640003 / 3624481C1 AR Shim 0.125” AR = As Required (7) CAS65990 (11) AUTTRB6201 (9) AUTTMR537 AUTTMR539 (33) AUTMIH71 AUTMIH75 AUTMIH73 (10) AUTTRB6185 (3) AUTMR828 (4) AUTMR830 (15) AUTMHS68 (16) AUTTMR553 (26) MO 65495 Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 16 Key Part Number OEM Ref. Req. Description 1 AUTM1750 0144406 / 0148280M002 2 Hanger, Older Style AUTM1977 0142590M004 / 0148280M004 2 Hanger, Newer Style, After 7/93 2 AUTMPB70 2312566 2 Wear Pad Kit for 1/2” Bolts AUTM1751 0307296 2 Wear Pad Kit for 5/8” Bolts 3 AUTMPB66 2 Bolt Kit 5/8”-18 x 7-1/2” w/roller & hardware 4 AUTTRB6820 (rubber) 44695000 / 227720 2/4 Bushing for 5/8” Bolts, 1-1/16” ld. x 2.0” Od. x 5-3/16” Lg 5 AUTTRB6822 (rubber) 227723 2 Bushing 2-3/4” Od. x 4-3/8” CtoC, For 3/4” Bolts 6 AUTTMR517 0304119 / 924170 2 Rigid T/Rod 17.34” with 5/8” Bolts on T/R Axle Bracket Rebushable AUTTMR520 0304327 / 924175 2 Rigid T/Rod 17.34” with 3/4” Bolts on T/R Axle Bracket Rebushable 7 AUTPD001 0302559L / 0308403L 1 Air Spring Paddle LH, Cast to ‘99, 40K 0306796L / 0307346L 1 Air Spring Paddle LH, OEM is Aluminum, 40K AUTPD002 0302559R / 0308403R 1 Air Spring Paddle RH, Cast to ‘99, 40K 0306796R / 0307346R 1 Air Spring Paddle RH, OEM is Aluminum, 40K 8 AUTAUBK8374-16 0303134151 / 0304516150 / 030451155 2 U-Bolt Kit, 1.0” x 4.0” Sr. x 16.0” Lg 9a MO 65116 0304176 / 0301635 2 Shock 9b MO 65402 0304629 / 0307421 2 Shock 10 AUTM1904 0302435 / 0306830 2 T/Rod Bracket Frame Side, 3/4” Bolts 11 AUTTMR518 0302439 1 T/Rod Rigid 22-7/8” CtoC Rebushable 12 AUTTRB6164 (rubber) 44694000 / 227710 2 Bushing 2-17/32” Od. x 4-3/8” CtoC, for 5/8” Bolts 13 CAS64274 0304759 / 0307112 / 0302456 2 Air Spring (additional OE#’s 0301649 / 0306746 / 0302038) 14 AUT75-125 C816007 / 0302432 2 Spring 15 AUTMHS68 AR Shim, 1/6” Thick 4-3/8” CtoC 16 AUT171.H00500CA H00500CA 1 Height Control Valve Hadley Ser. 500 17 AUTMSRK582 HPB4503 / 0306224 1 Linkage Kit 3-5/8” to 19-5/8”Adjust., Use w/ All Valves, OEM is fixed 18” PETERBILT Rear: Air Trac ® (2) AUTMPB70 AUTM1751 (3) AUTMPB66 (8) AUTAUBK8374-16 (14) AUT75-125 (13) CAS64274 (9a) MO 65116 (9b) MO 65402 (12) AUTTRB6164 (11) AUTTMR518 (10) AUTM1904 (4) AUTTRB6820 (5) AUTTRB6822 (6) AUTTMR517 AUTTMR520 (7) AUTPD001 AUTPD002 (1) AUTM1750 AUTM1977 (15) AUTMHS68 (16) AUT171.H00500CAOE (17) AUTMSRK582 AR = As Required Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 17 PETERBILT Rear: Air Leaf ® Key Part Number OEM Ref. Req. Description 1 AUTM1642 0144585M001 / 0121518 2 Hanger 2 AUTTRK5905 (rubber) 03AL1 2 Bolt & Bushing Kit Includes Bushings, Sleeve, Washers & Hardware 3 AUTM1640 0301654 2 Eye Casting 4 AUTMPB114 2 Rebound Kit 1/2” x 6-1/2”Lg., w/Roller & Hardware 5 AUTM888 0301657 / 0307865 2 Ubolt Plate For Spring Eye, 4.0” Wd. x 3-1/2” Lg. 6 AUTPD001 0302559L / 0308403L 1 Air Spring Paddle LH, Cast to ’99, 40K 0306796L / 0307346L / 0308402L 1 Air Spring Paddle LH, OEM is Aluminum, 40K AUTPD002 0302559R / 0308403R 1 Air Spring Paddle RH, Cast to ’99, 40K 0306796R / 0307346R / 0308402R 1 RH, OEM is Aluminum, 40K 7 AUTAUBK8374-16 0303134151 / 0304516150 / 0304516155 2 Ubolt Kit 1.0” x 4.0” Sr. x 16.0”, Verify, OEM is 15-1/4” 8 AUTM822 0301656 2 Ubolt Saddle OEM is Aluminum 9 AUTTMR518 0302439 / 922820 1 T/Rod Rigid 22-7/8” CtoC, w/AUTTRB6164’s 10 AUTTRB6164 (rubber) 44694000 / 227710 2 Bushing 2-17/32” Id. x 4-3/8” CtoC, For 5/8” Bolts 11 AUT171.H00500CAOE H00500CA 1 Height Control Valve Hadley Ser. 500 12 AUTMSRK582 HPB4503 / 0306224 1 Linkage Kit 3-5/8” to 19-5/8” Adjust., Use w/All Valves, OEM is Fixed 18.0” 13 CAS64274 0304759 / 0307112 / 0302456 / 0301649 2 Air Spring (Add’l OEM’s 0306746 / 0302038) 14a MO 65116 0304176 / 0301635 2 Shock Verify w/Shock Catalog, A89422, Eye/Eye, EB3/EB3 14b MO 65402 0304629 / 0307421 2 Shock Verify w/Shock Catalog, A89424, Stud/Eye, S21/EB3 15 AUTWA371 0307148 4 Wear Washer 16 AUTAUBK8254-06 0301661 / 0304523 2 Ubolt Kit 3/4” x 4.0” Sq. x 6.0” Lq., OEM is 5-5/8” Lg. AUTAUBK8254-05 0305915 2 Ubolt Kit 3/4” x 4.0” Sq. x 5.0” Lq. (13) CAS64274 (14a) MO 65116 (14b) MO 65402 (15) AUTWA371 (3) AUTM1640 (5) AUTM888 (8) AUTM822 (6) AUTPD001 AUTPD002 (1) AUTM1642 (9) AUTTMR518 (11) AUT171.H00500CAOE (12) AUTMSRK582 (10) AUTTRB6164 (2) AUTTRK5905 (4) AUTMPB114 (7) AUTAUBK8374-16 (7) AUTAUBK8374-16 SPRING AUT75-129 (16) AUTAUBK8254-06 AUTAUBK8254-05 (16) AUTAUBK8254-06 AUTAUBK8254-05 Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 18 PETERBILT Rear: Low Mount Air Leaf ® Key Part Number OEM Ref. Req. Description 1 AUTMPB75758 0146758M001 / 0149563M001 2 Hanger 2 AUTM1641 0305117 2 Cast Spring Eye Uses AUTTRK5904 3 AUTTRK5904 (rubber) / AUTTRB5904 (poly) 03AL2 2 Spring Eye Bolt & Bushing Kit w/AUTM5230, 2-AUTTRB5904, 2-AUTMPB10, AUTTRS4322S & Lock Nut 4 AUTMPB342 0305114002 AR Shim 3/32” Thk. AUTMPB341 0305114001 AR Eye Adjustment Shim 1/16” Thk. 5 AUTAUBK8253-051 0300581 2 Ubolt Kit Spring Eye, 3/4” x 3-1/2” Sq. x 5-1/8” Lg. 6 AUTM825 0305380 / 0307677 2 Ubolt Saddle 3-1/2” Wd., For FT Ubolts 7 AUTM889 0305100 / 0307678 2 Ubolt Saddle 8 AUTAUBK8673-154 0305110155 4 Ubolt Kit 1.0” x 3-1/2” Sr. x 15-1/2” Lg. FT 9 CAS64306 0306213 / 0307111 2 Air Spring 10 AUTTMR532 0305108 / TR010020210 2 T/Rod Rigid 25-3/4” CtoC, Non-Rebushable, May Require Shims 11 AUTTRB6164 (rubber) 44694000 / 227710 4 Bushing 2-17/32” Od. x 4-3/8” CtoC, For 5/8” Bolts 12 MO 65400 0305384 / 0307423 2 Shock, Can Use A89427, S21/EB3 13 AUT171.H00500CAOE H00500CA 1 Height Control Valve Hadley Ser. 500 14 AUTMSRK582 HPB4503 / 0306224 1 Linkage Kit 3-5/8” to 19-5/8” Adjust., Use w/All Valves, OEM is Fixed 18.0” - AUTMPB7546 - - Air Spring Stud (3) AUTTRK5904 / AUTTRB5904 (8) AUTAUBK8673-154 (5) AUTAUBK8253-051 (5) (2) AUTM1641 (12) MO 65400 (9) CAS64306 (6) AUTM825 (1) AUTMPB75758 (13) AUT171.H00500CAOE (14) AUTMSRK582 (4) AUTMPB342 AUTMPB341 (7) AUTM889 (10) AUTTMR532 (11) AUTTRB6164 SPRING AUT75-163 AR = As Required Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 19 MACK Rear: SW, SWW Walking Beam Key Part Number OEM Ref. Req. Description 1 AUTA846 10QK157 / 80AX300 2 Bushing Bronze, 3-1/2” Id. x 3-3/4” Od. x 3-7/16” Lg. 2 AUTMX302 43QK116 / 35AX688 4 Thrust Washer Bronze, 3-1/2” Id. x 5-5/16” Od. x 1/4” Tk. 3 AUTMX303 43QK117 4 Thrust Washer Steel, 4-3/8” Id. x 5-3/8” Od. x 3/8” Tk. 4 AUTMX301 88AX446 / 88AX449 / 88AK244 2 Collar Seal 4-3/8” Id. x 5-1/2” Od. x 9/16” Tk. 5 AUTMX305 23QJ112B 2 D-Washer 2-21/64” Id. x 4-7/8” Od. x 1/4” Tk. 6 AUTM1600K 25QJ223 AR Adjusting Nut Kit w/M1600 & Hrdw 7 AUTMTA505 1 Walking Beam Maintenance Pack 3-1/2” Bronze Center, w/ Bushings, Seal, Washers, Adj. Nut & Hrdw. 8 AUTC780412GR8 4AX320 / 6AX837 8 Insulator Box Bolt 7/8”-9 x 4-1/2” Lg. AUTF780512GR8 1AX475 8 Insulator Box Bolt 7/8”-14 x 5-1/4” Lg. AUTM4846 3AX1050 / 3AX1775 / 3AX1966 / 3AX1632 Insulator Box Bolt 7/8”-14 x 7-1/2” Lg. 9 AUTHLW108 35AX1310 8 Hard Flat Washer 9/32” Thk., 7/8” Id. 10 AUTLN106 21AX406 8 Lock Nut 7/8”-14 11 AUTM1158K 97QL339P3 / 97QL339P2 2 Trunnion Cap Kit w/Trunnion Cap, Gasket, Grease Fitting & Hrdw. 12 AUTM5164 3AX1525 2 Bolt 3/4”-16 x 5-1/2” Lg. 13 AUTABP1P 10QK365A 4 Upper Insulator 1-3/4” Dowel, 70 Duro. (ABP1P (Premium) 70 Duro) AUTABP4P 10QK370 4 Upper Insulator 1-3/4” Dowel, 70 Duro. (ABP4P (Premium) 70 Duro) 14 AUTM878 13QK246 8 Spacer 3.0” Wd. x 4.0” Lg. x 1-1/2” Tk. 15 AUTABP2P 10QK36B 4 Lower Insulator 1-3/4” Dowel, 70 Duro. (ABP2P (Premium) 70 Duro) 16 AUTA988 10QK371A 2 Bushing Rubber & Steel, 8-3/4” Wd. 17 AUTABP34HK Poly Upper/Lower Pad Kit (Includes hardware) AR = As Required (13) AUTABP1P AUTABP4P (15) AUTABP2P (9) AUTHLW108 (10) AUTLN106 (14) AUTM878 (4) AUTMX301 (3) AUTMX303 (2) AUTMX302 (2) AUTMX302 (12) AUTM5164 (16) AUTA988 (5) AUTMX305 (1) AUTA846 (1) AUTA846 (6) AUTM1600K (6) AUTM1600K (3) AUTMX303 (4) AUTMX301 (7) AUTMTA505 (11) AUTM1158K (5) AUTMX305 (2) AUTMX302 (2) AUTMX302 (1) AUTA846 (8) AUTC780412GR8 AUTF780512GR8 AUTM4846 (17) AUTABP34HK Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Rubber/Poly Mack Insulator Kit Poly Lower (Includes Hardware) Hybrid Pad Kit (rubber/poly) NEW! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 20 MACK Rear: SS44/SWS573 Camelback Suspensions Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! (10) AUTABP4P (3) AUTA758 (1) AUTM1119 (7) AUTMX301 (5) AUTMX303 (4) AUTMX302 (4) AUTMX302 (2) AUTA846 (2) AUTA846 (19) AUTM878 (6) AUTMX305 Consists Of: (2) AUTM1601 (2) AUTMX301 (4) AUTMX302 (2) AUTMX303 (9) AUTM1158K Key P/N OEM Ref. Req. Description 14 AUTC780412GR8 4AX320 / 6AX837 Insulator Box Bolt 7/8”-9 Thread x 41/2” long AUTF780512GR8 1AX475 Insulator Box Bolt 7/8”-14 Thread x 51/2” long AUTM4846 3AX1050 / 3AX1775 3AX1966 / 3AX1632 Insulator Box Bolt 7/8”-14 Thread x 71/2” long 15 AUTMTA505 1 Trunnion Kit 16 AUTHLW108 35AX1310 12 7/8” Lock Washer 17 AUTLN106 21AX406 12 7/8”-14 Lock Nut 18 AUTMUBW184 7/8” Insulator Box Washer 19 AUTM878 13QK246 8 3” Wd. x 4” Lg. x 1-1/2” Tk., Anti-Sway Spacer 20 AUTMCB700 R303195 CENTER BOLT 1/2in X 10in 21 AUT114SR4-18 U bolt kit 1-1/4” dia X 4-1/16” semi round X 18-1/2” leg AUT114SR4-16 U bolt kit 1-1/4” dia X 4-1/16” semi round X 16-1/2” leg Key P/N OEM Ref. Req. Description 1 AUTM1119 25130237 / 39QK55 2 Trunnion - New Style, No Ears 2 AUTA846 80AX300 / 10QK157 4 Bronze Bushing 3-7/16” Length 3 AUTA758 10QK255P2 / 10QK256 2 Bronze Bushing 6-15/16” Length 4 AUTMX302 35AX688 / 43QK116 4 Bronze Thrust Washer 5 AUTMX303 43QK117 2 Steel Thrust Washer 6 AUTMX305 23QJ112B 2 D-Washer 7 AUTMX301 88AX446 / 88AX449 2 Collar Seal 8 AUTM1600K 2 Adjusting Nut Kit 9 AUTM1158K 97QL339P3 2 Trunnion Cap Kit 10 AUTABP4P 10QK370 4 Rubber Upper Insulator Pad Premium 11 AUTABP2P 10QK36B 4 Rubber Lower Insulator Pad Premium 12 AUTABP34HK Mack Insulator Kit Poly Lower Hybrid Pad Kit (rubber/poly) 13 AUTM1211 97QL585 / 97QL5122 1 Trapezoid Hole Trunnion Stand Assembly AUTM1213 97QL5119M 1 Square Hole Trunnion Stand Assembly Torque Rods Available REBUSHABLE NON-REBUSHABLE (11) AUTABP2P (17) AUTLN106 (16) AUTHLW108 (14) AUTC780412GR8 AUTF780512GR8 AUTM4846 (18) AUTMUBW184 (21) AUT114SR4-18 AUT114SR4-16 (8) AUTM1600K Trapezoidal AUTM1211 Square AUTM1213 TRUNNION STAND (13) AUTM1211 AUTM1213 (7) AUTMX301 (2) AUTA846 (5) AUTMX303 (4) AUTMX302 (6) AUTMX305 (15) AUTMTA505 (12) AUTABP34HK Rubber/Poly Mack Insulator Kit Poly Lower (Includes Hardware) Hybrid Pad Kit (rubber/poly) AUTTMR561 AUTTMR557 AUTM1601K HD ADJUSTING NUT KIT AUTMTA509 HD MAINTENANCE KIT W/ BUSHING (2) AUTMX305 (4) AUTA846 (2) AUTLN100 (2) AUTF380300GR5 AUTM1601-T SPANNER WRENCH 4” Tool to install M1601 Nut SPRING CHART CAST PLATE 55” - AUT62-1430E 50” - AUT62-147 (20) AUTMCB700 Consists Of: (1) AUTM1601 (1) AUTLN100 (1) AUTF380300GR5 OEM: 25QJ223 25163838 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 21 • Heavy Duty Replacement for Original Equipment Mack Stand • Mounts from underneath the vehicle • No need to remove body components, disassemble chassis, hydraulic lines or wiring harness • Minimizes down-time... puts truck back on the job faster! MACK REPLACEMENT TRUNNION STAND SS44/SWS573 Camelback Suspensions P/N Reference OEM No. Description AUTM1211 97QL585 / 97QL5122 Trapezoid Hole Pattern/Bronze Style Trunnion AUTM1213 97QL5119M Square Hole Pattern/Bronze Style Trunnion 1 Year or 100,000 Mile Warranty AUTM1211 AUTM1213 Interchange Information (3-1/2” Shafts) Designed for 32-1/4” frame width. Advise if your application varies. Models: MR 685S RD series DM series RWL series MH series RWS series Compatible with the following MACK TRUCK models: MIXERS - Installs without removing hydraulic lines, cross members, discharge chutes or tag axles. TRASH PACKERS - Installs without removing packer. Especially helpful on “drop” style units. BLOCK TRUCKS - No need to remove outriggers or tag axles to install. ROLL-OFFS - Allows for installation without removing roll-off apparatus or hydraulic lines. DUMPS - No need to remove bed hinges, cross members or tag axles. CONCRETE PUMPING RIGS - Allows for easy installation without removing pumps and plumbing. *Spacers required for inside frame measurements wider than 32-1/4” AUTM62314 - 1/4” Square Spacers* AUTM62514 - 1/4” Trapezoid Spacers* Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! AUTABP34HK Mack Insulator Kit Poly Lower (Includes Hardware) Hybrid Pad Kit (rubber/poly) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 22 CHALMERS Rear: 800 Truck (3) AUTM18004 (1) AUTTRB6328 AUTTRB6328UB AUTTRB8644 AUTTRB8644UB (2) AUTTMR8714 AUTTMR8750 (4) AUTM11844 AUTM17984 AUTM11842 (5) AUTMLC11 (6) AUTM18006 AUTM18008 (8) MO 66636 (7) AUTBKC580512GR8F (7) AUTBKC580512GR8F We Carry a Full Line of Fully Unitized Pinion Seals Key Part Number OEM Ref. Req. Description 1 AUTTRB6328 22128 / 22082 T/Rod Bushing Rubber, 40K, Type “0” & “1” Joint, XL Series, Standard AUTTRB6328UB - T/Rod Bushing Poly AUTTRB8644 800010 T/Rod Bushing Rubber, 46K to 100K, Type “2” Joint, Standard AUTTRB8644UB - T/Rod Bushing Poly 2 AUTTMR8714 807214 Adjustable T/Rod 46K, Type “2” Joint, 21-5/8” CtoC AUTTMR8750 807250 Adjustable T/Rod 46K, Type “2” Joint, 25.0” CtoC 3 AUTM18004 800055 Spigot Cap Type “2” Joint, 46K to 100K, 4-1/2” Od. 4 AUTM11844 373020 / 373028 2 Restrictor Can #20 & #28, Standard AUTM17984 373021 / 373029 2 Restrictor Can #21 & #29, High Stability AUTM11842 373015 2 Restrictor Can 36K, #15, Standard 5 AUTMLC11 15002 2 Load Spring #20, 40K - 58K 6 AUTM18006 800117 / 800689 2 Spring Plate 40-50K, High Mount for 54” Spread, 9.3° Bend, Verify AUTM18008 800125 / 800691 2 Spring Plate 40-50K, Low Mount for 54” Spread, 12.5° Bend 7 AUTBKC580512GR8F K880231 2 Bolt Kit 5/8”-11 x 5-1/2” Lg. (HDW382) 8 MO 66636 - Shock Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 23 VOLVO / WHITE Front: VHD, VM, VN, VT Spring Key Part Number OEM Ref. Req. Description 1 AUTM5450 1075723 / 1076334 6 Threaded Spring Pin For MTB180, Greaseable to Large Head AUTM5451 20747781 6 Threaded Spring Pin For MTB180, Greaseable on Either End 2 AUTMV1643 20449442 / 20529992 / 20449439 2 Shackle Hanger LH & RH, VN, Verify, 20414793, 20529994, 20530014 3 AUTM1291 1619860 / 3171036 / 20548421 4 Side Bar Use with all Shackle Hangers except MV1659 and MV96731, Uses M5450 or M5451 Pin 4 AUTMV96589 20925089 4 Side Bar VN, 2 Holes @ 20mm, For MR657 Bushing 5 AUTMTB180 1075724 / 20409623 1075726 / 20526026 6 Bushing 45mm Od. x 105mm Lg x 33.5mm-4.0 Thrd. 6 AUTMR657 20908841 / 20533294 6 Bushing RB Bushing, VN, 20mm Id. 7 MO 65494 20513881 / 20433424 / 8078195 2 Shock Verify w/Shock Catalog, Can Use A89450, 12 to 13.2K ’08-’09, Embossed End MO 65499 665926 / 8169859 / 8086053 2 Shock Verify w/Shock Catalog, EB2/EB2 8 AUTMV96589K 2 Shackle Kit 2-MV96589, 2-MR657, 2-M5047 & Hdrw. 59” VN & VT w/MTB180’s AUT96-1308 AUT96-1318 SPRING CHART (7) MO 65494 MO 65466 (1) AUTM5450 AUTM5451 (2) AUTMV1643 (6) AUTMR657 (5) AUTMTB180 (3) AUTM1291 (4) AUTMV96589 (8) AUTMV96589K Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 24 Key Part Number OEM Ref. Req. Description 1 AUTMVV12 8061971 / 8027423 2 Wear Pad 3-1/4” Wd. x 5-3/4” Lg. 2 AUTMVV15 8079889 / 20568741 / 8081145 2 Wear Pad 3.1” Wd. x 6.025” Lg. 3 AUTTRB6164 (rubber) 350333201 / 3503300088 2 Bushing, 2-17/32” Od. x 4-3/8” CtoC, 5/8” Bolts 4 AUTM1655 8079895 / 458862 2 U-Bolt Top Plate, Bow Tie Look w/Nib, 6.69” CtoC 5 AUTM1657 8086649 2 U-Bolt Top Plate, Need 2 Pcs. Per Side 6 CAS69643 8061151 / 8169868 2 Air Spring CAS64259 350033201 / 350033203 / 350033204 / 350033209 2 Air Spring CAS74884 8079902 / 20505399 / 3934699 / 20413888 / 8084296 / 8097092 2 Air Spring 7 MO 65466 8071524 / 359013201 2 Shock MO 65415 3919950 / 8026658 / 8056892 2 Shock MO 65486 20551628 / 20433425 / 8086651 2 Shock 8 AUTTMR63 8071513 / 3187322 / 8061152 1 Rigid T/Rod 22-1/8”, 1-1/8” Od., Full Ball Ends 9 AUTTMR531 358010068 1 Rigid T/Rod 22-1/8”, Tubular 1.93” Od., HD 10 AUT171.H00450CE 3130560 / H00450CE 1 Height Control Valve, Hadley Type 11 AUTMSRK582 48100025 1 Linkage Kit 3-5/8” to 19-5/8”, Use with all Hgt. Valves 12 AUTTRB6165 (rubber) / STG11714 (poly) 240760 4 Bushing, T/Rod, 2-7/16” x 4-3/8” CtoC, with 5/8” Holes 13 AUT96-103 8065216 2 Z Spring, Before ’95, CB, 3 Hole End AUT96-1261 8180246 2 Z Spring, ’95-’98, Use Dowels, 2 Hole End AUT96-1271 8086653 2 Z Spring, ’99-’04, S/A or Front Tandem, Use Dowels, 2 Hole End AUT96-1273 8086647 2 Z Spring, ’99-’04, Rear Tandem, Use Dowels, 2 Hole End 14 AUT96-1263 8180247 2 Radius Rod, ’95-’98, Use Dowels, 1/2” x 1-7/16” Grooved 15 AUTMHS68 8020329 / 8080995 / 44RU397M AR Shim, 1/16” Thk., 4-3/8” CtoC, w/ 5/8” Holes VOLVO / WHITE Rear: Corporate Air Ride, (Mack Maxlite 40 ’04-’06), Single or Tandem (2) AUTMVV15 (1) AUTMVV12 (8) AUTTMR63 (9) AUTTMR531 (12) AUTTRB6165 / STG11714 (6) CAS69643 CAS64259 CAS74884 (7) MO 65466 MO 65415 MO 65486 (3) AUTTRB6164 (15) AUTMHS68 (4) AUTM1655 (5) AUTM1657 (14) AUT96-1263 (11) AUTMSRK582 (10) AUT171.H00450CE (13) AUT96-103 AUT96-1261 AUT96-1271 AUT96-1273 AR = As Required Please contact your Midwest Wheel Salesman if you don’t see the part you are looking for! Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 25 Key Part No. OEM Ref. Req. Description Notes 1a AUTM21072 SP0100 2 Front Hanger Straddlemount 1b AUTM21073 SP0162 2 Front Hanger Undermount 2a AUTM21074 SP0110 2 Center Hanger Straddlemount 2b AUTM21075 SP0161 2 Center Hanger Undermount 3a AUTM21076 SP0120 2 Rear Hanger Straddlemount 3b AUTM21077 SP0160 2 Rear Hanger Undermount 4 AUTEQ042 SP0131 2 Equalizer 7 AUTSRL01 XBSP005071 8 Rebound Bolt Kit 5/8”-18 x 4-1/2” 8 LH 34SQ3-11 SP0074G thru L 8 Ubolt Kit 3/4” x 3.0” Sq. x 10-3/8” Lg., Ultralite2 LH 34SQ3-13 SP0074M thru S 8 Ubolt Kit 3/4” x 3.0” Sq. x 12-3/8” Lg., Ultralite2 LH 34SQ3-16 SP0074T thru Y 8 Ubolt Kit 3/4” x 3.0” Sq. x 15-3/8” Lg., Ultralite2 LH 34RD3-15 SP00750607 thru 09 8 Ubolt Kit 3/4” x 3.0” Rd. x 14-1/2” Lg. LH 34RD3-13 SP00750201 thru 05 8 Ubolt Kit 3/4” x 3.0” Rd. x 12-1/2” Lg. 9 AUTM852 SP0136 4 Ubolt Saddle Fabricated, 3.0” Rd. x 7-1/2” Lg. 10 AUTDL295 SP0049 4 Delrin Liner 2-7/8” x 8.0” Lg. with 7/8” Hole 11 AUTSP014201 SP014201 4 Axle Seat 3/4” Hgh, 5.0”, Rd Axle AUTSP014202 SP014202 4 Axle Seat 1-1/4” Hgh, 5.0”, Rd Axle AUTSP014203 SP014203 4 Axle Seat 1-3/4” Hgh, 5.0”, Rd Axle AUTSP014704 SP014704 4 Axle Seat 2-1/4” Hgh, 5.0”, Rd Axle AUTSP014905 SP014905 4 Axle Seat 2-3/4” Hgh, 5.0”, Rd Axle 12 AUTM8286 SP0099 A/R Bottom Ubolt Plate Fabricated, 5.0” Rd. Axle 13 AUTTR009 SP0169 2 Adjustable T/Rod 19-1/4” Adjustable, No Hop 14 AUTTR005B SP0143 2 Rigid T/Rod 19-1/4” Rigid, All, Use TRB6004’s 15 AUTTRK6004B 8 Bolt & Bushing Kit w/ 7/8”-14 x 5.0” Bolt & TRB6004 16 AUTM4858 PP005075 8 Bolt 7/8”-9 x 5-1/2” 17 AUTTRB6004 PP005402 8 Bushing 7/8” Id. x 1-15/16” Od. x 3.0” Lg. STG15013 8 Bushing Poly, 7/8” Id. x 1-15/16” Od. x 3.0” Lg. TRAILER SPRING SUSPENSIONS A/R = As Required (1b) M21073 (1a) M21072 (2b) M21075 (2a) M21074 (3a) M21076 (3b) M21077 (4) EQ042 (7) SRL01 (7) SRL01 (15) TRK6004B (15) TRK6004B (15) TRK6004B (15) TRK6004B (7) SRL01 (8) 34SQ3-11 34SQ3-13 34SQ3-16 34RD3-15 34RD3-13 (8) 34SQ3-11 34SQ3-13 34SQ3-16 34RD3-15 34RD3-13 (8) (8) (12) M8286 (12) M8286 (17) TRB6004 STG15013 (17) TRB6004 STG15013 (10) DL295 (10) DL295 (9) M852 (13) TR009 (14) TR005B (9) M852 (17) TRB6004 STG15013 (17) TRB6004 STG15013 (11) SP014201 SP014202 SP014203 SP014704 SP014905 PART NO. NO. OF LEAVES AUTTRA021 1 LOW ARCH AUTTRA023 1 HIGH ARCH AUTTRA2726 3 HIGH ARCH AUTTRA2727 3 MED ARCH AUTTRA2728 3 LOW ARCH AUTTRA2740HD 3 HIGH ARCH AUTTRA2741HD 3 LOW ARCH AUTTRA2705 7 HIGH ARCH AUTTRA2260 8 HIGH ARCH SPRING CHART BINKLEY Rear: DuraLite 9000, UltraLite 2 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 26 REYCO / TRANSPRO Trailer: 86, 88, 88HD Transpro *All hangers with 1/2” holes can be drilled out to cover hangers with 5/8” holes. Customer must verify tment. FRONT HANGERS* CENTER HANGERS* REAR HANGERS* (1) M12076 (5)* M12078 (9) M12080 (13) M83457 (15) TRB6004 (17) E-9607 E-2983 (18)* TR009 (19)* TR010 (20)* M490 (25)* M12096 M12098 (30)* M8286 (31)* EQ022 (32)* EQ041 (33) TRB5544 TRB5543 (35) M4886 (36) FLN107 (39) MH558 SPRING CHART Multi 44” TRA3351 Mono 49” TRA076 TRA3385 TRA078 TRA073 TRA072 • TRA031 TRA077 TRA037 2 Lf 49” TRA3386 TRA3374 TRA3377 3 Lf 49” •• TRA3341 TRA3349 •• TRA3340 TRA3331 TRA3350 TRA3330 TRA3373 TRA3339 Multi 49” TRA3310 • TRA3309 TRA3338 TRA3319 (15) TRB6004 (17) E-9607 E-2983 (15) TRB6004 (17) FLN106 LNC106 (15) TRB6004 (17) FLN106 LNC106 (15) TRB6004 (17) E-9607 E-2983 (16) TRK6004 (20)* M490 (23) (23) (33) TRB5544 TRB5543 (35) M4886 (36) FLN107 (37) SRL01 (37) SRL01 (39) MH558 Underslung No Hop Ubolts Down (25) (42) M852 (42) M852 (25)* M12096 M12098 (23) 78RD5-13 78RD5-15 78RD5-17 (23) 78RD5-13 78RD5-15 78RD5-17 (24)* 78RD3-15 78RD3-18 78RD3-20 34RD3-XX (16) TRK6004 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 27 Key Part No. OEM Ref. Req. Description Notes 1 AUTM12076 004900(86) / 008400(88) 2 Front Hanger Undermount, 1220-00(86) & 1225-00(88) Abrasion Rest. 5 AUTM12078 006500(86) / 008800(88) 2 Center Hanger Undermount, 44”, 49”, 54” Spreads 9 AUTM12080 005300(86) / 008600(88) 2 Rear Hanger Undermount, 1221-00(88) & 1226-00(88) Abrasion Rest. 13 AUTM83457 004500 4 Wear Pad Steel Weld-In, Standard 15 AUTTRB6004 0972901 8 Bushing 7/8” Id. x 1-15/16” Od. x 3.0” Lg., Poly TRB6004UB 16 AUTTRK6004 TK7424 8 Bolt & Bushing Kit T/Rod, (86) & (88), w/TRB6004 & C780512GR5 & LNC106, (Coarse Thrd.), Poly TRK6004UB 17 EU E-9607 1434501 8 Lock Nut Flanged, 7/8”-14 Id., Can Use LN106, For TRK6004T (Fine Thrd.) EU E-2983 8 Lock Nut 7/8”-9 Id., For TRK6004 (Coarse Thrd.) 18 AUTTR009 103520 / T3035 2 Adjustable T/Rod 18-1/4” to 20-3/4”, (86) & (88), w/2-TRB6004, F & R, 49” to 121” Front, 1634901 Can Use TR061 19 AUTTR010 007520 / 057500 2 Rigid T/Rod 19-7/8”, (86) & (88), w/2-TRB6004, F & R, 49.0” to 121.0” Front 20 AUTM490 T7175 / T5488 / 046400 4 Ubolt Top Plate Ubolts Up, 5.0” Rd. Axles, 5-7/8” CtoC 23 LH 78RD5-13 010212 / 0851101 4 Ubolt Kit 7/8” x 5.0” Rd. x 12.0” Lg. LH 78RD5-15 010214 / 0851301 4 Ubolt Kit 7/8” x 5.0” Rd. x 14.0” Lg., OEM = 13-1/2” Lg. LH 78RD5-17 010216 / 0851801 4 Ubolt Kit 7/8” x 5.0” Rd. x 16.0” Lg., OEM = 15-1/2” Lg. 24 LH 78RD3-15 1624701 / 21090145 4 Ubolt Kit 7/8” x 3.0” Rd. x 14-1/2” Lg., Verify LH 78RD3-18 007816 / 21090175 4 Ubolt Kit 7/8” x 3.0” Rd. x 17-1/2” Lg., Verify LH 78RD3-20 007818 / 21009185 4 Ubolt Kit 7/8” x 3.0” Rd. x 18-1/2” Lg., Verify, (Add’l OEM 1617901) LH 34RD3-XX 19780xxx 4 Ubolt Kit 3/4” x 3.0” Rd. x (10.0” to 18.0”) Lg., Verify Length 25 AUTM12096 063601 / 083601 4 T/Rod/Seat Bracket 1.0” Hgt., 5.0” Rd. Axles, Fab., Ubolts Up or Down AUTM12098 063602 / 083602 4 T/Rod/Seat Bracket 2.0” Hgt., 5.0” Rd. Axles, Fab., Ubolts Up or Down 30 AUTM8286 0053800 / T5514 4 Bottom Ubolt Plate 5.0” Rd. Axle, Fab., Ubolts Down 31 AUTEQ022 065000 2 Equalizer Fab., 49” Space, w/TRB5544, 0738-0 Older Style w/TRB5543 32 AUTEQ041 085000 2 Equalizer Cast, 49” Space, w/TRB5544 33 AUTTRB5544 064902 2 Bushing 1.0” Id. x 3-1/4” Od. x 4.0” Lg., Newer Style, Poly TRB5544UB AUTTRB5543 1609501 / 010606 Bushing Prior 9/’86, Older Style, For Older Eq’s 0058-00 & 0758-00 Only 35 AUTM4886 000114 2 Bolt 1.0”-14 x 6-1/2” Lg. 36 AUTFLN107 027401 / 1434501 2 Flanged Lock Nut 1.0”-14 37 AUTSRL01 074100K 4 Rebound Bolt Kit 5/8”-18 x 4-1/2”, w/MH558 & LN104 39 AUTMH558 074101 Roller Only 3/4”Od 42 AUTM852 160600 / 007700 / 071600 / 2333401 4 Ubolt Top Plate Fab., 3.0” Wd. x 7-1/2” Lg., All Axles, Ubolts Down REYCO / TRANSPRO Trailer: 86, 88, 88HD Transpro HUTCH Trailer: H & CH 7700, 9700 TWS, US Widespread Key Part No. OEM Ref. Req. Description Notes 1 AUTM8095 1616901 2 Equalizer Hanger Straddlemount, 9700 42-1/2” - 49”, Uses C118612GR8 AUTM8097 1617101 2 Equalizer Hanger H9700 AUTM8288 770101 2 Front Hanger H7700 / H9700, Straddlemount AUTM8290 770201 2 Equalizer Hanger H7700 49” - 54-1/2”, Straddlemount 2@1/3” Eq. Bolt Holes AUTM8292 770301 2 Rear Hanger H7700 / H9700, Straddlemount 5/8” Rebound Bold Holes Uses SRL01 Kit AUTM8294 2072801 / 770102 2 Front Hanger H7700 / H9700, Undermount AUTM8296 770202 2 Equalizer Hanger H7700 49” - 54-1/2”, Undermount 2@3/4” Eq. Bolt Holes AUTM8298 770302 2 Rear Hanger H7700 / H9700, Undermount 5/8” Rebound Bolt Holes Uses SRL01 Kit 2 AUTMH680 1028701 2 Equalizer Bolt Kit 7700, 2 Bolt Equalizer 3 AUTBKF5542 2 Equalizer Bolt Kit 9700, 1 Bolt Equalizer 9 AUTSRL01 074100 6 Rebound Bolt Kit 5/8”-18 x 4-1/2”, w/Bolt, Tube & Lock Nut, All 10 AUTTRK6326 8 Bolt & Bushing Kit w/Bushing & Bolt Kit., 77/9700, Poly TRK6326UB, All 11 AUTTRS6326 71902 8 Bolt 1.0”-14 x 5.0” Lg., 77/9700, All 13 AUTMH456 72900 2 Lock Tab 7700, 1 Bolt Equalizer 14 AUTTRB6326 72200 8 Bushing 1.0” Id. x 1-15/16” Od. x 3.0” Lg., 77/9700, Poly TRB6326UB, All 18 AUTTRB5541 701000 2 Bushing 3-1/4” Od. x 3-7/8” Lg., 7600, 7700, 2 Bolt Equalizer 19 AUTTRB5542 1614601 2 Bushing 1-1/8” Id. x 3-3/8” Od. x 3-7/8” Lg., 96-9700, 1 Bolt Equalizer 20 AUTTR004 71305 / 1639804 2 Adjustable T/Rod 18-1/2” to 21”, w/Bushings, 7700, 9700, 97”, 109”, 121”, 5.0” Rd. AUTTR007 71310 / 1639817 2 Adjustable T/Rod 15-3/4” to 18-1/4”, w/Bushings, 7700, 9700, 97”, 109”, 121”, 5.0” Sq. (Parts & Image continued on next page...) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Automann Suspension Catalog 28 (1) Various (17) C118612GR8 (20) TR004 TR007 (21) TR005 (25) M162971 M8286 (2 ) MH680 (3) BKF5542 (9) SRL01 (9) SRL01 (18) TRB5541 STG14008 (19) TRB5542 STG14038 (9) SRL01 (9) SRL01 (6) TRK5541S (7) BKC118612GR8 (10) TRK6326 (9) SRL01 (11) TRS6326 (14) TRB6326 (11) TRS6326 (11) TRS6326 (28) M852 (13) MH456 (16) TRS4413 (13) MH456 (1) Various (26) M8284 (29) Various (20) TR004 TR007 (1) Various (9) S RL01 (9) SRL01 (17) C118612GR8 (15) TRK5544A (10) TRK6326 Complete Suspension Kits (30) (14) TRB6326 (10) TRK6326 (14) TRB6326 (28) M852 (22) 78RD3-11, -13, -15 (22) 78RD3-11, -13, -15 HUTCH Trailer: H & CH 7700, 9700 TWS, US Widespread 21 AUTTR005 71500 1 Rigid T/Rod 19-1/4”, w/Bushings, 7700, 9700 All 22 LH 78RD3-11, -13, -15 8 Ubolt Kit 7/8” x 3.0” Rd. x 14-1/2” Gr5 25 AUTM162971 1629701 4 Bottom Plate, Fab. 3/4” Ubolts, 77/9700, 61” to 81” x 4”, 97” to 121”, Use M8286 AUTM8286 71000 4 Bottom Plate, Fab. 7/8” Ubolts, 77/9700, 61” to 81” , 97” to 121” Front, 9700 26 AUTM8284 70501 / 1936001 2 Axle Seat H7700 / H9700 5.0” Rd. Axles 28 AUTM852 702900 4 Ubolt Top Plate 3.0” Wd. x 7-1/2” Lg., Fab., Ubolts Down 29 AUTEQ013 75003 1 Equalizer Feb., H, CH7600 / H, CH7700, 42-1/2” - 49” Spacing, Includes TRB5541 AUTEQ014 1913701 / 70401 1 Equalizer Cast, H, CH7600 / H, CH7700, 42-1/2” - 49” Spacing, Includes TRB5541 AUTEQ019 1615801 1 Equalizer Fab., H, CH96/9700, 42-1/2” - 49” Spacing, Includes TRB5542 AUTEQ028 1778401 / 1629001 1 Equalizer Cast, H, CH96/9700, 42-1/2” - 49” Spacing, Includes TRB5542 AUTEQ045 1616802 / 2183401 1 Equalizer Fab., H, CH96/9700, 60”, 61” Spacing, Uses C118612GR8 SPRING CHART Mono LF Taper LF Multi LF • •AUTTRA021 • •AUTTRA023 AUTTRA028 Comp. AUTTRA076 Comp. AUTTRA2757 AUTTRA2751 AUTTRA2762 AUTTRA2752 AUTTRA2735 AUTTRA2754 • •AUTTRA2726 AUTTRA2753 AUTTRA2734 • •AUTTRA2728 • •AUTTRA2741 AUTTRA2736 • •AUTTRA2740 • •AUTTRA2727 AUTTRA2716 AUTTRA2706 AUTTRA2707 AUTTRA2708 AUTTRA2737 AUTTRA2732 AUTTRA2724 AUTTRA2722 AUTTRA2718 AUTTRA2710 AUTTRA2705 • •AUTTRA2260 AUTTRA2760 AUTTRA2259 AUTTRA2739 AUTTRA2761 AUTTRA2716 (2) MH680 (3) E-9475 (9) SRL01 (9) (13) MH456 (2) MH680 (3) E-9475 (9) SRL01 (9) SRL01 (13) MH456 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

38Stemco QWIKTIE Tie Rod Assembly Advanced Technology QWIKTIE’s versatile range of adjustment makes it a flexible stock addition. QWIKTIE tie rod assemblies are highly adjustable to fit over 80% of the straight tie rod lengths and styles in the market. QWIKTIE features easy color attributes for identification and accurate installation. Patent Pending. Increased Versatility With a versatile tie rod solution, QWIKTIE tie rod assemblies reduce overhead for maximum efficiency. QWIKTIE fits from 57 3 / 8 " to 73 7 / 8 " total length from grease zerk to zerk. Increased Strength Increased strength and a more even clamping force holds the alignment longer, reducing stress on other suspension components providing increased fuel and tire mileage. Greater Accuracy Finer threads provide a more precise adjustment, reducing stress on other steering components. Threads are pre-lubricated for ease of installation and easy adjustment over time. Safe and Secure Alignment settings are easily adjusted in a timely manner to achieve a safe, secure connection between the tie rod and threaded tie rod end. QWIKTIE Tie Rod Assembly Tie Rod Assembly Making the Roadways Safer ® HIGHLY ADAPTABLE FOR MAXIMUM EFFICIENCY Designed to increase simplicity and safety. STEMCO ® QWIKTIE™ tie rod assembly offers a highly adaptable solution that can accommodate a wide range of straight tie rod lengths. SUSPENSION PRODUCTS CATALOG NUMBER 38 www.midwestwheel.com Order NLINE ™ www.midwestwheel.com Order NLINE ™ Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Stemco QWIKTIE Tie Rod Assembly MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 VERSATILE. EFFICIENT. SAFE. STEMCO and QWIKTIE are trademarks of STEMCO LP. © 2017 STEMCO LP. Printed in the USA. Part No. 577-3014 | Rev 2/17 an EnPro Industries company Canada | 877-232-9111 | 905-206-9700 5775 McLaughlin Road Mississauga, Ontario L5R 3P7 | Canada Australia | 011-61-2-9793-2599 Unit 6 CNR Rookwood & Muir Roads Yagoona NSW 2199 | Australia United States | 800-527-8492 | 903-758-9981 P.O. Box 1989 Longview, Texas 75606-1989 | US Making the Roadways Safer ® Mexico | 444-804-1736 Eje Central Sahop No 215, Zona Ind San Luis Potosi SLP 78395 | Mexico s temco.com The QWIKTIE tie rod assembly offers a highly adaptable solution that can accommodate a wide range of tie rod lengths. Increased clamping and tube strength allows it to hold alignment, reducing stress on other suspension components. Finer threads provide more precise adjustment capability. Improved clamping system includes a third relief cut to provide tighter clamping strength for a safer and more secure connection. Advanced technology in adjustment design allows greater flexibility to fit a wider selection of tie rod lengths. Increased range adjusts to fit over 80% of tie rod assembly lengths in the market (57 3 / 8 " to 73 7 / 8 ”). Limit groove indicator. Powder coated for corrosion protection. This table captures example cross references to a QWIKTIE tie rod assembly. For any given axle or tie rod end, there can be many possible combinations of cross-tube lengt hs. For example, there could be as many as 40 different assemblies using the ES423L tie rod end. Tie Rod End Industry Std. Reference Number QWIKTIE Part Number Axle Code King Pin ES3219L, ES3220R QT967SS FF-961, FF-966 K961L ES423L, ES423R FF-981, FF-986 K981R ES9001L, ES9001R 02-ADD K120I ES431L, ES431R QT108SB FL-931, FL-941 KH931L ES9328L, ES9329R E1462I/W K147E ES431L, ES431R EFA18F3, EFA20F4 K180E QWIKTIE TIE ROD ASSEMBLY QWIKTIE TIE ROD ASSEMBLY Tie Ro End Industry Std. Reference Number QWIKTIE Part Number Axle Code King Pin Replacement QWIKTIE Tie Rod Ends 12-13K lb. Axle Rated - GREEN CAP ES3 19L, ES3220R KF QT967SS F 9 1, FF-966 K961L KF QTE967L Left End Only ES423L, ES423R FF-981, FF-986 K981R KF QTE967R Right End Only ES9001L, ES9001R 02-ADD K120I 18-20K lb. Axle Rated - RED CAP ES431L, ES431R KF QT108SB FL-931, FL-941 KH931L KF QTE108L Left End Only ES9328L, ES9329R E1462I/W K147E KF QTE108R Right End Only ES431L, ES431R EFA18F3, EFA20F4 K180E This table captures example cross references to QWIKTIE tie rod assembly. For any given axle or tie rod end, there can be many possible combinations of cross-tube lengths. For example, there could be as many as 40 different assemblies using the ES423L tie rod end. April 15, 2019 (38Stemco QWIKTIE Tie Rod Assembly) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

38Stemco Kaiser Qwik Kits QWIK KIT PLUS KIT OEM KIT # AXLE CODE APP. OE PIN SPEC BUSHING INSTALL TOOL LIP SEAL INSTALL TOOL ECONOMY KIT KF K103S K F 70.103.19 329182 02AEM AFTER 10/2002 Eaton 1.359 X 7.97 KF ST-100-2 KF ST70-2 KF 50.103.19 KF K120E KF 70.120.05 806355 EFA12F4 Eaton 1.625 X 9.19 KF ST-100-2 KF ST70-6 KF 50.120.05 KF K122E K F 70.122.05 328344, 823078 E1200I/W, E1320I/W Eaton 1.794 X 9.05 KF ST-100-2 KF ST70-7 KF 50.122.05 KF K147E K F 70.147.05 328347, 328349 E1202I/W, E1322I/W, E1462I/W Eaton 1.872 X 9.05 KF ST-100-4 KF ST70-23 KF 50.147.05 KF K180E K F 70.180.05 811525, 328432 EFA18F4, EFA20F4 Eaton 1.872 X 9.97 KF ST-100-4 KF ST70-23 KF 50.180.05 KF K76F KF 70.076.06 E9HZ-3111C Ford 1.430 x 8.25 KF ST-100-2 KF ST70-9 KF 50.076.06 KF K942F KF 70.942.06 E9HZ-3111A Ford 1.794 x 10.07 KF ST-100-2 KF ST70-7 KF 50.942.06 KF K110G - 12540329, 15619561 FL2, FS7 GMC 1.889 x 9.20 KF ST-100-4 - KF 460.268B KF K120G - 12540330 FH0, FL3, FSD GMC 1.889 x 9.62 KF ST-100-4 - KF 460.492B KF K70G KF 70.070.07 3838390, 3927943 F070 GMC 1.249 x 7.87 KF ST-100-2 KF ST70-1 KF 50.070.07 KF K80G - 12540328 FL1 GMC 1.614 x 8.00 KF ST-100-4 - KF 460.266B KF K56G KF 70.056.07 12472161 F050 1986 & NEWER GMC/Chevy 1.179 X 6.36 KF ST-100-2 KF ST70-4 KF 50.056.07 KF K120I K F 70.120.09 1668411C91, 120KK100 02ADD, 02ADG, 02ADN, 02ADP International 1.921 X 9.87 KF ST-100-2 KF ST70-19 KF 50.120.09 KF K102I K F 70.102.09 166027C91, 101KK111 02ADA, 02ADB, 02AEM BEFORE 10/2002 International 1.359 X 7.97 KF ST-100-2 KF ST70-2 KF 50.102.09 KF K140I KF 70.140.09 588808C91 FA-339 1981 & NEWER International 1.609 x 9.66 KF ST-100-2 KF ST70-5 KF 50.140.09 KF K69Z KF 70.069.26 5-87831608-1, 977238DZ, 98441181, 5-87832211-1 NPR model post 98 ISUZU 1.181 x 7.38 - - KF 50.069.26 KF K533M K F 70.533.13 301SQ47 FA523, FA532 Mack 1.625 X 7.46 KF ST-100-2 KF ST70-6 KF 50.533.13 KF K616M KF 70.616.13 301SQ52 FA-616, FA-617 Mack 2.125 x 8.75 KF ST-100-2 KF ST70-18 KF 50.616.13 KF K536M - 301SQ53 Mack - FLX12, 14.6, 18, 20, 23 Volvo - FM9, FM12 Mack/Volvo 2.441 x 8.92 Special Tool to Remove KF ST90-1 KF 460.542N KF K180R KF 70.180.18 R201475 MFS161015, MFS16122A, MFS16143A Rockwell 1.999 x 11.21 KF ST-100-2 KF ST70-12 KF 50.180.18 KF K181R KF 70.181.18 R201476 18000# MFS-18133A,16133A Rockwell 1.999 x 11.21 KF ST-100-2 KF ST70-12 KF 50.181.18 QWIK KIT: THE “TRUE” NO-REAM King Pin Kit The STEMCO Kaiser Qwik Kit is easy to install, easy to maintain, and gives you three to four times the life of conventional bronze or nylon kits. STEMCO Kaiser QWIK KIT ™ For Longer Life And Less Maintenance • 300% More Grease! • Grooved Pin Allows Grease To Lubricate Bearing! • Drive Past Your Next 3 King Pin Jobs! • Install in Half The Time with Half The Effort! • No Ream Installation! CATALOG NUMBER 38 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ NEW PLUS KITS! part numbers continued on back... Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Stemco Kaiser Qwik Kits MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 SPRING PINS SPRING PIN # QWIK KIT BUSHING # LUBRAFLEX BUSHING # APPLICATION OEM PIN # PIN SIZE BUSHING SIZE INSTALL TOOL KF BSP10-8 KF BSA100-2 KF BSL100-2 Ford E5HZ-5780B 1 X 6.42 1.25 X 4 KF ST1000-1 KF BSP12-17 KF BSA120-9 KF BSL120-9 Bluebird 00051758 1.25 X 6.25 1.50 X 4 KF ST1250-1 KF BSP24-2 KF BSL110-4 Volvo 3082276, 3974787, 37121-0001 1.12 X 7 1.37 X 4 KF ST1125-1 KF BSP38-2 KF BSA120-9 KF BSL120-9 Freightliner 16-12373 1.25 X 6.88 1.50 X 4 KF ST1250-1 KF BSP49-1 KF BSA120-9 KF BSL120-9 International / Navistar 3511254C1, 1661976C3 1.25 X 6.50 1.50 X 4 KF ST1250-1 KF BSP50-1 KF BSA120-9 KF BSL120-9 Peterbilt 02-1781, 02-1767 1.25 X 6.85 1.50 X 4 KF ST1250-1 KF BSP50-2 KF BSA120-9 KF BSL120-9 Sterling F7HZ-5780DB 1.25 X 6.66 1.50 X 4 KF ST1250-1 KF BSP55-1 KF BSA120-9 KF BSL120-9 International / Navistar 1671766C1 1.25 X 5.56 1.50 X 3 KF ST1250-1 KF BSP67-1 KF BSG0026-1 Kenworth / International 6262, 688953R1 1.37 X 7.37 1.765 X 4 N/A Threaded KF BSP70-1 KF BSG0068-1 Kenworth 5296 1.37 X 7.37 1.75 X 4 N/A Threaded KF BSP71-1 KF BSG0068-1 International / Navistar 507203C1 1.37 X 7.37 1.75 X 4 N/A Threaded KF BSP83-1 KF BSG0078-1 Volvo 1614230, 1075723 1.31 X 7.03 1.77 X 4.12 N/A Threaded TAG AXLE KING PINS Great solution for Steerable Tag Axle King Pin Jobs Including axles by: Westport, Watson Chalin, McNelius, Hendrickson & More! STEERABLE AUXILIARY AXLES These are the most common kits and their cross-reference information: OEM MODEL CAPACITY OEM KIT NUMBER QWIK KIT PLUS KIT NOTES Watson Chalin SL-1153TT 13,200 SRK102 KF K961L KF 70.961.12 TT Stands for Tru Track SL-1100SR 12,000 N/A KF K981R KF 70.981.18 Unitized Hub SL-1800SR 20,000 N/A KF KH931L KF 70.931.12 McNelius 188033 KF K126W KF 70.126.23 Westport F3W 13,000 143698-0051 KF K126W KF 70.126.23 Sealed Style Axle 14,000 143698-0052 KF K127W KF 70.127.23 Sealed Style Axle 16,000 143698-0052 KF K127W KF 70.127.23 Sealed Style Axle F6W 13,000 143698-0052 KF K127W KF 70.127.23 Sealed Style Axle 14,000 143698-0052 KF K127W KF 70.127.23 Sealed Style Axle 16,000 143698-0052 KF K127W KF 70.127.23 Sealed Style Axle Hendrickson USP 001434 KF K127W KF 70.127.23 UC2 & US2 13,000 003270 & 003200 KF K120H - Cryogenically Frozen In King Pin design! June 21, 2019 (38Stemco Kaiser Qwik Kits) QWIK KIT PLUS KIT OEM KIT # AXLE CODE APP. OE PIN SPEC BUSHING INSTALL TOOL LIP SEAL INSTALL TOOL ECONOMY KIT KF K70R KF 70.070.18 R201479 MFS07 Rockwell 1.499 x 7.15 KF ST-100-2 KF ST70-28 KF 50.070.18 KF K80R KF 70.080.18 R201474 MFS08 Rockwell 1.500 X 7.50 KF ST-100-2 KF ST70-28 KF 50.080.18 KF K931L K F 70.931.12 R201307 FF931, FF941 Rockwell 1.794 X 10.40 KF ST-100-2 KF ST70-7 KF 50.931.12 KF K941R K F 70.941.18 R201318 FC941 Rockwell 1.500 X 8.93 KF ST-100-2 KF ST70-28 KF 50.941.18 KF K961L K F 70.961.12 R201315 FF961, FF941 Rockwell 1.794 X 10.40 KF ST-100-2 KF ST70-7 KF 50.961.12 KF K981R K F 70.981.18 R201472 FF981 Rockwell 1.794 X 8.87 KF ST-100-2 KF ST70-7 KF 50.981.18 KF KG931R KF 70.931.18 R201319, R201425 FG931 Rockwell 1.794 X 10.40 KF ST-100-2 KF ST70-7 KF 50.931.18 KF KH931L K F 78.931.12 R201312 FL931 Rockwell 1.999 X 11.21 KF ST-100-2 KF ST70-12 KF 58.931.12 KF K146E KF 70.146.05 824530/824920 14600# E1460I/W Spicer 1.872 x 9.05 KF ST-100-4 KF ST70-23 KF 50.146.05 KF K160S KF 70.160.19 220KK100 02ADH, 02AEU, 02AEW, 02ADJ, 02ADK, 02AEV Spicer 2.046 x 11.00 KF ST-100-2 KF ST70-24 KF 50.160.19 KF K122V - 3130711 VF10, VF12, VF12.5, FAX5.5, FAX5.7 Volvo 1.777 x 8.62 KF ST-100-4 - KF 460.255 KF K127W KF 70.127.23 143698-0001 F3W-1300, F3W-1400, F3W-1600, F6W-1300, F6W-1400, F6W-1600 all with screw in caps Westport 1.810 x 10.56 KF ST-100-2 KF ST70-33 KF 50.127.23 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

37Innotech Cleaning Tools 10" “ALL SIDED” QUAD HEAD BRUSH CF 93111 CATALOG NUMBER 37 www.midwestwheel.com Order NLINE ™ www.midwestwheel.com Order NLINE ™ UNIVERSAL WASH BRUSH INNTB-1002 WHEEL & RIM BRUSH INNWR-2020 The Block is made of UHMW Polyethylene with a standard broom handle thread. The block is fully filled with split tipped Polyester fiber which is durable & resistant to most chemicals. Dimensions : 8" Dia x 5.5" Ht 10" BI-LEVEL WASH BRUSH HEAD AUT579.WBH10B 10" VEHICLE WASH BRUSH BLACK/WHITE SPLIT TIP POLYSTYRENE HD Block with Bumper & Flow Thru Threaded Handle Hole INNWT-3515 10" ECONOMY VEHICLE WASH BRUSH, GREY SPLIT TIP FIBER HD Block with Bumper & Flow Thru Threaded Handle Hole INNWT-3215 20" FENDER BRUSH, CRIMP SOFT SPLIT TIP POLYSTYRENE INNSB-9815 EXHAUST STACK BRUSH TAMPICO FIBER INNES-4166 CLEANING TOOLS Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 37Innotech Cleaning Tools TIRE GLOSS NA 8020 (13 oz. ) Leaving a dark, rich satin gloss shine, this tire dressing helps prevent fading while weatherproofing and restoring at the same time. SLICK MIST TIRE AND TRIM SHINE LUC10513 (24 oz.) ▪ Great for Cars, Trucks, Boats, and Airplanes ▪ Shines and Protects in One Easy Application ▪ Water Based ▪ Sling Resistant ▪ Quick and Easy, Long Lasting ▪ UV Resistant ▪ Prevents side-wall blowout METAL POLISH LUC10155 (16 oz. ) SLICK MIST SPEED WAX LUC10160 (24 oz. ) ▪ Polishes and cleans all metals (Aluminum, chrome, magnesium, stainless steel, silver, brass, gold) ▪ Easy to use and safe for all metals ▪ No acids or ammonia ▪ Premium Paint Gloss Intensifier ▪ Great for Cars, Trucks, Boats, and Airplanes ▪ Shines and Protects in One Easy Application ▪ Excellent Results on Chrome, Glass and Vinyl Decals ▪ Use on Wet or Dry Surfaces ▪ Quick and Easy ▪ Ease of Application • 8" head with 20" handle • EPDM blade, nylon net, & a heavy duty sponge • Permea-net locking system • Plastic side guard protects glass & vehicle PROFESSIONAL SERIES WOOD HANDLE SQUEEGEE CF 9057 while qty lasts WAX & SHINE PLZSW753 (16 oz.) ▪ Specially formulated with Carnauba Wax which creates a rich, lustrous shine as it helps prevent finish oxidation ▪ Provides maximum gloss, durability & longevity ▪ Contains DuPont Zonyl ® for extended protection and easier removal of bugs MA 05140 Original PowerBall ® MA 05147 PowerBall 4Paint ® POWERBALL ™ POWERCONE ™ MA 05146 PowerCone ® makes quick work of any uncoated, polishable metal finish, no matter how intricate the design. Its ingenious conical shape provides an infinite range of sizes - ideal for getting into tight, difficult-to-reach areas. And the PowerCone’s ® long tapered side is perfect for polishing broad, curved surfaces. FIBERGLASS EXTENSION POLES METAL TIPPED THREADED HARDWOOD HANDLE INNHA-1160 60” X 15/16” REPLACEMENT THREADED TIP FOR EXTENSION POLES INNMT-4010 INNHA-2508 4 ft. - 6 ft. INNHA-2512 6 ft. - 12 ft. FOAMING WHEEL & TIRE CLEANER MA 05924 (24 oz.) PRO-STRENGTH CHROME WHEEL CLEANER MA 05824 (24 oz.) MA 05141 PowerBall Mini ™ Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

37AFF Workbenches and Vice CATALOG NUMBER 37 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ HEAVY-DUTY WORKBENCHES are made of rolled edge steel (for safety) and are powder coated to resist scratches, chips and rust. Each has sturdy 10-gauge steel worktops that can handle the weight of even the heaviest parts and assemblies. Bolt-down feet for added safety. Thick wall rectangular tubular legs create the sturdiest bench on the market. Ships in wooden crate. HEAVY-DUTY WORKBENCHES P/N AFF990 P/N AFF992 • 10-gauge rolled edge steel work top with 2" retaining wall on sides and back (1750 lb. load capacity) • Two 12-gauge steel shelves each with a 550 lb. load capacity • Length - 79”, Width 25”, Height 34-1/2”, Ship Weight 209 lbs • 10-gauge rolled edge steel work top with 2” retaining wall on sides and back (1750 lb. load capacity) • Two key-lock steel drawers with full- extension, ball-bearing slides • One 12-gauge steel shelf with a 550 lb. load capacity • Length 59”, Width 251/4”, Height 34-1/2” Ship Weight 236lbs TECHNICIAN WORK BENCH WITH DRAWERS TECHNICIAN WORK BENCH WITH SHELVES Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 37AFF Workbenches and Vice MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 October 30, 2018 (37AFF Workbenches and Vice) P/N AFF994 P/N AFF3948 • Fluids drain through table top into a removable plastic container (included) • Comes with locking storage drawer on ball bearing slides • Multiple shelf locations give added versatility • Square tube leg design gives added strength and stability to table top • Large 4” heavy-duty swivel casters (2 locking) • Table top features 1/2” rim • Extra heavy-duty construction • Capacity 1,000lbs. • 47”W x 31-1/2”D x 39-3/4”H Shipping weight 249lbs. • Replaceable Hardened Steel Serrated Jaws • Built in pipe jaws 3” capacity • 6” maximum opening HEAVY-DUTY TEARDOWN TABLE 6” HEAVY DUTY SWIVEL BENCH VISE P/N Capacity (Tons) Lift AFF3502 2 4" AFF3504 4 4-1/4" AFF3506 6 5-1/4" AFF3508 8 5" AFF3512 12 5-3/4" AFF3514 12 4" AFF3520 20 6-3/8" AFF3522 20 4-1/4" Bottle Jacks CAN BE USED IN EITHER VERTICAL OR HORIZONTAL POSITIONS *Sold individually P/N Capacity (Tons) Adjusts From AFF3303 3 11-1/2" to 17" AFF3306 6 15-1/2" to 23-3/4" AFF3312B 12 17-3/4" to 28-1/2" AFF3314* 20 12" - 20" Jack Stands SOLD PER PAIR AFF3303 AFF3314 • 4” Throat Depth • Large anvil surface • 360° Swivel Base with 2 locking handles • Shipping Weight: 66 lbs. Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

38Continental ContiTech and Prime Ride Air Springs Continental and Midwest Wheel offer air springs for the aftermarket together under the umbrella of ContiTech Air Spring Systems – the ContiTech premium brand in original equipment quality and the PRIME-RIDE air spring. You benefit from: ▪ Many years of worldwide development excellence and experience for OEMs and the aftermarket ▪ Continual expansion of the product range ▪ High production capacities ▪ Reliable availability of all products – today and in the future ContiTech 100% OE Quality The ContiTech premium brand brings together our pooled expertise as a development partner to, and OEM for, the major companies worldwide. ContiTech air springs are specially developed as original equipment. The brand therefore guarantees the ultimate in quality criteria and meets the stringent requirements of vehicle manufacturers in the international aftermarket. The ContiTech premium brand offers you: ▪ 100 % OE quality ▪ Global availability ▪ Complete OEM range ▪ Precisely configured suspension characteristics ▪ Maximum service life ▪ Maximum load capacity ▪ Simple and precise fitting Certified quality Our product quality and all our processes are regularly audited and certified by our OEM customers. Certifications to EN ISO 9001, VDA 6.1 and EN 14001 confirm, moreover, that our process capability measures up to the high demands an automotive supplier must fulfill. See backside for PRIME-RIDE ® Air Spring CATALOG NUMBER 38 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 38Continental ContiTech and Prime Ride Air Springs MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 April 15, 2019 (38Continental ContiTech and Prime Ride Air Springs) The app for your smartphone ▪ Product information ▪ Cross-reference ▪ Technical drawings ▪ Application guide For iOS and Android www.airspringapp.com Online catalog: www.contitech.de/catalogs/asrepcatalogct/?lang=en-US PRIME–RIDE PRIME-RIDE ® has been an established brand for commercial vehicle air springs with an attractive price/performance ratio since 1998. The PRIME-RIDE offers you: ▪ High quality ▪ Excellent availability (ex stock) ▪ The major commercial vehicle applications ▪ Balanced suspension characteristics ▪ Effective service life ▪ Good load capacity ▪ Simple and precise fitting Certified quality Our product quality and all our processes are regularly audited and certified by our OEM customers. Certifications to EN ISO 9001, VDA 6.1 and EN 14001 confirm, moreover, that our process capability measures up to the high demands an automotive supplier must fulfill. Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==