39Tire Supply Valve Tool & Accessories ............................... 2-3 Air Gauges, Stem & Tire Tools, Air Chucks Valve Accessories ........................................... 3-4 Couplers & Nipples, Valve Cores, Valve Adapters, Valve Caps, Etc. Valve Stems ......................................................... 5 HD Tubeless Tire Valves, H.D. Truck Valves, Aluminium Valve Stems, Etc. Wheel & Tire Chemicals/Lubes/Sealants ......... 6 STS Tire Sealant, Tire Lubricant, Chemicals Tire Inflation ........................................................ 6 Nitrogen Inflation Systems Tire Repair ........................................................... 7 Tube Repairs, Radial Repairs, Uni-Seal Repairs and Stems, Permacure Repairs, Etc. Wheel Weights ................................................. 8-9 Passenger Car & Light Truck, Medium & Heavy Duty Trucks, Non-Lead Tools & Equipment ...................................... 10-14 Wheel & Tire Balancing, Tire Guards ........ 14-15 Centramatic, Equal ® , Wheel Check, Wheel Saver, Wheel-Guard Separator Plates, TRU-BALANCE Wheel Centering Products ......................... 16-18 TPMS Diagnostic Tools with Intellisens Universal Sensors ................. 19 Air Tools ....................................................... 19-20 Ingersoll Rand ® CATALOG NUMBER 39 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ TIRE SUPPLIES & EQUIPMENT Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 2 VALVE TOOL & ACCESSORIES SC CH-305 Made from hex steel SC CH-360 - Closed SC CH-360OP - Open HL H-4660A SC CH-315 Metal dome valve cap Securely locks onto valve when sleeve is pushed forward, releases when sleeve is pulled back. Has 1/4” NPT female thread. Ball Foot Air Chucks 3/4” European-Style Air Chuck Clip-On Air Chuck Easy Lock Air Chucks HL ES-305 12” Easy Lock Extended Air Chuck, Straight (Closed) Standard Bore Core Tool SC TL-620 Used for inserting & removing valve cores Digital Air Gauges Inflating Gauge • 0-160 Operating Range • .5 Increments (PSI) Std. Bore 4-Way Valve Tool SC TL-610 For repairing, inserting and removing valve cores Standard and Large Bore Core Installation Tool SC TL-685 Made from hex steel Std. Bore Valve Core Tool SC TL-635 Valve Stem Installation Tool SC TL-665 HL GA-135S-1 HL GA-155S-1 HL GA-115-1 Service Gauges Valve Cap Tool SC TL-633 Makes it easy to remove & install valve caps on inside dual wheels Valve Finishing Tool SC TL-645 Combines valve core wrench & deflating pin with flexible cable for fishing valve through rim hole Finishing Tool SC TL-650 Guides, aligns, & holds valve through valve hole while mounting tire Screws over valve threads & quickly installs valve into valve hole by applying pulling pressure HL GA-850-330 Std. Bore Air Gauge w/ CH-330 Dual Foot Air Chuck HL GA-850-350 Std. Bore Air Gauge w/ CH-350 Dual Foot Air Chuck SC I-405-3LOM 3 ft. hose, 1/4” female NPT inlet with CH-330-LO lock-on air chuck SC I-406M 12 in. hose and CH-335 dual foot air chuck to service small diameter wheels DUAL FOOT TRUCK SERVICE GAUGE P/N Bar Chuck Style Finish HL GA-135S-1 Metal Angled Chuck Chrome HL GA-155-1 Nylon Straight-on 30˚ Reverse Chrome HL GA-155S-1 Metal Straight-on 30˚ Reverse Chrome HL GA-155SG Metal with Grip Straight-on 30˚ Reverse Chrome HL GA-165 Nylon Straight-on 30˚ Reverse Black Polyurethane HL GA-185SG Metal with Grip Straight-on 180˚ Reverse Chrome DUAL FOOT TRUCK HIGH-PRESSURE GAUGE SC GA-150-1 Nylon Straight-on 30˚ Reverse Chrome Pencil Tire Gauges HL GA-146-1 20-90 PSI (1 PSI Increments) HL GA-115-1 20-120 PSI (2 PSI Increments) Air Gauges Stem & Tire Tools Air Chucks VALVECAPPER ® PRO 4 TOOLS IN 1: Cap and Core Remover/Installer KT 29999 • Holds onto caps and valve cores for removing and replacing • Longer valve cap grip works on flow-through, double seal valve caps • 11-3/4 inches Tire Tread Depth Gauge HL GA-190-1 Core Removing & Inflation Tool HL IN-20 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 3 SC CH-335 Dual foot for hard-to-reach tractor, dual wheel trucks & bus tires. SC CH-333-LO 12” Straight-on 30˚ reverse angle chuck SC CH-350-LO With black polyurethane coating SC CH-330-LO 6” Straight-on 30˚ reverse angle chuck Dual Foot Air Chuck Dual Foot Lock-On Air Chucks SC CH-370-LO Straight-on 180˚ reverse angle chuck Air Chucks, continued VALVE ACCESSORIES SC NI-204 SC CO-201 Couplers & Nipples Haltec # Desc. NPT Thread Schrader Type Milton Industrial Type SC NI-202 Nipple 1/4” Male 5138-11 727 SC CO-301 Coupler 1/4” Female 5138-12 - SC NI-204 Nipple 1/4” Female 5139-11 728 SC CO-303 Coupler 1/4” Male 5139-12 - SC CO-201 Coupler 1/4” Female 5142-12 715 SC CO-204 Coupler 3/8” Female 3541 1835 SC NI-206 Nipple 3/8” Male 3542 1837 SC NI-208 Nipple 3/8” Female 3543 1838 Lincoln Type SC CO-701 Coupler 1/4” Female 3528 790 SC NI-702 Nipple 1/4” Male 3531 791 SC NI-704 Nipple 1/4” Female 3532 792 Aro Type SC CO-501 Coupler 1/4” Female 3526 775 SC NI-502 Nipple 1/4” Male 3529 777 SC NI-504 Nipple 1/4” Female 3530 778 Tru-Flate Type SC CO-105 Coupler 1/4” Female 3505 - SC NI-102 Nipple 1/4” Male 3506 783 HL NI-104 Nipple 1/4” Female 3507 784 SC NI-110 Nipple 3/8” Female 3518 1808 SC CO-109 Coupler 3/8” Female 3516 1805 SC NI-108 Nipple 3/8” Male 3517 1807 SC CO-107 Coupler 3/8” Male 3515 1806 SC CO-111 Coupler 1/2” Female 3512 1815 HL CO-112 Coupler 1/2” Male - - SC NI-112 Nipple 1/2” Male 3513 1817 HL NI-113 Nipple 1/2” Female - 1858 Valve Cores SC A-100-VC-1 Heat resistant core for big trucks SC A-100-VC-3 Metal Screwdriver Valve Cap for Removing Valve Cores Valve Caps HL DS-1 Double Seal Valve Cap HL DS-1G Double Seal Valve Cap (Green) SC A-100-VC-8 Plastic Dome Valve Cap HL A-100-VC-8G Plastic Green Dome Valve Cap SC N-1202 Chrome-Plated Hex Cap SC A-148 Screwdriver Valve Cap, Fits .482-26 Valve Threads. HL A-149 Hex Valve Cap for easy tightening and removing with wrench. Fits .482-26 Valve Cap HL DS-1 SC TV-CH-3 Core Housing Fits all fast flow air-liquid valves except super large bore Valve Adapters SC AD-1 SC 8807N-4 SC AD-1 Fits .305-32 valve core threads SC 8807N-4 Fits .485-26 valve cap threads Adapts large bore valve down to standard bore. 5-in-1 Universal Safety Exhaust Quick-Connect Industrial Coupler • Connects to ALL major interchanges: Industrial (M-Style), High Flow (V-Style), Automotive (T-style), ARO (A-Style), Lincoln (L-style) • Durable steel construction • Safely bleeds off air pressure before releasing connector • Easy, automatic one-hand connection MIL1750BK 1/4” Female NPT MIL1751BK 1/4” Male NPT SC CH-330 Straight-on 30° reverse angle chuck. Has 1/4” NPT female thread. 6” long. High-Pressure Inflating Connection SC H-556 Fits .305-32 thread size with 1/8" NPT male connection. Has core depressor pin, and copper sealing washer. Maximum working pressure 3000 PSI. Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 4 SC G-172 SC G-550 O-Rings for Tubeless Tires Grommets, O-Rings, Bushings SC B-6 Bushing - Fits over TR-13 tube valve when used in 5/8” valve hole O-RING TIRE TYPE RIM SIZE ROD DIAMETER HL OR-224-TG Standard Grader 24” 0.26 HL OR-225-T Standard Grader 25" 0.26 HL OR-25-T Standard Earthmover 25” 0.26 HL OR-325-T Standard Earthmover 25” 0.385 HL OR-20-JMA Arctic Highway (JM Rim) 20” 0.26 SC O-330L O-ring for TV-540 series Grommets P/N Fits Temp. Rating Used On HL 5976-5 .453 Valve Hole -60 - 250° F TV-416, 416L, 6008 HL 5976-6 .625 Valve Hole -60 - 250° F TV-416, 416L SC G-172 .625 Valve Hole -60 - 250° F TV-509, 510, 511 SC G-170 .625 Valve Hole -60 - 250° F TV-500 Series, TV-570” Series SC G-550 .975 Valve Hole -20 - 400° F Viton - Fits TV-550 Series VALVE ACCESSORIES Valve Extension Alcoa Stabilizers P/N Fits Alcoa Wheel Size Diameter Hand Hole Hole Position HL H-2225 22.5" 2.00" Center HL H-2227 22.5" 2.50" Center Heavy Duty Metal Valve Extensions Extensions P/N Collar Type Effective Length SC HE-381 Long Collar 1" 3-1/16" SC HE-382 Long Collar 1" 5-1/16" SC HE-383 Long Collar 1" 6-1/16" HL HE-391 Long Collar 1" - Lightweight 2-15/16" HL HE-393A Long Collar 1" - Extremely Lightweight Aluminum 6" SC HE-370 Short Collar 3/8" - Lightweight 2" This extension provides easy access to the inner dual tire found on campers, recreational vehicles and light trucks. Fits standard valve cap threads. Comes with clamp to secure extension to wheel cut-out. 2 extensions per pack. Rubber - Dual Wheel Flexible Valve Extensions Metal Braided - Dual Wheel Flexible Valve Extensions AIR-FLEXX Valve Extension Flexible Extensions SC FE-300-7 Length: 7” SC FE-300-9 Length: 9” SC FE-300-11 Length: 11” SC SFE-400-7 Length: 7” SC SFE-400-10 Length: 10” HL HE-343 145mm length HL HE-345 215mm length Pressureless, Unbreakable, Flexible HL 5976-5 1” Drive Wheel Service Set P/N GN 9007 7 Piece Set Contents: 4813S 13/16” Square 4038S 1-3/16” (30mm) Std. 4034DT 1-1/16” TW Deep 4036DT 1-1/8” TW Deep 4040DT 1-1/4” TW Deep 4033MD 33mm Deep 4048D 1-1/2” (38mm) Deep Molded storage case 1” Drive Wheel Service Set P/N GN 9151 10 Piece Set Contents: 81010R 3/16” Square 81026R 1-1/2” Deep 81012R 15/16” Square 81028R 1-3/4” Deep 81014R 1” Deep 81030R 1-1/8” T.W. Deep 81016R 33mm Deep 81018R 1-1/16” T.W. Deep 81022R 1-3/16” Deep 81024R 1-1/4” T.W. Deep Molded storage case Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 5 VALVE STEMS Model Length Valve Hole SC TV-500 2” .625 SC TV-501A 1-1/2” .625 SC TV-570A 3-1/8” .625 SC TV-571A 3-3/8” .625 SC TV-572A 3-3/4” .625 SC TV-573A 4-3/8” .625 HL TV-572F19 3-3/4” .625 SC TV-574 5” .625 SC TV-575-HP 1” .453 or .625 HL N-1600 1-7/16” .453 HL TV-416MC 1-3/4” .453 SC TV-602HP HL TV-600-HPA SC TV-413 SC TV-413CH 90˚ Angle Heavy Duty Truck Valve Stems for Aluminum Truck Wheels O-ring Seal Valves for Aluminum Truck Wheels (9.7 mm Valve Hole) SC TV542 Length: 4.75” Valve Hole - .625” SC TV-509 Length: 5.5” Valve Hole - .625” SC TV-510 • Longer sealing life • Greater corrosion resistance • Larger sealing surface • Hex recess in base for easier installation • *Viton ™ replacement grommet - G-550 • Grommet has better temperature range & tear resistance SC TV-553D #O-330L, O-Ring (TR-540 Series Valves) Heavy Duty Truck Valves TV-500 TV-572F19 For use on Accu-Lite ™ Steel Wheels SC TV-6008C Chrome Finish Length: 9/16” Valve Hole: .453” or .625” Tractor Front Wheel Valve SC TV-6008 Brass Finish Length: 9/16” Valve Hole: .453” or .625” 23˚ bend clamp-down valve for .625 valve hole. Bend allows clearance of brake drum for tire service Some imported trucks will have steel wheels that incorporate the 9.7mm valve hole (.390”). These are the most popular valves for this application. HL N-1147A SC 60 MS-27 Radial Commander Valve for 15” Disc Wheels Metric Rim Hole Valve (9.7mm Valve Hole) Model Length Valve Hole SC TV-413 1-1/4” .453 SC TV-412 7/8” .453 SC TV-414 1-1/2” .453 SC TV-415 1-1/4” .625 SC TV-416 1-1/4” .453 or .625 SC TV-418 2” .453 SC TV-423 2-1/2” .453 SC TV-575A 1-1/8” .625 Chrome SC TV-413CH 1-1/4” .453 HL TV-418-CH 2” .453 High Pressure HL TV-600-HPA 1-1/4” .453 SC TV-602-HP 2” .453 SC TV-801-HP 1-1/4” .625 UPGRADED STANDARD Aluminum Valve Stems Heavy Duty Tubeless Tire Valves Grommet Seal Valves for Alcoa Truck Wheels (9.7 mm Valve Hole) Air Liquid Valves for Tractor & Road Grader Service SC TV-618A Length: 1-7/8” Valve Hole: .625” SC TV-618A-SS Length: 1-7/8” Valve Hole: .625” Einky Valves P/N Bend Angle Effec. Length Valve Hole SC TV-6010 Str. 3/4” .453 Tank Valves P/N OAL Base Th. Hex Sz. SC TV-399 1-5/16” 1/8” NPT 7/16” SC TV-400 1-5-16” 1/4” NPT 9/16” SC TV-401 27/32” 1/8” NPT 7/16” Used to seal 5/8” rim hole when relocating valve SC N-1012S Rim Hole Plug P/N HEIGHT ANGLE LENGTH SC TV-542 1.25” - - SC TV-543 2.4” - - SC TV-543D 0.98” 60˚ 1.38” SC TV-543E 0.98” 75˚ 1.38” SC TV-544 2.9” - - SC TV-545 3.5” - - SC TV-545D 0.98” 60˚ 2.6” SC TV-546D 0.98” 60˚ 3.35” SC TV-546-36 0.98” 36˚ 3.35” P/N HEIGHT ANGLE LENGTH SC TV-552 1.26” - - SC TV-553 2.4” - - HL TV-553C .93” 45˚ 1.43” SC TV-553D .98” 60˚ 1.38” SC TV-553E .98” 75˚ 1.38” SC TV-554D .98” 60˚ 1.94” SC TV-555D .98” 60˚ 2.6” SC TV-618A SC TV-618A-SS Stainless Steel Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 6 WHEEL & TIRE CHEMICALS/LUBES/SEALANTS P/N Description Size IS STSCS24-16 OTR Tire Sealant 16 Oz. IS STSOTRCS4128 OTR Tire Sealant 1 Gal. IS STSOTR640 OTR Tire Sealant 5 Gal. IS 42027 ECO Seal 5 Gal. STS Tire Sealant JT 2005 JT 2020 KT T147A FR 4-1 IS ALCS4128 TE 720 P/N Description JT 2000 Murphy’s Concentrated Formula 8 lb. Pail (4 per case) JT 2005 Murphy’s Concentrated Formula 25 lb. Pail w/ Swab JT 2020 Murphy’s Liquid Formula 1 gal. JT 2023 Murphy’s Liquid Formula 5 gal. FR 4-1 Freylube No Rim Rust Compound 4.5 lb. Pail FR 25 LB Freylube No Rim Rust Compound 25 lb. Pail IS ALCS4128 Air-Lock Tire Lube & Bead Seal 1 gal. KT T147A BeadEze G0 GA6035 Super Slick-Em, 1 gal. JT 2022 Murphy’s Tire Lube, 55 gal. TE 720 Rim Ease Mounting Lubricant, 1 gal. TE 720-5 RRim Ease Mounting Lubricant, 5 gal. TE 720-55G Rim Ease Mounting Lubricant, 55 gal. Tire Lubricant TIRE INFLATION TE 760 Vulcanizing Fluids Rub-O-Matic TE 704 1 Quart TE 704A Aerosol P/N Description TE 760 8 oz. Chem. Vulcanizing Fluid TE 761 1 qt. Chem. Vulcanizing Fluid TE 770 7 oz. Flow-Seal Vulc. Fluid Chemicals TE 738G TE 735 KT D105A Concentrated formula dilutes with water TE 706-1 1# Shaker Container Deteco Mist Air Leak Locator Talc Tire P/N Description TE 734 Bead Breaker - 1 gal. TE 735 Bead Sealer 32 oz. can with brush TE 738 Security Coat overbuff inner liner sealant, 16 fl. oz. TE 738G Security Coat, 1 gal. TIRE GLOSS P/N NA 8020 (13 oz.) Leaving a dark, rich satin gloss shine, this tire dressing helps prevent fading while weatherproofing and restoring at the same time. ▪ Shines and protects in one easy application ▪ Water based ▪ Sling resistant SLICK MIST TIRE AND TRIM SHINE P/N LUC10513 (24 oz.) ▪ Quick and easy, long lasting ▪ UV resistant ▪ Prevents side-wall blowout Nitrogen Inflations System Features: • Compliments any nitrogen generator • The mountable inflation system allows any technician to set the pressure, attach the nitrogen hoses & press start • All new nitrogen software will purge the air out of any size tire, re-inflate with nitrogen, maintaining its accuracy of .3psi • Designate the number of purge cycles to guarantee the purity level needed to obtain the benefits of nitrogen inflation over standard air inflation Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 7 TIRE REPAIR P/N Description Qty. TE 10 Mini - Round 1.38" 50 TE 11 Small - Round 1.75" 40 TE 12 Medium - Round 2.25" 30 TE 13 Large - Round 3.13" 20 TE 14 Maxi - Round 4" 20 TE 15 Giant - Round 5" 10 TE 20 Giant Oval - 6-1/4" X 4" 10 Round 2-Way Tube Repairs TE 925T TE 220 TE 222 TE 224 TE 925 TE 215 P/N Description Qty. TE 220 Permacure II 50 TE 222 Permacure 50 TE 224 Truck Permacure 40 TE 925 Passenger Tool 1 TE 925T Truck Tool 1 TE 215 Passenger Kit 1 TE 216 Truck Kit 1 Permacure Repairs TE 250-1 P/N Description Qty. TE 250-1UL 1/8” Stem 20 TE 251-1UL 1/4” Stem 20 TE 291-1UL 3/8” Stem 20 TE 260W Wire Puller for Uni-Seal Stem Uni-Seal Stems TE RH-106 TE RH-102 Rubberhog Buffing Tools P/N Description TE RH-106 2-1/2” Wheel TE RH-102 2” Wheel TE 1-335 TE 1-336 Buffing Wheels P/N Description TE 1-335 Metal Buffing Cone 2” TE 1-336 Metal Buffing Cone 2-1/2” TE 964 TE 915 TE 933 TE 1-151 TE 951W P/N Description Qty. TE 915 Spiral Cement Tool 1 TE 964 Rim Ease Swab 15” TE 931 Wire Buffer for rim/battery terminal 1 TE 933 Rubber Scraper 1 TE S-947 Buffing Stone, 3” x 1¼â€, 46 grit, 3/8” arbor hole, 5,000 rpm max. 1 TE TMR106259 Lube Bucket 1 TE 1-151 Tire Repair Stitcher 1/8” 1 TE 1-186 Markal Paintstik White 12 TE 951W White Paint Crayon 12 TE 951Y Yellow Paint Crayon 12 Tools & Accessories P/N Description Qty. TE 111 Round All Purpose 50 TE 115T 1-3/4” Square 100 TE 116T 2-1/4” Square 80 Universal All-Purpose Repairs P/N Description Qty. TE 164 CT-10HD 10 TE 164T CT-10HD 30 TE 165 CT-10 Dim. 1-3/4” x 3” 20 TE 165T CT-10 Tub 80 TE 167 CT-12 Dim. 2-3/8” x 4-3/8” 10 TE 167T CT-12 Tub 40 TE 169 CT-14 10 TE 170 CT-20 Dim. 3” x 5” 10 TE 177 CT-33 Dim. 4” x 5” 10 TE 185 Dim. 7-3/4” X 9-1/8” TE 196 CT-80 Dim. 6” x 7-3/4” 5 Radial Repairs TE 270 P/N Description Qty. TE 249UL Mini-Uni-Seal 40 TE 250UL 1/8” Repair 14 TE 251UL 1/4” Repair 12 TE 291UL UL10 3/8” 10 TE 270 1/8” Carbide Cutter 1 TE 271 1/4” Carbide Cutter 1 Uni-Seal Repairs TE 291UL P/N Description Qty. TE 601 MP-1 Dim. 3” 20 TE 602 MP-2 Dim. 3-1/2” 10 TE 112 MP-10 Dim. 3” 30 Multi-Purpose Repairs P/N Description Dim. Qty. TE 603 BP-3, 2 Plies 4" 10 TE 604 BP-4, 4 Plies 5-5/16" 10 TE 605 BP-5, 4 Plies 6-1/2" 10 P/N Description Qty. TE 164R CT-10HDR Repair Units 2-1/2" x 3-1/4" 10 Bias Ply Repairs P/N Description Qty. TE 905 Heavy Duty Insert Tool, 9” 1 TE 603 Flow-Seal Inserts Thermacure Nail Hole Repairs Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 8 LEAD QUICKSTIK ® Pre-Taped Weights P1 100360 P1 CL12 P/N Size Pcs./Box P1 100360 .25 oz. segments, 3 oz. per strip 30 P1 300360 .5 oz. segments, 6 oz. per strip 30 P1 CL6 1 oz. segments, 6 oz. per strip 30 P1 CL12 2 oz. segments, 12 oz. per strip 8 “AWN” Series - Coated For Alloy Wheels “AW” Series - Uncoated “LH” Series - Coated For Alloy Wheels P/N Size Pcs./Box P1 P025 1/4 oz. 50 P1 P050 1/2 oz. 50 P1 P075 3/4 oz. 50 P1 P100 1 oz. 50 P1 P125 1-1/4 oz. 50 P1 P150 1-1/2 oz. 50 P1 P175 1-3/4 oz. 50 P1 P200 2 oz. 50 P1 P225 2-1/4 oz. 50 P1 P250 2-1/2 oz. 50 P1 P275 2-3/4 oz. 50 P1 P300 3 oz. 50 P1 P325 3-1/4 oz. 25 P1 P350 3-1/2 oz. 25 P/N Size Pcs./Box P1 P025S 1/4 oz. 25 P1 P050S 1/2 oz. 25 P1 P175S 1-3/4 oz. 25 P/N Size Pcs./Box P1 LH050 1/2 oz. 25 P1 LH075 3/4 oz. 25 P1 LH100 1 oz. 25 P1 LH125 1-1/4 oz. 25 P1 LH175 1-3/4 oz. 25 P/N Size Pcs./Box P1 AW025N 1/4 oz. 25 P1 AW050N 1/2 oz. 25 P1 AW075N 3/4 oz. 25 P1 AW100N 1 oz. 25 P1 AW125N 1-1/4 oz. 25 P1 AW150N 1-1/2 oz. 25 P1 AW175N 1-3/4 oz. 25 P1 AW200N 2 oz. 25 P1 AW250N 2-1/2 oz. 25 P1 AW275N 2-3/4 oz. 25 P1 AW300N 3 oz. 25 P/N Size Pcs./Box P1 AW250 2-1/2 oz. 50 “TN” Series - Coated For Steel/Alloy Wheels P/N Size Pcs./Box P1 T025N 1/4 oz. 25 P1 T050N 1/2 oz. 25 P1 T075N 3/4 oz. 25 P1 T100N 1 oz. 25 P1 T125N 1-1/4 oz. 25 P1 T150N 1-1/2 oz. 25 P1 T175N 1-3/4 oz. 25 P1 T200N 2 oz. 25 P1 T225N 2-1/4 oz. 25 P1 T250N 2-1/2 oz. 25 P1 T275N 2-3/4 oz. 25 P1 T300N 3 oz. 25 P1 T400N 4 oz. 25 P1 T500N 5 oz. 25 “EN” Series - Coated For Alloy Wheels P/N Size Pcs./Box P1 EN015 15 g. 25 P1 EN020 20 g. 25 P1 EN025 25 g. 25 P1 EN030 30 g. 25 P1 EN035 35 g. 25 P1 EN040 40 g. 25 P1 EN050 50 g. 25 WHEEL WEIGHTS Passenger Car & Light Trucks “LT1” Type Truck Weights “I7” Type Truck Weights “MCN” Series - Coated For Alloy Wheels Weights listed are constructed from lead Note: For steel weights add “ST” to the end of the part number. (Remove “N” if applicable) “CT” Type Truck Weights P/N Size Pcs./Box P1 CT200 2 oz. 25 P1 CT-030 3 oz. 25 P1 CT400 4 oz. 25 P1 CT-060 6 oz. 25 P1 CT-080 8 oz. 25 P1 CT-100 10 oz. 20 P1 CT-120 12 oz. 20 P/N Size Pcs./Box P1 I7-020 2 oz. 25 P1 I7-030 3 oz 25 P1 I7-040 4 oz. 25 P1 I7-050 5 oz. 25 P1 I7-060 6 oz. 25 P1 I7-080 8 oz. 25 “TAL” Type Truck Weights P/N Size Pcs./Box P1 TAL200 2 oz. 25 P1 TAL300 3 oz. 25 P1 TAL400 4 oz. 25 P1 TAL600 6 oz. 25 P1 TAL800 8 oz. 25 P/N Size Pcs./Box P1 LT1-005 1/2 oz. 25 P1 LT1-010 1 oz. 25 P1 LT1-020 2 oz. 25 P1 LT1-040 4 oz. 25 P1 LT1-050 5 oz. 25 P/N Size Pcs./Box P1 MC025N 1/4 oz. 25 P1 MC050N 1/2 oz. 25 P1 MC075N 3/4 oz. 25 P1 MC100N 1 oz. 25 P1 MC125N 1-1/4 oz. 25 P1 MC150N 1-1/2 oz. 25 P1 MC175N 1-3/4 oz. 25 P1 MC200N 2 oz. 25 P1 MC225N 2-1/4 oz. 25 P1 MC250N 2-1/2 oz. 25 P1 MC275N 2-3/4 oz. 25 P1 MC300N 3 oz. 25 P1 MC350N 3-1/2 oz. 25 Clip-On Medium & Heavy Duty Trucks P/N Size Pcs./Box P1 FN010 10 g. 25 P1 FN015 15 g. 25 P1 FN020 20 g. 25 P1 FN025 25 g. 25 P1 FN030 30 g. 25 P1 FN035 35 g. 25 P1 FN040 40 g. 25 P1 FN045 45 g. 25 P1 FN050 50 g. 25 P1 FN055 55 g. 25 P1 FN075 75 g. 25 “FN” Series - Coated For Alloy Wheels “IAW” Series Coated For Alloy Wheels P/N Size Pcs./Box P1 IAW010 10 g. 25 P1 IAW020 20 g. 25 P1 IAW025 25 g. 25 P1 IAW030 30 g. 25 P1 IAW035 35 g. 25 Lead Clip-On Installation & Removal Tool P/N P1 25K Open Side Disc Side For Steel Wheels For Steel Wheels For Alloy Wheels For Alloy Wheels “PS” Series - Coated For Steel Wheels “P” Series - Uncoated Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 9 STEEL QUICKSTIK ® NON-LEAD WHEEL WEIGHTS “PZU” Series “TZ” Series Coated *Sold 25 Pieces/Box • **Not Available in Steel “FNZ” Series Coated “LHZ” Series Coated “MCZ” Series Coated “PZ” Series Coated “AWZ” Series Coated “IAWZ” Series Coated P/N Profile Segment Size Strip Size Pcs./Box P1 SST300N Standard 1/4 oz. 3 oz. 25 P1 200624STR Low 1/4 oz. 1,280 segments 20 lb. Roll P1 300360ST Standard 1/2 oz. 6 oz. 30 P1 300360STR Standard 1/2 oz. 640 segments 20 lb. Roll P/N Size P1 P025ZU* * 1/4 oz. P1 P050ZU* * 1/2 oz. P1 P075ZU* * 3/4 oz. P1 P100ZU* * 1 oz. P1 P125ZU* * 1-1/4 oz. P1 P150ZU* * 1-1/2 oz. P1 P175ZU* * 1-3/4 oz. P1 P200ZU* * 2 oz. P1 P225ZU* * 2-1/4 oz. P1 P250ZU* * 2-1/2 oz. P1 P275ZU* * 2-3/4 oz. P1 P300ZU* * 3 oz. P/N Size P1 AW025S 1/4 oz. P1 AW050Z 1/2 oz. P1 AW075Z 3/4 oz. P1 AW100Z 1 oz. P1 AW125Z 1-1/4 oz. P1 AW150Z 1-1/2 oz. P1 AW175Z 1-3/4 oz. P1 AW200Z 2 oz. P1 AW225Z 2-1/4 oz. P1 AW250Z 2-1/2 oz. P1 AW275Z 2-3/4 oz. P1 AW300Z 3 oz. P/N Size P1 MC025S 1/4 oz. P1 MC050Z 1/2 oz. P1 MC075Z 3/4 oz. P1 MC100Z 1 oz. P1 MC125Z 1-1/4 oz. P1 MC150Z 1-1/2 oz. P1 MC175Z 1-3/4 oz. P1 MC200Z 2 oz. P1 MC225Z 2-1/4 oz. P1 MC250Z 2-1/2 oz. P1 MC275Z 2-3/4 oz. P1 MC300Z 3 oz. P/N Size P1 P025Z 1/4 oz. P1 P050Z 1/2 oz. P1 P075Z 3/4 oz. P1 P100Z 1 oz. P1 P125Z 1-1/4 oz. P1 P150Z 1-1/2 oz. P1 P175Z 1-3/4 oz. P1 P200Z 2 oz. P1 P225Z 2-1/4 oz. P1 P250Z 2-1/2 oz. P1 P275Z 2-3/4 oz. P1 P300Z 3 oz. “Z” at end of Part # indicates Zinc, “S” at end of Part # indicates Steel There is a growing concern for the use of lead in wheel weights and the impact lead weights have on the environment. Federal, state, and local governments have taken steps towards the elimination of lead weights in their jurisdictions. The use of lead in wheel weights was banned in Europe in 2003. The primary replacement material in Europe is Zinc. Several states have passed legislation banning the use of lead weights. These states include CA, WA, ME, VT, MA & IL. The US EPA has also accepted a petition to begin rule making than bans lead wheel weights at the federal level. *Sold 25 Pieces/Box • **Not Available in Steel “TALZ” Series P/N Size P1 TALZ-020* * 2 oz. P1 TALZ-040* * 4 oz. P1 TALZ-060* * 6 oz. “I7Z” Series P/N Size P1 I7Z-020* * 2 oz. P1 I7Z-030* * 3 oz. P1 I7Z-040* * 4 oz. P1 I7Z-060* * 6 oz. Non-Lead Passenger Car & Light Trucks Zinc Clip-On Medium & Heavy Duty Trucks P/N Size P1 FN010Z 10 g. P1 FN015Z 15 g. P1 FN020Z 20 g. P1 FN025Z 25 g. P1 FN030Z 30 g. P1 FN035Z 35 g. P1 FN040Z 40 g. P1 FN045Z 45 g. P1 FN050Z 50 g. P1 FN060Z 60 g. P/N Size P1 LH025Z 1/4 oz. P1 LH050Z 1/2 oz. P1 LH075Z 3/4 oz. P1 LH100Z 1 oz. P1 LH125Z 1-1/4 oz. P1 LH150Z 1-1/2 oz. P1 LH175Z 1-3/4 oz. P1 LH200Z 2 oz. P/N Size P1 IAW010Z 10 g. P1 IAW015Z 15 g. P1 IAW020Z 20 g. P1 IAW030Z 30 g. P1 IAW035Z 35 g. P1 IAW040Z 40 g. P1 IAW045Z 45 g. P1 IAW055Z 55 g. P1 IAW060Z 60 g. P/N Size P1 T025S 1/4 oz. P1 T050Z 1/2 oz. P1 T075Z 3/4 oz. P1 T100Z 1 oz. P1 T125Z 1-1/4 oz. P1 T150Z 1-1/2 oz. P1 T175Z 1-3/4 oz. P1 T200Z 2 oz. P1 T225Z 2-1/4 oz. P1 T250Z 2-1/2 oz. P1 T275Z 2-3/4 oz. P1 T300Z 3 oz. Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 10 TOOLS & EQUIPMENT Jacks Value & Efficiency Both models equipped with dual ram return springs Heavy Duty Lifting AFF5512B 12 Tons 6-3/4” Lift AFF5520B 20 Tons 6-1/4” Lift Bottle Jacks AFF Bottle Jacks can be used in either vertical or horizontal positions P/N Capacity Lift AFF3502 2 Tons 4” AFF3504 4 Tons 4-1/4” AFF3506 6 Tons 5-1/4” AFF3506C 6 Tons w/ case 5-1/4” AFF3508 8 Tons 5” AFF3512 12 Tons 5-3/4” AFF3514 12 Tons, short body 4” AFF3520 20 Tons 6-3/8” AFF3522 20 Tons, short body 4-1/4” AFF3530 30 Tons 7-5/8” AFF3550 50 Ton w/one-piece handle 7” • Universal joint technology for precision release valve control • 2 piece 50-1/4” handle for easy maneuverability & storage • 360° swivel casters • Lifting range of 5-3/4” to 18-1/2” • 4” saddle diameter • 21” overall reach • 6-1/2” frame height • 39-1/2” handle length Air Hydraulic Bottle Jack Viking 3-Ton Double-Pumper Floor Jack AFF3003 Stinger 3 Ton Hydraulic Service Jack OT 5303 • Lifts from 4” to 19-1/2” • Pinned steel saddle (1-1/8” stud) with rubber pad for added vehicle protection • Rear mounted 2-3/4” swivel casters for ease of maneuverability • One piece 50-1/4” padded handle parks upright 3 1/2 Ton Heavy-Duty Jack w/ Double Pumper AFF350SS • One pump to load; three pumps to full height unloaded • Extra wide lift range – from 4” to 21” • A long 48” spring-loaded handle provides rapid return after each pump • Heavy-duty construction – rolled edges add strength and resist twisting • With a wheel base of 23”, the front wheels are 3-1/2” diameter and rear casters are 2-1/8” Two-Speed 3-1/2 Ton Service Jack OT 1526A • Low height: 10-3/8 • High height: 20-5/8 • Lift: 6-3/8” • Base footprint: 5-3/4” x 9 • Base thickness: 1-1/8” 20 Ton Super Duty Air/Hyd Bottle Jack AFF5620SD • Operates at 115-200 PSI, 7.8 cubic feet per minute • Long 61” body with 8-1/4” frame height for easier lifting of vehicles with long overhangs • Foot-operated pump for quick lifting efficiency • Automatic overload safety valves • Large, rugged 4-1/2” front wheels and 2-3/4” rear casters 10 Ton Air / Hydraulic Service Jack AFF3135 10-Ton Service Jack OT 1510B • A built-in safety overload prevents using the jack beyond its rated capacity. • Convenient foot pedal speeds the lifting operation • Lifting range: 6-1/4” to 22” • Saddle diameter: 6” • Overall reach: 51” • Frame height: 9-3/4” • Floor space: 18” to 60” Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 11 22-Ton Axle Jack AFF565 E1 • 1 piece handle • Heat treated cylinder wall & chromed piston give added stability & longer jack life • Alloy steel lifting mechanism • Lifts between 8-34” to 23” • In-line filter to protect air motor from contaminants • 10-ton capacity achieved at 200-PSI air supply • Heavy-duty air valve offers accurate lift control • Removable “T” handle for easy storage • Extension tubes offer multiple lifting and locking positions • 12” Lift travel • Large diameter rubber tread wheels • Low height 18” • High height with all extensions used 52” 10 Ton Air Lift Jack AFF3400A 27.5-Ton Under Axle Jack OT 5292 • Versatile, easy-to-use heavy duty under-axle jack that is compact, can fit under many types of vehicles, and handle a wide assortment of vehicles. • Robust design with completely sealed piston • New lever design and pneumatic release valve allows for more precise release control, does not require separate valve operation step • Four position handle includes ‘stow away’ position • Venturi vacuum power return system • Includes two height adapters • ANSI/PALD certified Truck Dual Wheel Dolly OT 1769A • 1,500 capacity • Hydraulic jack provides over 6-1/2” of lift and tilts wheel assembly 7° to prevent damage to wheel seal • Floor space is 43” by 42” • Swivel casters for easy maneuverability • 6’ chain holds load in place • Designed for “one-technician operation” • 8” rollers turn & pivot for accurate & efficient alignment of mounted truck tires with hub studs • Handles wheels up to 24” diameter • 300 lb. capacity Portable Truck Wheel Dolly AFF3590A Large Capacity Truck Wheel Dolly AFF3591 Wheel Dolly • Ideal for 12”-24” outside diameter tire sizes • Lift arms adjust inward and outward to handle different wheel combinations • Leveling screw for precise alignment • Full 7-3/4” ram lift • Six-foot safety chain secures wheels in place during removal and transport • 3 large swivel casters Heavy-Duty Wheel Dolly 1500 Lb AFF3577 Capacity Low Height High Height Length Width 1500 lbs. 2-1/2" 10-1/4" 31" 43" • 14” rollers turn and pivot for accurate & efficient alignment of mounted truck tires with hub stud • 26” wide carriage handles tire diameters 36”- 48” • 450 lb. capacity TOOLS & EQUIPMENT Ratchet-Style Safety Stands P/N Capacity Adjusts from AFF3303 3 Ton (pair) 11-3/4” to 17” AFF3306 6 Ton (pair) 16” to 23-3/4” AFF3312B 12 Ton (pair) 19-1/2” to 28” Pin-Style Safety Stands P/N Capacity Adjusts from AFF3310A 10 Ton 10 positions from 28” to 47” AFF3314 20 Ton 4 positions from 12” to 20” Safety Stands OTC Stinger 6-Ton Jack Stands (Pair) OT 5373 Height range: 15-5/8” to 23-11/16” Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 12 KT T57 KT T95 Lug Wrenches Lug Wrench Telescopic Lug Wrench extends to 22” Wrenches Budd Nut Wrenches Chrome Lug Nut Cover Remover P/N Length Socket Sizes 4-Way Passenger Lug Wrenches - Professional Gold KT T57 23” 3/4", 13/16", 7/8", 15/16" 4-Way Passenger Lug Wrenches - Heavy Duty KT T95 27.5" 1-1/16", 1-1/4", 1-1/2", 13/16" square P/N Description Size KT TX9 SAE & Metric 1-1/2” (38 mm) Hub Cover System Cap Nut Cover Wrench HL 600 INSTALLATION TOOL Cap Nut Cover Wrench for Hub Piloted Hug-A-Lugs ® KT 30606 Special coating will not scratch or damage chrome, painted, or coated lug nut covers. GO 1721 Includes 1/2" Power Wrench 2 Dual Sockets: 17mm 19mm (3/4") 13/16", 23mm (7/8") GO 1334 Includes 1/2" Power Wrench 3" Extension 2 Thin Wall Sockets: 3/4" 13/16" Expandable Lug Nut Cap Remover Pliers OT 5047 • One step yields 3-1/2” opening for use on up to 1-ton trucks • Second step yields 5” opening for use on class 7–8 trucks • Expansion nut can not fall out and be lost! • Plastic coated handle and tips for comfort and non-marring feature • “Stud-Thru” design allows long threaded studs and fasteners to pass through the wrench opening! • “12 Point” design requires only 30 degree swing arc re-engagement for close proximity work! • Backed with Limited Lifetime Warranty • 7-1/2" slim profile that is easy to carry and store • SAE sizes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" TOOLS & EQUIPMENT Length: 18” Mandatory for any shop working with tubeless and multi-piece rims. Made from heavy-gauge steel tubing welded to a steel base. Guards against blown lock rings and rims. Tire Knocker 4-Bar Cage KT 35110 KT T102 Height Width Base 43-1/2" 20-1/2" 31-1/2" x 26" AUT579.1040 Tire Bead Seater 10 Gallon ES 20204 One-piece rubber tube for mounting hard-to-seat radial, bias-belted or conventional truck tires. Fits rim sizes 22-1/2 to 24-1/2” Bead Seaters Bead Bazooka ™ G0 GBB9LM MIS Bead Bazooka 9L G0 GBB6LM MIS Bead Bazooka 6L 8-in-1 Wrench KT 35775 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 13 TOOLS & EQUIPMENT Dual Wheel Lug Stud Remover/Setter P/N Length GN 2617 3/4” Stud Setter GN 2416 5/8” Stud Remover GN 2417 3/4” Stud Remover GN 2415 13/16” Inner Cap Remover GN 2515 1-1/8” Inner Cap Remover GN 2414 Drive-On Tool GN 2412 Inner Cap Removal Kit Stud Tools P/N Description Length Stock KT T23A Truck Lock Ring Remover Designed Especially for Firestone RH And RI rims 30” 11/16” Bead Breakers KT T26B Length: 50” Length Extended: 80” T26B has exclusive spring action design to reduce user fatigue associated with slide hammer kickback. These tools are designed to remove lock rings on most trucks on the road today. A must have for anyone mounting or demounting multi-piece rims. Bead Breaking Tool KT T26A Lock Ring Tools Heavy Duty Impact Bead Breaker Spring Action Length: 11-3/4" Stock: 1-1/4" Driving iron is used for loosening rusted truck and bus beads. Will speed truck tire repair work and save labor and time. KT T20A Tire Mount/Demount Spoons KT T45A-2000K Tubeless Truck Tire Mount/Demount Irons Model Length Stock KT T45A-2000K 37” 3/4” (19 mm) KT T45A 37” 3/4” (19 mm) KT T46A 36” 3/4” (19 mm) KT T45HD 41” 7/8” (22 mm) KT T47A 52” 1” (25 mm) Model Length Stock Curved KT T20 24” 11/16” (17.5 mm) KT T20A 30” 11/16” (17.5 mm) Drop - Center KT T21R 18” 11/16” (17.5 mm) Straight KT T19A 30” 11/16” (17.5 mm) Tire Mounting/Demounting Tools Stud Cleaning Tool P/N Description TE SBCT22 7/8” (22mm) Stud Cleaning Tool TE SCBR22 7/8” (22mm) Replacement Brush TE SBCT22 TE SCBR22 Allows you to clean 10 studs in 3 minutes or less! ESC100 Tire Dismount Tool • Removes both top and bottom bead from short side – no need to ip tire/rim • Demount all tubeless tires 17.5" through 24.5" & Super Singles up through 315/22.5" • Including most radial and bias ply tires • Bar Length: 36.25” P/N ES 90518-100-1 DISMOUNT TOOL ONLY • Works on most hubs for installation and removal. • All sizes of studs. • Installation done by pushing on the head, eliminating the need for threaded adapters. • Remove and install 10 studs in only 10-15 minutes. Wheel Stud Service Kit P/N OT 4295 • Can be powered with an impact wrench, no hydraulic power source required. • No need to remove hub from vehicle. • Reduces risk of damage to hubs, studs, and bearings when using tool. Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 14 TOOLS & EQUIPMENT KT TG11E KT T11E Handled Wedges Replacement Handles Hammers Service Station Shop Air and Air Impact Tool Hose P/N Length Head Weight Wood Handled KT T11E 30” 8-1/2 lbs Fiberglass Handled KT TG11D 18” 4-3/4 lbs KT TG11E 32” 8-1/2 lbs P/N Length For Hammer # Fiberglass KT TG11CH 18” TG11C, TG34, TG35, TG36 KT TG11EH 32” TG11E Length: 18” Head Weight: 4-3/4 lbs. Fiberglass Handled Tire Hammer KT TG35 Rubber Mallet Rubber head prevents marring surfaces. Length: 17” KT T32 • Extend tire life 25-50% • Solve vibration problems • Automatically balance while you drive Patented Centramatic Balancers are a unique line of “On Board” Balancing Systems for tires and wheels that maximize tire life and smooth your ride. Mounted behind the wheel they offer permanent solutions for balancing assemblies. Centramatic Balancers operate automatically and can adjust instantly for changing conditions. 600 Series - Wheels For Heavy Duty Trucks, Large Motor Homes CEN600630 CEN600650 CEN600660 CEN600640 800 Series - For Special Application, HD Axles with 16.5” Brakes & Aluminum Wheels CEN800820 This special application balancer is made to fit vehicles with big brake drums - 16” and/or brake drums with sprues. If used on 22.5” wheels - must be aluminum ONLY! DO NOT use with 22.5” steel wheels! Can be used with 24.5” steel or aluminum wheels. DO NOT install if valve stem contacts balancer. Bend valve stem or replace if necessary. 900 Series - For Special Application, HD Axles with 16.5” Brakes & Steel Wheels WHEEL & TIRE BALANCING P/N Wheel Size Bolt Holes Bolt Circle Axle CEN600630 22.5” 10 11.25” Steer CEN600650 24.5” 10 11.25” Steer CEN600660 24.5” 10 11.25” Rear CEN600640 22.5” 10 11.25” Rear P/N Wheel Size Bolt Holes Bolt Circle Axle CEN800820 22.5” 10 11.25” Steer P/N Wheel Size Bolt Holes Bolt Circle Axle CEN900-910 22.5” 10 11.25” Steer Centramatic Wheel Balancers • Help prevent tire cupping • Tires run 8-10% cooler For Peterbilt Designer 22.5" Rims (88667X) use CEN800822 The Dayco Service Station Shop Air and Air Impact Tool Hose features a heavy, abrasion resistant cover combined with a specially reinforced, seamless, nonporous smooth tube that provides increased pull and burst strength, durability, and maximum service life. Designed for high quality general purpose air hose, the Dayco Air Hose fills many applications around a service station or manufacturing shop such as inflating tires, blow nozzles, and machine air connection. P/N ID (in.) Length (ft.) Working Pressure (psi) Couplings DY 80004 3/8” 25 200 3/8” - Male/Male DY 80005 3/8” 50 200 3/8” - Male/Male DY 80006 3/8” 25 200 1/4” - Male/Male DY 80007 3/8” 50 200 1/4” - Male/Male DY 80010 1/2” 25 200 1/2” - Male/Male DY 80011 1/2” 50 200 1/2” - Male/Male Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 15 AUT157.1001 AUT157.1003 Used to Protect Wheel While Removing Lug Nuts 0.100in Thickness Color: Yellow AUT579.1055 Agricultural & Dually Wheels WE STOCK A FULL LINE OF The Wheel-Check provides a simple, visual means of confirming proper wheel nut torque in seconds. Reduces risk of wheel detachment accidents and resulting load damage and may reduce insurance costs. Reduces equipment downtime and maintenance costs associated with needless re-torquing. WHEEL & TIRE GUARDS & BALANCING P/N Pcs. Nut Sizes Nut Size TC WCH01 20 1-1/2” 37.5 mm TC WCH02 20 1-1/2” 38.1 mm TC WCH03 20 1-5/16” 33.0 mm TC WCH03C 100 1-5/16” 33.0 mm TC WCH04 20 7/8” 22 TC WCH04C 100 7/8” 22 TC WCH16 20 27/32” 20.5 P/N Description AUT157.1003 10 hole, 11-1/4” bolt circle, stud-piloted; 7/8” and 1-1/8” diameter studs. AUT157.1002 10 hole, 11-1/4” bolt circle, stud-piloted; 3/4” diameter studs. AUT157.1001 10 hole, 285.75 mm bolt circle, stud-piloted; 22 mm diameter studs. HL GL-7902 8 hole, 275 mm bolt circle, hub-piloted; 20 mm diameter studs. Rim Protector Wheel-Check ® Wheel-Guard Separator Plates ACCESSORIES P/N Description IM FVC-1 AirX Filtered Valve Core Upgrade to the latest in technology with Equal FLEXX With 2X more vibration absorption power, EQUAL FLEXX is the new industry benchmark in wheel- end balancing, delivering more even tire wear, lower rolling resistance and the smoothest ride. EQUAL FLEXX Drop In Bag IM EQFXWC32 Case of (32) W pkgs. (16 oz.) IM EQFXAC40 Case of (40) A pkgs. (12 oz.) IM EQFXBC40 Case of (40) B pkgs. (10 oz.) IM EQFXCC40 Case of (40) C pkgs. (8 oz.) IM EQFXDC40 Case of (40) D pkgs. (6 oz.) IM EQFXEC40 Case of (40) E pkgs. (4 oz.) IM EQFXFC40 Case of (40) F pkgs. (3 oz.) • No filtered valve core required means simpler installation • Drop in Bag application with simplified quantity chart • Larger particle size makes it easier to remove • No slip hazard on the shop floor • More fuel savings, more even tire wear, and the smoothest ride • 2x more vibration absorption power • 15% better performance • Easier to use WHY BALANCE YO UR WHEE L-ENDS? Balancing all wheel p ositions has been proven to improve fuel economy up to 2 reducing rolling resistance for the life of the tires. The savings multiply because fuel efficiency incre ses as the tr ad wears down. In fact, the last 1/5 of a tire uses 6.5% less fuel than new tread. Yet most tires have to be replaced premat to uneven wear, taking them out of service just as fuel economy peaks. Unbalanced tires also reduce tire life. More even wear yields maximum tread lif extend the takeoff mileage. Balanced tires last up to 40% longer than unbalanc saving money on equipment costs while reducing maintenance expenses. EQUAL works continuously to balance tires and the rest o f the wheel a ssembly, which dampens vibrations for bushings, U-joints, lights, batteries and the overa sus pension. Less wear-and-tear on the truck means lower overall maintenance cos ts for the life of the vehicle. A smoother ride also reduces driver fatigue and a co mfortable driver is more likely to stay with your fleet. Fleet managers are charged with decreasing cost per mile. Every tire-related is your fleet faces results in time spent in maintenance and repair rather than on Each tick of the clock drives CPM higher. Th ese costs add up quickly both in replacement equipment and in los t time. TIRE WEAR FUEL COST SMOOTHER RID E PRODUCTIVITY -VP of Main WHY BALANCE YOUR WHEEL-ENDS? Balancing all wheel p ositions has been proven to improve fuel economy up to 2 reducing r olling resis tance for the life of the tires. The savings multiply because fuel effici ency increa ses as the tread wears down. In fact, the last 1/5 of a tire uses 6.5 % less fuel than new tread. Yet most tires have to be replaced premat to neven wear, taking th m out of service just as fuel economy peaks. Unbalanced tires also reduce tire life. More even wear yields maximum tread lif extend the takeoff mileage. Balanced tires last up to 40% longer than unbalanc saving money on equipment costs while reducing maintenance expenses. EQUAL works continuously to balance tires and the rest of the wheel assembly, which dampens vibrations for bushings, U-joints, lights, batteries and the overa suspension. Less wear-and-tear on the truck means lower overall maintenance costs for the life of the vehicle. A smoother ri e also redu ces driv r f tigue and a comfortable drive is more likely to stay with your fleet. Flee t managers are charged with decreasing cost per mile. Every tire-related is you r fleet faces results in time spent in maintenance and repair rather than on Each tick of the clock drives CPM higher. These costs add up quickly both in replacement equipment an in lost time. TIRE WEAR FUEL COST SMOOTHER RIDE PRODUCTIVITY Balancing all wheel positions has been proven to improve fuel economy reducing rolling resistance for the life of the tires. The savings multiply fuel efficiency increases as the tread wears down. In fact, the last 1/5 uses 6.5% less fuel than new tread. Yet most tires have to be replaced to uneven wear, aking them ut of service just as fuel economy peaks Unbalanced tires also reduce tire life. More even wear yields maximum extend the takeoff mileage. Balanced tires last up to 40% longer than u saving mo ney on equipment costs while reducing maintenance expense EQUAL wo rk c ntinuously to balance tires and the rest f the wheel as which dam pens vibrations for bushings, U-joints, lights, batteries and t suspension. Less wear-and-tear on the truck means lower overall main costs for the life of the vehicle. A smoother ride also reduces driver fat a comfortable driver is more likely to stay with your fleet. Fleet managers are charged with decreasing cost per mile. Every tire-re your fleet faces results in time spent in maintenance and repair rather Each tick of the clock drives CPM higher. These costs add up quickly bo replacement equipment and in lost time. TIRE WEAR FUEL COST SMOOTHER RIDE PRODUCTIVITY uses 6.5% less fuel than new tread. Yet most tires have to be replaced to uneven wear, taking th m out of service just as fu l economy peaks Unbalanced tires also reduce tire life. More even wear yields maximum extend the takeoff mileage. Balanced tires last up to 40% longer than u saving money on equipment costs while reducing maintenance expense EQUAL wo rk co tinuously to balance tires and the rest f the wheel as which dam pens vibrations for bushings, U-joints, lights, batteries and t suspensio n. Les w ar-an -tear on the truck means lower overall ma n co ts for t he life of the vehicle. A smoother ride also r duces driv r f a comfortable driver is mor likely to stay with your fleet. Fleet managers are charged with decreasing cost per mile. Every tire-re your fleet faces results in time spent in maint nance and repair rather Each tick of the clock drives CP M high er. These costs add up quickly bo replacement equipment an in lost time. TIRE WEAR FUEL COST SMOOTHER RIDE PRODUCTIVITY High visibility loose wheel-nut indicator Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 16 Wheel Centering Pin Sets Center Wheels Only • Reusable shop tool • Sold in sets of 3 • Hardened steel • Storage case included TRU-BALANCE products are unlike anything on the market today. With hub-piloted wheels, the weight of the wheel and tire rests on the top pilots creating a gap in the bottom pilots. Even the smallest gap results in an “egg-shaped” motion upon rotation. This uneven motion creates tire vibration and irregular tire wear. The bottom line is you can’t balance an egg. The TRU-BALANCE products bypass the hub pilots and center the wheel back to the wheel studs. This creates true center of the wheel and eliminates the uneven motion. The result is a smooth ride, increased tire life and increased fuel mileage. How to choose the right solution for you Regardless of which solution you choose, you should always use the TRU-BALANCE wire brush to thoroughly clean the holes and the threads to ensure the best centering results. All of the TRU-BALANCE products do the same thing: They center the wheels. The only difference is the application of the product. If you can fit a business card between any of your pilots, you are off center. Heavy Duty Trucks P/N TRUA-1573 • Steer & drive axles/some trailers • 4” length (long) • Steel & aluminum wheels • 22mm stud size Heavy Duty Trucks P/N TRUA-1339 • Steer axles • 3” length (long) • Steel & aluminum wheels • 19.50” aluminum wheels • 22mm stud size WHEEL CENTERING PRODUCTS Solution A This is the reusable shop tool that you use when you mount the wheels. THESE PINS DO NO STAY ON THE WHEEL. The three pins are threaded on the studs in the 12, 4 & 8 o’clock positions. The wheel is then mounted over the pins. Use an impact wrench to tighten the lug nuts. Remove the pins and place the remaining lug nuts on the wheel and tighten with the impact wrench. Go over the wheel again and tighten to your wheel manufacturers specifications. There are various sizes of the tool available. See below for details. This is sleeve set that stays on the wheels at all times. It is for STEER WHEELS ONLY with a universal brake drum. Three sleeves are threaded on the studs at the 12, 4 & 8 o’clock positions of each wheel until seated against the hub. The brake drum is then installed followed by the wheel. The unique shoulder design of this sleeve centers both the wheel and the drum. There are many different sizes of Solution B to accommodate the various brake drums. See next page for details. This is sleeve set that stays on the wheels at all times. It can be used for steer and drive axles as well as trailer axles. Three sleeves per wheel slide over the studs and into the wheel from the outside using the 12, 4 & 8 o’clock positioning. See next page for details. Solution A Solution B Solution C Wire Brush for Electric Drill TRUX-1755-WB Recommended: Use wire brush to clean the wheel studs before installation Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 17 Internal Centering Sleeves Center Wheels & Brake Drums • Steer Axles Only Aluminum Wheels P/N TRUB-1504-GA 1.25” Diameter Hole - 1/4-5/16” Hole Depth 1.00” Hole Diameter - 1/2” Hole Depth P/N TRUB-1594-CA P/N TRUB-2748-A *Non-Threaded • Sold in sets of 6 per axle • For universal brake drums • Stays on the wheel, install them & forget them • 22mm threads • Zinc plated to prevent corrosion Wire Brush for Electric Drill TRUX-1755-WB Recommended: Use wire brush to clean the wheel studs before installation Brake drum off center 1.25” Diameter Hole - 1/2” Hole Depth Brake drum centered using sleeves Conmet 107164, 107193, 107507, 107862, 107453, 10001781, 10005331, 10001783, 10005332 1.28” Diameter Hole - 1/2” Hole Depth P/N TRUB-1860-CON-A Gunite Webb Arvin Meritor 3573X 3510X 61528B 53-123448-002 3596X 3721AX 65548B 53-123567-002 3597X 3726X 53-123589-002 3598X 3758X 90600B 3686X 3774X 3687X 3800X Gunite Webb Arvin Meritor 9001X 90089BK 53-123512-002 9000X 89870BK 53-123542-002 9035X 90174BK Gunite Webb Conmet 3753AX 66866B 107864 3796X 61527B 3598B 65555B 3754 65670B 3771 65545B 3772X 65670B 3595AX 3596BX WHEEL CENTERING PRODUCTS Solution B Solution C Heavy Duty External Centering Sleeves Centers Wheel Only • Aluminum & Steel Wheels • Sold in sets of 6 per axle • Stays on the wheel, install them & forget them • 19.50” / 22.50”/ 24.5” wheel • 22mm wheel studs • Zinc plated to prevent corrosion Axle Position & Wheel Type Steer Axle Drive Axle Aluminum Steel/Steel Axle Position & Wheel Type Drive Axle Aluminum - Super Single 14” Rim Wide Base Tire P/N TRUC-1611-AS P/N TRUC-1664-HD-A 2 Piece Sleeve Centering System Centers Wheel & Brake Drum • FOR DUAL WHEELS ONLY • Sold in sets of 6 per axle • Stays on the wheel, install them & forget them • 19.50” / 22.50”/ 24.5” wheel • 22mm wheel studs • Zinc plated to prevent corrosion • 2 Piece System allows for easier install and removal (C-2341-GA) (C-2342-GS) (C-1611-AS) (C-1611-AS) • For Aluminum/Aluminum Wheels • 1.25” Hole Diameter - 1/2” Hole Depth • For Aluminum/Steel Wheels • 1.25” Hole Diameter - 1/2” Hole Depth P/N TRUC-5000-GAA P/N TRUC-5001-GAS Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 18 • Use with centering pins or external sleeves • Centers brake drum holes to stud • Stays on wheel, install them & forget them • 22mm wheel studs • Zinc plated to prevent corrosion Front Drums TRUS-1707-G (Sold in Sets of 6) 1.25” Diameter Hole - 1/2” Hole Depth Gunite Webb Arvin Meritor 3573X 3510X 61528B 53-123448-002 3596X 3721AX 65548B 53-123567-002 3597X 3726X 53-123589-002 3598X 3758X 90600B 3686X 3774X 3687X 3800X TRUS-1923GR-10 (For 10 hole wheels, sold in sets of 10) 1” Diameter Hole - 1/2” Hole Depth Rear Drums Gunite Webb Arvin Meritor 3753AX 3600A 66864B 90660BK 3771X 3402X 61950B 9006X 69547B 89996B TRUS-2379-GW (For 10 hole wheels, sold in sets of 10) 1.1” Diameter Hole - 1/2” Hole Depth Rear Drum Gunite Webb 3922X 56864B WHEEL CENTERING PRODUCTS Brake Drum Spacers Sleeve Nuts 10 Hole Wheel • Pin and Sleeve install positions • Rear brake drum spacer positions AUT201.3031 6 mm Sleeve- For Steel Steer Wheels AUT201.3032 19 mm Sleeve- For Aluminum Steer Wheels, Dual Steel Drives, Steel Outer/Aluminum Inner AUT201.3033 28 mm Sleeve- For HD Aluminum and Super Singles, Aluminum Outer/Steel Inner 450-500FT/Lbs. AUT201.3034 39 mm Sleeve- For Dual Aluminum Wheels Standard Applications: - The Sleeve offers more thread engagement and deeper penetration - The chamfered nose allows for ease of wheel centering and installation The “Sleeve” - Protects and covers the threads from wear and the elements - Reduces vibration and the wear and tear on wheel ends - Fills the gap between the stud and the stud hole and allows the rim to rest on the sleeve - Lengths designed for specific axle applications and wheel configurations OT 7379 100–600 ft. lbs. Accutorq Clikker torque wrench with 3/4” drive. Features include ratcheting head, all-metal construction, permanently roll-marked scales, and soft- grip rubber handle. Accutorq Clikker 3/4” Torque Wrench Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 39Tire Supply 19 P/N HF VT46 TPMS Diagnostic Tool • Barcode Scanner • Part Number lookup • US/ European/ Asian Vehicles • OBD II connection and cable TPMS Diagnostic Tools with Intellisens Universal Sensors Sensors HF UVS3040 (Sensor) 315 MHz Sensor with Metal Valve Stem HF UVS3041 (Sensor) 315 MHz Sensor with Rubber Valve Stem HF UVS4040 (Sensor) 433 MHz Sensor with Metal Valve Stem HF UVS2000 (Sensor) 433 MHz Sensor with Metal Valve Stem HF UVS4041 (Sensor) 433 MHz Sensor with Rubber Valve Stem Service Parts HF RDV041 Rubber Snap-in Valve Stem P/N HF HC1000 TPMS Bluetooth Solution Programmer Bluetooth sensor to allow the use of the app on your phone to program sensors P/N HF 73905234 Complete TPMS Starter Pack • VT46 TPMS TOOL + OBD • Six (6) HF UVS4041 433MHz Sensor • Six (6) HF UVS3041 315MHz Sensor • Six (6) HF RDE036 Fixed Metal Valve (6) HF UVS4041 433MHz Sensor (6) HF UVS3041 315MHz Sensor (6) HF RDE036 Fixed Metal Valve The VT46 TPMS tool with OBD, IntelliSens Universal Sensor, and metal valve replacement provides everything your shop needs to service more than 140 million vehicles in operation today. TPMS DIAGNOSTIC TOOLS / AIR TOOLS 1/2” Impactool ™ Maximum Titanium ‘N’ Torque IR 2235TiMAX w/ 2” Extension IR 2235TIMAX-2 • Handle exhaust directs air away from user • Adjustable power regulation • Pressure-fed lube system for trouble-free performance & long life • 590 ft.-lbs. maximum torque • The powerful tool provides an even impact and is durable enough to last through the toughest work environments • 600 ft.-lbs. maximum torque 1/2” Extended Anvil Air Impact IR 231HA-2 1/2” Super Duty IR 231C The top choice in tire service centers Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==