05SKF Hyatt Seals Hub Caps and Bearings and Hub Assemblies CATALOG NUMBER 05 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ CR Scotseal X-Treme SKF TF hubcap plug Hand installable • Eliminates installation problems and avoids costly “do overs” • Ends searching for the specific tool for each seal part number Advanced sealing materials • HNBRX material provides outstanding performance and extreme heat resistance • EPDM material on the ID makes a perfect seal even on worn spindles • Provides longer life in contaminated conditions • Compatible with all popular synthetic lubricants Unitized design with 4 sealing lips • Provides clean running surfaces for sealing lips • 3 metal unitizer rings for sealing lip protection during installation and service • Primary Waveseal sealing lip sweeps oil back on the bearings for cooler operation • 3 dirt barriers keep out contaminants extending service life Extended warranty coverage • 5 years / 500,000 mile warranty The CR Scotseal X-Treme requires two tools — your hands! Just slightly lubricate the ID and OD of the new seal with the wheel end lubricant and press the new seal evenly into the hub. Wait 5 minutes and install the hub onto the spindle. Installs quickly and correctly by hand — every time! The CR Scotseal X-Treme seal offers exceptional performance in virtually all operating conditions. It’s a unitized, one-piece hand installable seal that has three metal unitizer rings for damage free installation. This seal uses an advanced HNBRX material that provides low friction, excellent high heat capability, outstanding wear resistance, and broad compatibility with synthetic lubricants. Its low friction and high rolling efficiency provides improved fuel economy and lower emissions. Ideal for fleets looking for maximum uptime, lowest cost per mile and the best ROI seal. SKF’s oil bath hubcap contains the new patent pending SKF TF center-fill plug, which has an oil shield and concealed vent design, allowing the wheel end to vent without clogging, while the exterior of the hubcap remains clean with reduced oil seepage while venting. CR 454301-4 1. Vent is completely covered with one piece design to keep water spray and contaminants out 2. In the event that some oil gets past the oil splash shield the smooth interior surface prevents oil build up at vent 3. Oil splash shield vents air, while keeping heavy oil splash from exiting through the vent © SKF Group 2020 ® SKF and TF are registered trademarks of the SKF Group. The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. Publication 457--- • 04/2020 • Printed in U.S.A. www.skfpa @skfpartsi without clogging, while the exterior of the hubcap remains clean with reduced oil seepage while venting. Features & Benefits • New vented center-fill plug with an internal oil splash shield to keep oil in, and an outside cover to prevent road splash and pressure washer water from entering the hub • TF Plug part number is 454301-4; Packaged with 4 in a bag 1. SKF VSM NA 900 N. State Street Suite 100 Elgin, IL 60123 800-882-0008 www.vsm.skf.com © SKF Group 2020 ® SKF and TF are registered trademarks of the SKF Group. The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. Publication 457--- • 04/2020 • Printed in U.S.A. www.skfpartsinfo.tv @skfpartsinfo SKF’s oil bath hubcap contains the new patent pending SKF TF center-fill plug, which has an oil shield and concealed vent design, allowing the wheel end to vent without clogging, while the exterior of the hubcap remains clean with reduced oil seepage while venting. Features & Benefits • New vented center-fill plug with an internal oil splash shield to keep oil in, and an outside cover to prevent road splas h and pressure washer water from ente ring the hub • TF Plug part number is 454301-4; Packaged with 4 in a bag 2. 3. Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 05SKF Hyatt Seals Hub Caps and Bearings and Hub Assemblies CR Scotseal X-Treme , continued Designed to keep out road contamination and oil in at the bearings Popular applications Interchange HNBRX OD • Easy to install • No tools required Primary sealing lip • Waveseal lip pumps oil back to the bearings for cooler operation and extended life • Low friction design for increased and improved fuel economy • Provides extreme heat resistance and broad compatibility with synthetic lubricants Bumper, axial and radial dirt lips • 3 dirt barriers keep out contaminants • Bumper lip acts as a primary dirt excluder • Added bearing protection Unitized design • 3 metal unitizer rings for damage free installation EPDM ID • Easy to install • Perfect seal even on worn spindles • Optimized sealing life under virtually all driving conditions Conventional Pre-adjusted Applications CR Scotseal X-Treme Inner Cup Inner Cone Outer Cup Outer Cone Inner Bearings Outer Bearings Steer Steer Axle, 4,700 lb, 7,500 lb, 8,000 lb, Meritor, Navistar CR 28759XT JM207010 JM207049-A VP BR25820 BR25877 N/A N/A FF Steer Axle, 12,000 lb, Eaton, Ford, Freightliner, Kenworth, Meritor, Navistar, Peterbilt, Volvo, Western CR 35058XT SET413 SET406 SET427* SET428* HM212011 VP HM212049 VP BR3720 BR3782 FL Steer Axle, 16,000 lb, 20,000 lb, Ford, Freightliner, Kenworth, Mack, Meritor, Navistar, Peterbilt, Volvo, Western Star CR 43761XT SET423 SET424 SET445* SET446* BR6420 6461-A VP 552-A VP 555-S VP Drive Drive Axle, 34,000 lb, Eaton, Ford, Meritor, Navistar, Volvo CR 38776XT SET411 SET408 N/A N/A BR47620 BR47686 BR39520 BR39590 R Drive Axle, 38,000 lb, 46,000 lb, Eaton, Ford, Freightliner, Kenworth, Meritor, Navistar, Peterbilt, Volvo, Western Star CR 47691XT SET403 SET401 SET445* SET446* 592-A VP 594-A VP BR572 BR580 Drive Axle, 40,000 lb, 44,000 lb, Mack CR 42673XT SET421 SET426 N/A N/A HM516410 VP HM516449-A VP BR47620 BR47679 Trailer TN Trailer Axle, 22,500 lb, Eaton, Meritor, Spicer, Standard Forge CR 46300XT SET414 SET413 SET431* SET427* HM218210 VP HM218248 VP HM212011 VP HM212049 VP TP Trailer Axle, Eaton P-22, Fruehauf, Meritor, Pro-Par, Spicer CR 42627XT SET415 SET415 SET432* SET432* HM518410 VP HM518445 VP HM518410 VP HM518445 VP CR Scotseal X-Treme Stemco Discover Stemco Guardian Stemco Voyager FM Red 37 FM Gold 38 Meritor Standard Meritor Premium ConMet CR 28759XT N/A 308-0866 383-0166 370150A N/A N/A N/A N/A CR 35058XT 383-0236 308-0836 383-0136 370001A 380001A MER0136 MER0236 10045885 CR 38776XT 393-0212 309-0912 393-0112 370023A 380023A MER0112 MER0212 N/A CR 42627XT 373-0223 307-0723 373-0123 370065A 380065A MER0123 MER0223 10045889 CR 42673XT 393-0204 309-0904 393-0104 370031A 380031A MER0104 MER0204 N/A CR 43761XT 383-0264 308-0864 383-0164 370048A 380048A MER0164 MER0264 10045883 CR 46300XT 373-0243 307-0743 373-0143 370025A 380025A MER0143 MER0243 10045888 CR 47691XT 393-0273 309-0973 393-0173 370003A 380003A MER0173 MER0273 10045887 Part numbers listed are for reference only. Some applications may use parts not listed on this chart. See SKF catalog 457601 for complete application listings. * Cup and Cone not sold separately. Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 05SKF Hyatt Seals Hub Caps and Bearings and Hub Assemblies CR Scotseal PlusXL The CR Scotseal PlusXL is a unitized, one-piece hand installable design seal that offers maximum sealing life under virtually all operating conditions. This seal uses an advanced HNBR material that provides high temperature capability, great wear resistance, and broad compatibility with synthetic lubricants. The CR Scotseal PlusXL is the preferred choice among many OE truck and trailer manufacturers and is the OE standard seal in pre-assembled hubs, due to its proven history of high performance. Hand installable • Eliminates installation problems and avoids costly “do overs” • Ends searching for the specific tool for each seal part number Advanced sealing materials • HNBR material provides great heat resistance in normal operating temperatures • EPDM material on the ID makes a perfect seal even on worn spindles • Provides longer life in contaminated conditions • Compatible with all popular synthetic lubricants Unitized design with 4 sealing lips • Provides clean running surfaces for sealing lips • Primary Waveseal sealing lip sweeps oil back on the bearings for cooler operation • 3 dirt barriers keep out contaminants extending service life Extended warranty coverage • 3 years / 300,000 mile warranty The CR Scotseal PlusXL requires two tools — your hands! Just slightly lubricate the ID and OD of the new seal with the wheel end lubricant and press the new seal evenly into the hub. Wait 5 minutes and install the hub onto the spindle. SEE YOUR SALESMAN FOR APPLICATIONS Installs quickly and correctly by hand — every time! P/N Application Cone/cup Timken NTN HYTSET401 R DRIVE AXLE (outer) 580/572 SET401 SET401 HYTSET403 R DRIVE AXLE (inner) 594A/592A SET403 SET403 HYTSET406 FF STEER AXLE (outer) 3782/3720 SET406 SET406 HYTSET413 FF STEER AXLE (inner) & N TRAILER AXLE (outer) HM 212049/011 SET413 SET413 HYTSET414 N TRAILER AXLE (inner) HM 218248/210 SET414 SET414 HYTSET415 P TRAILER AXLE (inner & outer) HM 518445/410 SET415 SET415 • Leading First Fit position in the HD Original Equipment wheel-end market for over 15 years! • 70% Market share in the N.A. OEM Commercial Vehicle Industry • Extremely close roller diameter variation within any assembly • Superior dimensional and surface finish controls • Optimum geometry, including roundness, profile and angle • Crowned rollers and pathways • Through hardened steel for optimized life • Super clean steel for rollers and races • High strength steel cages • Low vibration levels tested 100% SKF Fully Loaded Hub Assembly HYATT TAPERED ROLLER BEARINGS Loaded Hub P/N Bearings (Inner/Outer) CR Scotseal X-Treme Composite Cap (Oil / Grease) Aluminum Cap (Oil / Grease) Lbs. Stud Standout Description CR TNHUB1 SET413 / SET414 46300XT 1643 / 1343 1843 / 1841 42 3.72" Dual Alum Tapered axle-ABS-Aluminum wheels (Long studs) CR TNHUB2 SET413 / SET414 46300XT 1643 / 1343 1843 / 1841 41 2.96" Dual Steel Tapered axle-ABS-Steel wheels (Short studs) CR TPHUB1 SET415 / SET415 42627XT 1696 / 1399 1869 / 1899 46 3.72" Dual Alum Parallel axle-ABS-Aluminum wheels (Long studs) CR TPHUB2 SET415 / SET415 42627XT 1696 / 1399 1869 / 1899 46 2.96" Dual Steel Parallel axle-ABS-Steel wheels (Short studs) SKF brings together the top heavy duty wheel end technologies to offer the most durable, technologically advanced solution to give your fleet HUGE UPTIME. This assembly includes the Dura-Light Hub ® unit, the lightest hub in the industry that is also as durable as steel forgings. It also features the CR Scotseal X-Treme with advanced heat technology and SKF HYATT bearings. Dura-Light Hub ® • More capacity for entire trailer life; helps offset recent increases in tractor weight • Weight reduction without trailer life compromise • Industry-leading lubricant capacity extends bearing and seal life • No aluminum hub maintenance risks SKF Exploded hub with included retainer Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==