11Clutch Guide New This clutch system offers the durability and performance necessary to withstand the high actuation conditions and associated with automated transmission systems. This clutch has been developed for a wide range of customer applications from Linehaul to Vocational to meet with the many specific automated transmissions offered by Eaton. CLUTCH & GEARING GUIDE MIDWESTWHEEL.COM IOWA MISSOURI DES MOINES 1436 E. Ovid Ave. office 515.265.1491 fax 515.265.4120 parts fax 800.314.4329 parts 800.888.0248 CEDAR RAPIDS 200 50th Ave. S.W. main 319.365.4453 fax 319.365.6327 parts fax 877.706.6085 parts 800.332.5435 DAVENPORT 8502 Northwest Blvd. main 563.322.2671 fax 563.322.5940 parts 800.553.1886 SIOUX CITY 1819 4th St. main 712.252.7969 fax 712.252.6149 parts 800.943.3534 CLEAR LAKE 840 Hwy. 18 W. main 641.357.7101 fax 641.357.8190 parts fax 800.548.9674 parts 800.397.5630 TRUCK PARTS SUPER STORE TM KANSAS CITY 5801 E. Front St. main 816.471.1552 fax 816.471.0813 parts 800.821.7402 JOPLIN 2424 Stephens Blvd. main 417.717.6022 fax 417.782.7126 parts 866.318.9111 August 2021 (11Clutch Guide New) Clutch Parts & Accessories ∙ Flywheels ∙ Transmissions ∙ Differentials At the front of the UltraShift 6, 10 and 13-speed transmissions is the UltraShift DM clutch, which engages and disengages without an in-cab pedal. The AutoClutch uses a traditional two-plate configuration for heavy duty and single-plate for medium duty, complete with soft rate dampers and ceramic facings for smooth engagement. UltraShift ™ DM Clutch Eliminates the need for a clutch pedal and helps to maximize clutch life. UltraShift PLUS ECA (Electronic Controlled Actuator) MC MAX121000X 2”-10 Spine ∙ 1750ft/lb MC MAX122002X 2”-14 Spine ∙ 1850ft/lb AUTOMATED MANUAL TRANSMISSION CLUTCHES CATALOG NUMBER 11 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ *New flywheel required for every install *Eaton software required to remove and install unit P/N OE Reference Description Detroit D12 Transmission MC ANK4489CL K-4489 (Eaton) Single-Plate, 18 Involute Spline, Organic / 6-Spring / 1850 Torque Volvo I-Shift / Mack mDrive (13L Engine, Volvo I-Shift and Mack mDrive) MC MAX104461-1 104461-1 (Eaton) / 3400 700 359 (Sachs) Single-Plate, 24 Involute Spline, Organic / 6-Spring / 1850 Torque MC A-1001 - Clutch Actuator for MC MAX104461-1 430mm x 50mm Stamped Steel Clutch *New inertia brake may be required P/N GP K3637 *Eaton software required to remove and install unit Offered in these torque ranges: 1860 2050 2250 • OE supplied friction material USA made • Springs are OE quality USA made • Castings and stamping are USA made • All components are 100% new • New center plates Proudly Made in the USA • Self aligning release bearing • CNC machined housing • 6 coil spring with 3 assist spring technology • 2 year / 200,000 mile warranty for line haul applications or 1 year / 100,000 mile warranty for severe duty type applications New and Reman Available MC MAX3400300063X 1700 MAX TORQUE MC MAX3400300193X 1 860 MAX TORQUE MC MAX3400300195X 2050 MAX TORQUE MaxHD Sachs Reman Clutch Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 11Clutch Guide New 2 Clutch Guide MC MAX1076835(X) New/Reman MC MAX10723722(X) New/Reman MC MAX10734212(X) New/Reman MC MAX10805059B(X) New/Reman Manual Adjust MaxHD NEW Manual Adjust MaxHD REMAN Self Adjust SOLO MaxHD REMAN MaxHD Sachs REMAN CAT, CUMMINS, DETROIT 14” X 1-3/4” 10 SPLINE Single Plate, Flat Flywheel MC MAX1076835 MC MAX1076835X 2 Plate, Flat Flywheel MC MAX10723722 MC MAX10723722X 14” X 2” 10 SPLINE 2 Plate, Flat Flywheel MC MAX10734212 MC MAX10734212X 14” X 2” 10 SPLINE 2 Plate, Pot Type Flywheel MC MAX10805059B MC MAX10805059BX CAT, CUMMINS, DETROIT, VOLVO, INTERNATIONAL, MERCEDES 15-1/2” X 2” 10 SPLINE STANDARD DUTY 2 Plate, Flat Flywheel MC MAX10839182 MC MAX10839182X HEAVY DUTY 2 Plate, Flat Flywheel MC MAX10892582 MC MAX10892582X MC MAX10970182X MC MAX3400300063X MC MAX10892582H MC MAX10892582HX MC MAX10839174 MC MAX10839174X MC MAX3400300193X SUPER HEAVY DUTY MC MAX10839193H MC MAX10839193HX MC MAX10939193HX 2 Plate, Flat Flywheel MC MAX10892525 MC MAX10892525X 500+ HP MC MAX10970125X MC MAX3400300195X MC MAX10892525H MC MAX10892525HX MACK HIGH TORQUE MC MAX10893551X 2 Plate, Flat Flywheel MC MAX10893591 MC MAX10893591X MC MAX10993591X All MaxHD Clutches have 3 zerk fittings in housing equivalent to 208 and 209 Eaton Series Clutches 2 Year, Unlimited Mileage Warranty UltraShift ™ DM Clutch Eliminates the need for a clutch pedal and helps to maximize clutch life. UltraShift PLUS ECA (Electronic Controlled Actuator) MC MAX121000X 2”-10 Spine ∙ 1750ft/lb MC MAX122002X 2”-14 Spine ∙ 1850ft/lb AUTOMATED MANUAL TRANSMISSION CLUTCHES *New inertia brake may be required P/N GP K3637 *Eaton software required to remove and install unit *New flywheel required for every install *Eaton software required to remove and install unit Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 11Clutch Guide New 3 MC MAX10892525(X) New/Reman MC MAX10892525H(X) New/Reman MC MAX10839193H(X) New/Reman MC MAX10939193HX Reman MC MAX10892582(X) New/Reman MC MAX10970182X Reman MC MAX10892582H(X) New/Reman MC MAX10839182(X) New/Reman MC MAX10839174(X) New/Reman MC MAX10893591(X) New/Reman MC MAX10993591X Reman MC MAX10893551X Disc Springs Disc Facing Min. Flywheel Bore Opening Plate Load Max Torque (Ft./Lbs.) 8 4 Pad Ceramic Button 7” 2800 620 8 3 Pad Ceramic Button 7” 2400 860 8 3 Pad Ceramic Button 7” 2800 900 8 4 Pad Ceramic Button 7” 3600 1400 8 4 Pad Ceramic Button 7” 3600 1400 7 (Sachs 6) 4 Pad Ceramic Button 10” 4000 1700 7 6 Pad Ceramic Button 10” 4000 1860 10* (Sachs 6) 4 Pad Ceramic Button 8.5” 4000 1860 10* 6 Pad Ceramic Button 8.5” 4000 2050 7 6 Pad Ceramic Button 10” 4000 2250 7 (Sachs 6) 6 Pad Ceramic Button 10” 4000 2050 6 w/ Spline Saver 6 Pad Ceramic Button 10” 4000 2250 9 4 Pad Ceramic Button 10” 4000 1860 9 6 Pad Ceramic Button 10” 4000 2050 AUTOMATED MANUAL TRANSMISSION CLUTCHES MCI, Prevost, Van Hool and Serta Coaches SCS3400 000 358 Newell Coaches SCS3400 654 141 Bearing and Roller fork Kit SCS3189 600 001 ZF-AS TRONIC AND FREEDOMLINE TRANSMISSIONS *Use 7 Spring with FRO Transmission to avoid engine idle rattle Proudly Made in the USA Detroit D12 and Volvo I-Shift / Mack mDrive: See Front Page Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 11Clutch Guide New 4 PARTS & ACCESSORIES CLUTCH LUBE ASSEMBLIES MC GH8 8" Lube Tube Assembly MC GH12 12" Lube Tube Assembly Seal P/N O.D. I.D. Width Seal Temp. Rating Grease Temp. Rating Black Nitrile NCB203-FF.4 1.58" .67" .47" +248°F +347°F NCB205SS.4 2.05" .99" .59" +248°F +347°F NCB206FF 2.45" 1.18" .63" +248°F +347°F NCB206SS 2.45" 1.18" .63" +248°F +347°F NCB305DD 2.45" .99" .67" +248°F +347°F NCB305SS 2.45" .99" .67" +248°F +347°F NCB306SS 2.84" 1.18" .75" +248°F +347°F NCB306SSL (Mack) 2.84" 1.18" .75" +248°F +347°F Viton NCB306VV* 2.84" 1.18" .75" +419°F +400°F RT Series (K-2468) MC MIK1 MaxHD - Viton high temp pilot bearing, MC HB200 hinged clutch brake PA1EF66030 Nitrile pilot bearing, 127760 1 piece clutch brake FR Series (K-3600) MC MIK3 MaxHD - New design input shaft, Viton high temp pilot bearing, MC HB200 hinged clutch brake PA1900172 New design input shaft, Nitrile pilot bearing, 127760 1 piece clutch brake FR Series (K-3602) MC MIK8 MaxHD - Original design input shaft, Viton high temp pilot bearing, HB200 hinged clutch brake FR Hydraulic Release (K-4124) MW1K4124 New design input shaft, Viton high temp pilot bearing, 127760 1 piece clutch brake Rockwell Meritor RM, RMO, RMX, G MW1KIT 20088 Meritor input shaft, Viton high temp pilot bearing, 127760 1 piece clutch brake OIL SEAL KIT PA1EF69520 INPUT SHAFT ASSEMBLY PA1EF67490 10,13,15,18 Speed Hinged *Minimum Eaton Clutch Division: The operating temperature that the pilot bearing sees has increased in the last several years. This creates operating conditions that are no longer acceptable to the standard pilot bearings and grease. In addition, the life of the clutch has increased. The use of high temperature grease and Viton seals are now mandatory to ensure adequate bearing life. Pilot bearing failure usually results in a warranty claim for drag or clutch noise. This results in a claim against Eaton Clutch. CLUTCH BRAKES MC HB200 Hinged Clutch Brake 2" x .375" Thick - Tooth Style MC HB200-440 Hinged Clutch Brake 2" x .44" Thick - Tooth Style MC HB200-500 Hinged Clutch Brake 2" x .5" Thick - Tooth Style MC HB175 Hinged Clutch Brake 1" Tooth Style MD BK312 Hinged Clutch Brake 1.75" Button Style MD BK313 Hinged Clutch Brake 2" Button Style MC AHB200 Multi-Piece Hinged Clutch Brake 2" x .375" Thick Button Style 2-Piece MC M175 2 pc. Babcock Split Clutch Brake 1.75" MC M200 2 pc. Babcock Split Clutch Brake 2" MC 127200 2 pc. Split Brake 2" Roll Pin 1-Piece MC 127740X 1 pc. Torque Limiting Brake 1.75" MC 127760X 1 pc. Torque Limiting Clutch Brake 2" MC 125C-40 1.75” x .125” Thick MC 125C-41 2” x .125” Thick CLUTCH INSTALLATION KITS CLUTCH FORK MW1105C-137 HYDRAULIC CLUTCH RELEASE FORK AUT755.CF102H Ref. A7786 DRIVE LUGS MC 274C-6 Drive Pin CLUTCH ADJUSTER MC 125489 Kwik Adjuster CROSS SHAFTS MW1106C1185R 5.76" Short Shaft MW1106C1498R 6.50" Short Shaft BELL HOUSE BUSHING MW112815 CLUTCH BRAKE WASHERS PILOT BEARINGS Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 11Clutch Guide New We Resurface Flywheels in DM • DV • KC TOOLS OT 5044 Clutch Self-Adjusting Rotator Tool – 3/4” MC MAXCAT1 Clutch Adjustment Tool MC GT1 Bushing Grease Tool - Clutch CLUTCH ALIGNING SHAFTS MISCELLANEOUS TOOLS CLUTCH HANDLER - LOW CLEARANCE OT 5018A Flywheel Handling Attachment for Clutch Handler #5018 516160 CLUTCH ADJUSTING WRENCH OT 7028 CLUTCH ADJUSTMENT GAUGE SET OT 5035 TRANSMISSION OUTPUT SHAFT END YOKE REMOVER OT 7075 TRANSMISSION JACK OT 5019A NEW FLYWHEELS *Not recommended to turn the flywheel, always replace the flywheel as a best practice. Bold Part Numbers are Stocking Flywheels, non-stocking units available within 24-48 hours Flywheel Gauge P/N MC FG1 P/N OEM # Application Description Bore Dia. Pilot Mounting CAT MW1WA1265875 1265875 C7/3116/3126 Flat 134 tooth 13" OR 14" CLU 8BLT 1 DOWEL 17OD 134 7" 206 / 305 8 Bolt Holes & 1 Dowel MW1WA2569653 2569653 C15, C16, C18, 3406, 3406E Flat 113 tooth 15" CLUTCH FLAT 10" OPEN 20OD 113T 10.12" 306 12 Bolt Holes MW1WA4P8515 4P8515 C9/ C10 /C11/ C12 /C13 / 3176 Flat 113 tooth 15" CLU 10"OP 8BLT 1DOWL 20OD 113T 10" 306 8 Bolt Holes MW1WA9Y9311 9Y9311 3208 Flat 134 tooth 14" CLU 7.12"OP 10 OFST BLT 17" 134 7.12" 206 / 305 10 Offset Bolt Holes MW1WA901-10-4112 4P4797 3406/3406E/C15 Flat 113 tooth 10" OP 15" OD 113T 10" 306 12 Bolt Holes CUMMINS MW1WA3016495 3016495 NT855 Pot 103 Tooth 14" CLU CUP 6BLT 17"OD-103T 8.37" 306 6 Bolt Holes & 2 Threaded MW1WA3042787 3042787 L10 / M11 Pot 103 tooth 14" CLU CUP 8BLT 2 THRD 17"OD-103T 7.25" 306 6 Bolt Holes & 2 Threaded MW1WA902-110-4130 3071535 N14 / NT855 Flat 103 tooth 15" CLU FLAT 6BLT 2 THR 17"OD-103T 10.12" 306 6 Bolt Holes & 2 Threaded MW1WA3071615 3071615 L10 / M11 Flat 103 tooth 15" CLU FLAT 8BLT 2 THR 17"OD-103T 10.12" 306 8 Bolt Holes & 2 Threaded MW1WA3680922 3680922, 3680921 ISX, Signature 600 Flat 113 tooth 15" CLU FLT 10" 12BLT 20" OD 113T 10" 306 12 Bolt Holes MW1WA3906807 3906807 8.3L C-Series Flat 173 tooth 14" CLU FLT 8BLT 2 THR 17"173T .54" 7.25" 206 / 305 8 Bolt Holes & 2 Threaded MW1WA3921263 3921263 5.9L B Series Flat 173 tooth 14" CLU FLT 8BLT 17" OD -138T .610" 7.25" 306 8 Bolt Holes MW1WA3922645 3922645 8.3L C Series Flat 138 tooth 14" CLU FLT 8BLT 17" OD -138T .875" 7.25" 206 / 305 8 Bolt Holes DETROIT MW1WA23514177 23514177 Light Weight - 60 Series Flat 118 tooth 10" bore 15" CLUTCH 20"OD-118T Light Weight 10" 306 12 Bolt Holes MC 23509709 23509709 60 Series Flat 118 tooth 10" bore 15” CLUTCH 20”OD-118T Standard 10" 306 12 Bolt Holes FORD MW1WAE7HZ6375A E7HZ6375A 6.6L / 7.8L Diesel Flat 138 tooth 14" CLUTCH FLAT 8BLT 17" OD 138T 7.50" 206 / 305 8 Bolt Holes MACK/ VOLVO MW1WA530GB3145BM 530GB3145BM E7 Flat w/timing marks 118 tooth 15X9 10"& TIM MK 6B &1DP 20" 118T 10" 306 6 Bolt Holes & 1 Dowel MW1WA530GB3170M 530GB3170M E7 E-Tech Flat 117 tooth 2 notched 15X9 10"& TIM MK 6B &1DP 20" 117T 10" 306 6 Bolt Holes & 1 Dowel MW1WA20730056 20730056 VED12 Flat 153 tooth 15" CLU 14BLT & 1 DP 19.5" OD 153T 10" 306 14 Bolt Holes & 1 Dowel MW1WA905-10-4168 21184666 ISHIFT VOLVO D13/ MDRIVE MACK MP8 Automatic Transmission 10” Bore 153 Tooth 10" - 14 Crank Mounting Bolts, 12 Clutch mounting bolts NAVISTAR MW1WA1809144C91 1809144C91 6.9L / 7.3L Flat 137 tooth 13" OR 14" CLUTCH 9BLT 17" OD -137T 7.25" 205 9 Bolt Holes MW1WA1810855C93* 1810855C93 DT466 A-B-C- Flat 138 tooth (1975-1996) 14" CLUTCH 8BLT 17"OD -138T 7.25" 205 8 Bolt Holes MW1WA1818214C91 1818214C91 7.3L / 444E Flat 137 tooth 13" OR 14" CLU 10BLT 17" OD 137T 7.25" 206 / 305 10 Bolt Holes MW1WA1821915C91* 1821915C91 DT466E Flat 138 tooth 14" CLUTCH 12BLT 17"OD 138T 7.25" 0 12 Bolt Holes MC AT175X1 1 3/4” OD, 1” Pilot MC AT-200-10 2” OD, 1 1/4” Pilot, 10 Splines, 7.3” Long MC AT-200-14 14 Spline MC AT-200-18 18 Spline MC AT-200-24 24 Spline MC AT175 1 3/4” OD, 1 1/4” Pilot, Spline 7.375” Long Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 11Clutch Guide New 6 Eaton Differentials Tandem Front Ref. # Single or Tandem Rear Ref. # GENDSP40-336 GENDS404-336 GENRSP40-336 GENRS404-336 GENDSP40-355 GENDS404-355 GENRSP40-355 GENRS404-355 GENDSP40-370 GENDS404-370 GENRSP40-370 GENRS404-370 GENDSP40-390 GENDS404-390 GENRSP40-390 GENRS404-390 Bold Part Numbers are Stocking Units I-Shift Transmissions Part # Description Max Torque Gears Generation Application GENAT2512C Automatic Transmission 2500 12 III AND IV Standard GENATO2512C Automatic Transmission w/ Overdrive 2500 12 III AND IV Standard GENAT2612D Automatic Transmission 2600 12 V AND EEV Standard GENATO2612D Automatic Transmission w/ Overdrive 2600 12 V AND EEV Standard GENAT2612D-HD Automatic Transmission 2600 12 V AND EEV Heavy Duty GENATO2612D-HD Automatic Transmission w/ Overdrive 2600 12 V AND EEV Heavy Duty GENATO3112C Automatic Transmission w/ Overdrive 3100 12 III AND IV Standard GENATO3112D Automatic Transmission w/ Overdrive 3100 12 V AND EEV Standard GENATO3112D-HD Automatic Transmission w/ Overdrive 3100 12 V AND EEV Heavy Duty Rockwell Differentials Tandem Front Single or Tandem Rear GENRD20145-342 GENRR20145-342 GENRD20145-358 GENRR20145-358 GENRD20145-373 GENRR20145-373 GENRD20145-390 GENRR20145-390 Eaton-Fuller Transmissions Part # Description GENFRO16210CP 10 Speed GENRTLO16713AP 13 Speed GENRTLO18913AH 13 Speed GENRTLO18718BP 18 Speed GENRTLO18918BH 18 Speed GENRTO16908LLP 8 Speed Plus 2 Deep Reduction Speeds If part number ends with: H - Halo Installed (plug kits included) P - Pump Installed - ready for external cooler HD4560 Allison Transmission HD3500 Allison Transmission Factory Authorized Remanufacturer 36 Month/Unlimited Miles Warranty Bold Part Numbers are Stocking Units Phone 773-247-6900 | Fax 773-247-2632 ur remanufactured rkmanship for the plication. e, at General Truck nt. Any component e original warranty administered only You must contact 1 for authorization gible for warranty urred as a result of oper application or mponents that may s, etc… arts, Inc. and shall e conditions stated y failed component replacement. Any s, Inc. and may be ned to be a non- REMAN UNITS IONS ipment is ssions and rebuilt and none. We test our state-of- ion mechanics ndustry. ALS ipment is the differential expert for ustrial, agricultural, construction, mining ks and equipment. General Truck Parts and and medium duty differentials and parts. ual Transmissions rentials 4040 W. 40th Street | Chicago, IL 60632 | www.GeneralTruckParts.com | Toll Free 800-621-3914 | Phone 773-247-6900 | Fax 773-247-2632 This warranty covers parts and labor to repair or replace, at General Truck Parts, Inc.’s option, the failed remanufactured component. Any component repaired or replaced will retain the remainder of the original warranty period. General Truck Parts, Inc. nationwide warranty may be administered only by one of our approved warranty repair facilities. You must contact General Truck Parts, Inc. at 1-800-621-3914 Ext. 2581 for authorization prior to any repairs being made in order to be eligible for warranty coverage. This warranty shall not extend to failures or damage incurred as a result of improper installation, improper lubrication, abuse, improper application or improperly installed accessories or other attached components that may be worn or failed, i.e. drive shafts, yokes, power takeoffs, etc… All warranty claims shall be made to General Truck Parts, Inc. and shall be supported by satisfactory evidence in respect of the conditions stated herein. General Truck Parts, Inc. reserves the right to have any failed component returned to our facility for inspection prior to repair or replacement. Any freight incurred will be prepaid by General Truck Parts, Inc. and may be billed back to your account if the failure is determined to be a non- warrantable failure. a supplier of manual transmissions and transfer case products, both rebuilt and new. Our quality is second to none. We test all rebuilt transmissions on our state-of- the-art dynonometer. Our union mechanics are some of the best in the industry. DIFFERENTIALS General Truck Parts and Equipment is the differential expert for on-highway, off-highway, industrial, agricultural, construction, mining and logging heavy duty trucks and equipment. General Truck Parts and Equipment also carries light and medium duty differentials and parts. 2 Year Warranty — Manual Transmissions 1 Year Warranty — Differentials OE QUALITY TRANSMISSIONS & DIFFERENTIALS WARRANTY Manual & Automated Manual Transmissions: 36 Months/Unlimited Miles Differentials: 36 Months/Unlimited Miles Transfer Cases: 6 Months/Unlimited Miles Off highway/Hydraulic Components: 6 Months/ Unlimited Miles SAME DAY OR NEXT DAY SHIPPING With an extensive inventory on-hand and ready to ship, most orders will be shipped the day of order if the order is received before 12 Noon (CST). Orders received after 12 Noon (CST) will be processed and shipped the following business day. (Note: This applies to common products. Specialty items may have longer lead times). Midwest Wheel is your Heavy Duty Drivetrain Supplier Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 11Clutch Guide New 7 GEAR OIL FOR TRAILER HUBS SH 550032647 5 Gallon SH 550045337 1 Gallon SH 550032968 55 Gallon Special Order Shell Spirax ® S6 ATF A295 For Allison Automatic Transmissions. Premium Synthetic Technology Multi-Vehicle Automatic Transmission Fluid. Spirax ® S6 GME 40 Eaton approved synthetic transmission fluid for manual Fuller Transmissions. Shell Spirax ® S6 AXRME 75W-90 Synthetic, long life axle and manual transmission oil. Recommended for use in all rear axles. SH 550026915 5 Gallon SH 550026914 16 Gallon SH 550026918 55 Gallon Special Order SH 550044797 5 Gallon SH 550044799 16 Gallon SH 550044796 55 Gallon Special Order LUCLUC10043 qt 85/140 plus LUCLUC10066 5 gallon 80/90 LUCLUC10072 5 gallon 75W/90 Synthetic LUBRICANTS Input Yoke Yoke P/N Strap Kit Input Nut Input Seal 1710 Full Round SD16-4-9031X - MW1127589 MW1127591 1710 Half Round SD16-4-9031-1X SD16.5-718X SPL170 Half Round SD1170-4-261-1X SD1170-70-18X SPL90 Half Round SD190-4-251-1X SD190-70-28X Breather Kit: H6 507162 GENRSP40-XXX, RD404-XXX Eaton Rear Rear End Breather Kit: H6 507162 Input Yoke Yoke P/N Strap Kit Input Nut Input Seal 1710 Half Round SD16-4-6391-1X SD16.5-70-18X MW140X1237 RI A11205Z2730 GENRR20145-XXX Meritor Rear Rear End Breather Kit: H6 507162 Input Yoke Yoke P/N Strap Kit Input Nut Input Seal 1810 Half Round SD16.5-4-3381-1X SD16.5-70-18X MW140X1233 RI A11205X2728 1810 Full Round SD16.5-4-3381X - 1760 Half Round SD16.3-4-331-1X SD16.5-70-18X Output Yoke Yoke P/N Output Nut Output Seal 1710 Half Round SD16-4-6371-1 MW140X1237 R1 A11205Y2729 SPL170 Half Round SD1170-4-741-1X GENRD20145-XXX Meritor Front Rear End Output Yoke Yoke P/N Output Nut Output Seal 1710 Half Round SD16-4-9231-1X - H6 K2918 1760 Half Round SD16.3-4-161-1X 1760 Full Round SD16.3-4-1681 1810 Half Round SD16.5-4-4631-1X 1810 Full Round SD16.5-4-4631 SPL250 Half Round SD1250-4-271-1X Eaton/Fuller Transmissions All w/10 Spline Shaft Input Yoke Yoke P/N Strap Kit Input Nut Input Seal 1810 Full Round SD16.5-4-4571X - MW1128049 MW1127591 1810 Half Round SD16.5-4-4571-1X SD16.5-70-18X 1760 Full Round SD16.3-4-5221X - 1760 Half Round SD16.3-4-5221-1X SD16.5-70-18X SPL170 Half Round SD1170-4-201-1X SD1170-70-18X SPL250 Half Round SD1250-4-81-1X SD1250-70-18X Output Yoke Yoke P/N Output Nut Output Seal 1710 Full Round SD16-4-9041X MW1127588 MW1127592 1710 Half Round SD16-4-9041-1X SPL170 Half Round SD1170-4-221-1X GENDSP40-XXX, DD404-XXX Eaton Front Rear End Breather Kit: H6 507162 SENTINEL ESP FILTERED VENT ST 359-6137 Drive Axle Vent (3/8” adapter) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

06Ideal Hose Clamps130004202021 CLAMPS & HOSE PRODUCTS • Eliminates over-inhibited cooling systems • Reduces cost • Minimizes waste NEED RELEASE ® Extended Service Coolant Filter P/N Min Dia. Max Dia. IDL62040 51 7/32” 5/8” IDL62060 51 1/4 25/32 IDL5706 051 7/16 25/32 IDL5708 051 1/2 29/32 IDL5710 051 9/16 1-1/16 IDL5712 051 11/16 1-1/4 IDL5716 051 13/16 1-1/2 IDL5720 051 13/16 1-3/4 IDL5724 051 1-1/16 2 IDL5728 051 1-5/16 2-1/4 P/N Min Dia. Max Dia. IDL6506E 51 9/16” 13/16” IDL6508E 51 11/16 15/16 IDL6510E 51 13/16 1-1/16 IDL6512E 51 15/16 1-1/4 IDL6516E 51 13/16 1-1/2 IDL6520E 51 13/16 1-3/4 IDL6524E 51 1-1/16 2 IDL6528E 51 1-5/16 2-1/4 IDL6532E 51 1-9/16 2-1/2 IDL6536E 51 1-13/16 2-3//4 IDL6540E 51 2-1/16 3 P/N Min Dia. Max Dia. IDL47010 51 13/16” 1-1/16” IDL47012 51 15/16 1-1/4 IDL47016 51 13/16 1-1/2 IDL47020 51 13/16 1-3/4 IDL47024 51 1-1/16 2 IDL45200 51 1-1/4 2-1/8 IDL45250 51 1-3/4 2-5/8 IDL45300 51 2-1/4 3-1/8 IDL45350 51 2-3/4 3-5/8 General Purpose Lined Clamps Constant Torque P/N Min Dia. Max Dia. IDL5732 051 1-9/16 2-1/2 IDL5736 051 1-13/16 2-3/4 IDL5740 051 2-1/16 3 IDL5744 051 2-5/16 3-1/4 IDL5748 051 2-9/16 3-1/2 IDL5752 051 2-13/16 3-3/4 IDL5756 051 3-1/16 4 IDL5764 051 3-9/16 4-1/2 IDL5772 051 1-7/8 5 IDL5796 051 3-5/8 6-1/2 UNIVERSAL 3-WAY TEST STRIPS P/N NA TS200 • Designed for all heavy duty coolant types, including extended life coolant • Effectively tests freeze point, contamination & chemical protection and SCA (nitrate) concentrations CATALOG NUMBER 06 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ INSULONE ® HEATER HOSE Designed for heater hose applications with resistance to high underhood temperatures. Temperature Range: -40°F to 257°F (-40°C to 125°C) P/N ID (in.) DY 80314 5/8 DY 80316 3/4 DY 80319 1 Silicone heater hose is used for coolant transfer applications and higher temperature service. Temperature Range: -65°F to 350°F SAE Specifications: 20R3, Class A P/N ID (in.) DY 80251GL 5/8 DY 80252GL 3/4 DY 80254GL 1 GOLD LABEL ® SILICONE HEATER HOSE 50 FT. ROLLS HEATER HOSE (sold by the foot) STANDARD HEATER HOSE Designed for heater hose applications where resistance to antifreeze coolants and underhood temperatures is required. Temperature Range: -40°F to 257°F (-40°C to 125°C) SAE Specifications: Similar to SAE 20R3 P/N ID (in.) DY 80259 3/8 DY 80270 1/2 DY 80271 5/8 DY 80273 3/4 BLUE HEATER HOSE WITH XTREME HEAT TECHNOLOGY Designed for heater hose applications that are exposed to higher underhood temperatures and require a higher heat resistance. Temperature Range: -40°F to 300°F (-40°C to 149°C) SAE Specifications: SAE 20R3 Class D3 HT EC Branding: Continental Blue Xtreme ID, SAE J20R3-HT-D3-EC, Made in U.S.A. P/N ID (in.) GY 65028 3/8 GY 65029 1/2 GY 65031 5/8 GY 65033 3/4 GY 65035 1 GY 65037 1-1/4 HOSE BARB FITTINGS BELTS Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

15Radios All012209142021 CATALOG NUMBER 15 www.midwestwheel.com Order NLINE ™ www.midwestwheel.com Order NLINE ™ • 40 CB Channels with Channel Scan • 10 NOAA Weather Channels • Instant Channels 9 & 19 • SoundTracker ™ Noise Reduction System • Simultaneously Monitor 2 Channels with Dual Watch • 29 LX Full Featured 4-color LCD CB Radio • 4 Color Programmable LCD Display • Instant Channel 9/19 • Talk-back • Frequency Display • All Channel Scan • 10 Channel NOAA Weather with All Hazards Alert • Comes in special 4-color Gift Box 18WXSTII COMPACT CB/WEATHERBAND RADIO WX INDICATOR P/N D8 COB 18WXST2 29LX CB RADIO P/N PAN29LX Your Link to Over 30 Million CBs in Use Today! 19DX IV COMPACT CB RADIO WITH DYNAMIC MIC P/N D8 COB 19DX4 • 40 CB Channels • 4 Watts RF Power • Digital Signal Strength Meter • PA System 29LTD CLASSIC CB RADIO P/N D8 COB 29LTD • 40 CB Channels • Full RF Power Output • 9’ Microphone Cord • SWR Calibration • Front Panel Microphone Connector $53.59 $115.49 25LTD FULL POWER CLASSIC CB RADIO P/N D8 COB25LTD • 40 CB Channels • Full RF Power Output • 9’ Microphone Cord • Front Panel Microphone Connector $102.49 29 LX MAX PROFESSIONAL SMART CB RADIO W/ 4-COLOR DISPLAY P/N D8 29LXMAX • Cobra iRadar ® App Integration • Legal Hands-Free Phone Calls and Text Messaging • Rewind-Say-Again ® Missed Transmission Re- play and Memo Recording • 10 Channel NOAA ® Weather Receiver and Alert • NightWatch ® Illumination and 4-Color LCD Display $241.29 $81.89 $132.29 CBs • Radios • Accessories • Bluetooth ® Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 15Radios All012209142021 ANTENNAS • Mount horizontal mirror arm or rail, vertical mirror arm or rail or flat vertical side • 3-Way Stainless Steel Mount • 18 Ft. coaxial cable MAGNETIC ANTENNA MOUNT TWIST-ON PL-259 COAX CABLE CONNECTORS RG-58A/U, RG-59A/U & RG-8X HTST6-259 $1.69 • An easy to install PL-259 connector • No crimping tools needed ANTENNA ACCESSORIES CHROME PLATED STEEL SPRINGS HTSR-3H $7.29 Heavy Duty, 3/8”-24 threads For antennas up to 5' HTSR-8A $13.99 9’ Coax Cable HTSK-8A $16.99 18’ Coax Cable HTSR-9A $25.49 9’ Co-Phase Cable HTSK-9A $31.49 18’ Co-Phase Cable PL/PL/PL COAX CABLE HTSK-4A $5.49 Heavy Duty H.D. Aluminum Bracket • Supports antennas up to 5’ length • Single or dual antenna installations • K-4A antenna stud mount included • 2.5” T x 2” W Stainless Steel 3-Way Bracket • For horizontal or vertical mounting • For antennas up to 5’ Aluminum Bracket • For single or dual antenna mounting • For antennas up to 5’ HTSSS-64A $15.99 PANPS322 $7.29 • Mount horizontal mirror arm or rail, vertical mirror arm or rail or flat vertical side • 3-Way Stainless Steel Mount • 18 Ft. coaxial cable MICROPHONE DYNAMIC CB SPEAKER HTSK-11 $31.99 • The strongest magnet mount! • 4.9” base • 18’ FireFlex coaxial cable included • For use with Firestik & Firestik II antennas up to 3’ long MOUNT KITS ANTENNA MOUNTING ACCESSORIES MIRROR MOUNTING BRACKETS LOWER PRICES! SINGLE MIRROR MOUNT KITS DUAL MIRROR MOUNT KITS • Heavy duty CB antenna • Hi-performance loading coil maximizes the transmit/receive functions of your CB HEAVY DUTY STUD MOUNTS • Screw-on style • For 1/2” hole • Heavy duty, hi- performance CB antenna • Quick & easy to tune ORIGINAL FIRESTIK ® TUNABLE TIP FIRESTIK ® II Premium Dynamic 4-pin Replacement CB Microphone Black Price 2' Antenna HTSFS2B $15.99 3' Antenna HTSFS3B $16.99 4' Antenna HTSFS4B $17.99 White Black Price 2' Antenna HTSKW2W HTSKW2B $12.99 3' Antenna HTSKW3W HTSKW3B $13.99 4' Antenna HTSKW4W HTSKW4B $15.99 White Black Price 3' Kit HTSKW3-DMK-W HTSKW3-DMK-B $86.99 4' Kit HTSKW4-DMK-W HTSKW4-DMK-B $89.99 White Black Price 3' Kit HTSKW3-SMK-W HTSKW3-SMK-B $39.99 4' Kit HTSKW4-SMK-W HTSKW4-SMK-B $42.99 D8 HGM73 • 9 Foot Cord • Wire mesh grille • Heavy-duty ABS shell • 4-pin connector Premium 4-pin Power Microphone D8 HGM75 • 2 Transistor Amplifier • 9 Foot Cord • Wire mesh grille • Heavy-duty ABS shell • 4-pin connector $20.99 $16.99 PANJBC995H $7.79 • Designed to offer an unheard of combination of unsurpassed power handling, great sound, rugged construction and stunning looks • 15 watt power • 4" speaker with 5.5 oz magnet • Shock-resistant construction • 180º ratcheted swivel mounted bracket • Earpiece jack for team drivers • 2 year warranty HighGear ™ by Cobra External Speaker D8 HG S100 $18.95 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 15Radios All012209142021 D8 CPI1500W 1500 Watts Continuous Power 3000 Watts Peak Power D8 CPI2500W 2500 Watts Continuous Power 5000 Watts Peak Power What’s Included: • Cobra CPI1500W Power Inverter • 48-inch #4 AWG Power Cables • Terminal Protector Boots • Quick Start Guide What’s Included • Cobra CPI2500W Power Inverter • (4) 48-inch #4 AWG Power Cables • Terminal Protector Boots • Quick Start Guide • Rand routing – With advanced lane guidance and split-screen junction view • Truck POIs – Travel centers, truck service locations • Weather – Ten different map overlays to view conditions along your route • Lifetime Traffic Everywhere – Covers major truck routes, plus local roads in urban areas • Dash cam on board – Just hit record • Preloaded trucking apps – Fuel manager, accounting, load board, document imaging • Fuel logs – Calculate current and average fuel economy • Live fuel prices – Sort by price, distance, or brand • Toll costs – View estimated toll costs and compare routes without tolls • Mileage – Record mileage and view by date or by state/province • Off the clock, when it’s time for a break, just take the TND Tablet 80 from the magnetic mount and kick back - check e-mail, browse the web, read the news, stream movies, download games BLUE TIGER ADVANTAGE PLUS HEADSET TND ™ TABLET 80 Advanced truck GPS + 8" Android tablet P/N PANTND-TABLET The 8” truck tablet features award-winning truck-specific navigation, on-board dash camera, pre-loaded trucking apps, and more. POWER INVERTER WITH FAST CHARGE USB PAN17-150401-1 Blue Tiger’s most rugged headset. Built to military standards for ruggedness and durability. • Color: Black • Noise Cancellation: 97% • Talk Time: 36 hrs. • Standby Time: 1,000+ hrs. • Weight: 3.2 oz. • Fit: On-Ear • Multi-Media Support: Yes • Smart Assistant Enabled: Yes • Range: Up to 100 ft. • Bluetooth: 5.0 • Convertible: No • Military Grade: Yes • Warranty: 1 Year CELL PHONE / TABLET MOUNTS MobNetic Pro 90 MOBMOBN-PRO-BLK Mobnetic plate attaches onto your phone to magnetically hold your phone onto the mount using a 90-lb pull force rare earth magnet TABNETIC PRO MOBTABN-PRO 290-lb pull-force magnets Rotates 360° and tilts a full 90° for ultimate articulation and custom display angles UNIQUE DOUBLE MAGNET MOUNT $120.99 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==

00Agricultural Catalog130003222021 WE STOCK A FULL LINE OF HEAVY DUTY TRUCK PARTS! MAXIMUM HEAVY DUTY QUALITY BRAKE RELINE Relined in the USA Ask about our MAX HD Brake Stop Boxes High Quality Brake hardware is included in the box to insure your MAX HD Brake reline gives you maximum life and performance to your wheel end. ® AGRICULTURAL PRODUCTS CATALOG CATALOG NUMBER 00 www.midwestwheel.com NLINE www.midwestwheel.com Order NLINE ™ AGRICULTURAL WHEELS. ................................2 AGRICULTURAL HUBS & SPINDLES. ............ 3-5 BRAKE DRUMS & ASSEMBLIES.......................5 HEAVY DUTY TOWING SYSTEM........................6 JACKS & COUPLERS. .......................................7 TRUCK BED LIGHTS. ........................................7 WARNING & SAFETY LIGHTS. ....................8, 16 LED WORK LAMPS..................................... 9-10 SIGNAL LIGHTING. ................................... 10-11 BACK-UP ALARMS.........................................11 CAMERA SYSTEMS........................................12 BATTERIES............................................... 12-13 HYDRAULIC HOSE..........................................14 PTO/WET LINE KITS................................. 15-16 CHEMICALS....................................................16 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 2 AGRICULTURAL WHEELS 4-Bolt Mounting • 5” Bolt Circle • 3.62” Pilot P/N Reference Size Offset Approx. Capacity FH 4137500508 AM W40012 14 x 5 3/8- 1,250 AM W51812 103639 15 x 4.5 3/8- 1,250 AM W52112 104072 15 x 6 3/8- 1,250 5-Bolt Mounting • 5.5” Bolt Circle • 4” Pilot NTI1585000301 - 10 x 6 0 1,330 AM W40318 105562 14 x 5 1/4- 2,000 AM W40420 105563 14 x 6 1/4- 2,000 AM W51522 102597 15 x 5 1/4- 2,200 AM W52220 103741 15 x 6 1/4- 2,200 FH 41585800508 AM W52420 15 x 8 1/4- 2,200 FH 100540 - 16 x 4.5 25/64+ 2,000 FH 100550 - 16 x 5.5 5/8+ 2,000 6-Bolt Mounting • 6” Bolt Circle • 4-5/8” Pilot NTI4414700301 105398 10 x 6 0+ 1,535 AM W41028 105398 14 x 6 1-1/8+ 2,800 AM W41328 106630 14 x 8 1-1/8+ 2,800 AM W51624 102131 15 x 5 1-1/8+ 2,400 AM W50133 105389 15 x 6 1-1/8+ 3,300 AM W518728 105559 15 x 6 +2 2,800 AM W50334 106589 15 x 8 1-1/8+ 3,800 AM W54735 106637 15 x 8 .156+ 3,500 AM W50534 106809 15 x 10 1-1/8+ 3,800 FH 107782 - 16 x 4.5 1-27/32+ 2,300 AM W62435 106307 16 x 6 1-1/8+ 3,500 AM W66835 106805 16 x 8 1/4+ 3,800 AM W64635 106794 16 x 8 1-1/8+ 3,800 AM W64835 106935 16 x 10 1-1/8+ 3,500 AM W64038 106931 16.1 x 11 1-1/8+ 3,800 AM W64938 107254 16.5 x 8.25 1-1/16+ 3,800 AM W64938V 107254 w/ valve guard 16.5 x 8.25 1-1/16+ 3,800 AM W66038 107460 16.5 x 9.75 1-1/8+ 3,800 FH 051623700508 - 17 x 8 1-1/8+ - FH 106960 106960 20 x 7 1-1/8+ 3,500 8-Bolt Mounting • 8” Bolt Circle • 6” Pilot P/N Reference Size Offset Approx. Capacity AM W51150 107174 15 x 8 1-1/8+ 5,000 AM W51350 107173 15 x 10 1-1/8+ 5,000 AM W60355 106832 16 x 8 1-1/8+ 5,500 AM W60455 106897 16 x 8 1/4+ 5,500 AM W60555 106939 16 x 10 1-1/8+ 5,500 AM W65360 106990 16 x 10 3/8+ 6,000 AM W614860 106870 16.1 x 11 1-1/8+ 6,000 AM W69460R 106899 16.1 x 11 1-1/2- 6,000 AM W64460 106987 16.1 x 11 3/8+ 6,000 AM W623180 108197 16.1 x 14 1-1/8+ 8,000 AM W617460 108182 16.1 x 14 3/8+ 6,000 AM W619580 107760 16.1 x 16 1.125+ 8,000 FH 108307 - 16.1 x 18 3/8+ 8,000 AM W63660 107235 16.5 x 8.25 3/8+ 6,000 AM W63660V 107235 w/ Valve Guard 16.5 x 8.25 3/8+ 6,000 AM W63760 107188 16.5 x 9.75 3/8+ 6,000 AM W63760V 107188 w/ Valve Guard 16.5 x 9.75 3/8+ 8,000 AM W683260RP78 - 16.5 x 9.75 1.13- 6,000 FH 052124000508 - 17 x 8 1-1/8+ - AM W24460 - 20 x 8 1.50- 6,000 AM W20560R 107489 20 x 8 1-1/8+ 6,000 AM W27760 - 22.5 x 8.25 1-1/2- Chamfered 6,000 AM W256000RP10 - 22.5 x 8.25 1.50- 6,000 AM W27860 - 22.5 x 11.75 1/2- Chamfered 6,000 AM W217100 - 22.5 x 11.75 HD 1/2- Chamfered 8,000 AM W213960 - 22.5 x 11.75 1.125- Chamfered 6,000 AM W22-00700R - 22.5 x 13 0 10,000 AM W210980 - 22.5 x 13.5 .281+ Chamfered 8,000 AM W211900 - 22.5 x 13.5 1.00- Chamfered 8,000 AM W217080 - 22.5 x 13.5 1.50- 8,000 AM W241860 - 24.5 x 8.25 1.50- Chamfered 6,000 8-Bolt Mounting • 10.827” Bolt Circle • 8.71” Pilot AM W22-08200R 22.5 x 13 0 10,000 10-Bolt Mounting • 11-1/4” Bolt Circle AM W224200 22.5 x 13.5 8.71” Pilot +0” Straight 10,000 AM W22-03114RP10 22.5 x 13.5 9.02” Pilot 1-1/2- Chamfered 14,000 Double Bevel Rims - Universal Drivers P/N Size CA 0507565 16 x 38 HOW TO MEASURE WHEEL OFFSET… Offset is the distance between the mounting side of the center disc and the rim centerline. Positive offset is when the disc is on the outside of the centerline. Negative offset is when the disc is on the inside of the centerline. Backside Backside Backside Outside Outside Outside Positive Offset Zero Offset Negative Offset Wide Base Rims with Attached Clamps P/N Size No. Clamps Clamp Type Bolt Circle AM 106501 28 x 10 6 G 24-1/4” Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 3 Hub Assembly Spindle Assembly P/N: AM 124200-4 Reference: 104911 P/N: AM S5110E-00 (1-5/8” x 10) Reference: 103847 P/N Description P301801 Washer P251701 Nut P401901 Cotter Pin Kit Includes: P/N Description L67010 Cup - Inner LM11910 Cup - Outer P101301 Bolts - 4 P502006 Cap LM67048 Cone - Inner LM11949 Cone - Outer P602105 Seal Kit Includes: Hub Assembly Spindle Assembly P/N Description LM501310 Cup - Inner LM67010 Cup - Outer P101303 Bolts - 6 P502002 Cap LM501349 Cone - Inner LM67048 Cone - Outer P602114 Seal Kit Includes: P/N Description P301803 Washer P251703 Nut P401901 Cotter Pin Kit Includes: P/N: AM S5113F-00 (11) Reference: 106169A P/N: AM S5113I-16 Reference: 106169R P/N: AM 356200-6 Reference: 106686 Hub Assembly Spindle Assembly P/N Description LM48510 Cup - Inner LM67010 Cup - Outer P151404 Bolts - 5 P201602 Nuts - 5 P502002 Cap LM48548 Cone - Inner LM67048 Cone - Outer P602106 Seal Kit Includes: P/N Description P301803 Washer P251703 Nut P401901 Cotter Pin Kit Includes: P/N: AM 255200-5 Reference: 104682 P/N: AM S5111G-10 (1-3/4 x 12-5/16) Reference: 105708K Spindle Assembly Hub Assembly P/N Description L44610 Cup - Inner LM11710 Cup - Outer P943301 Bolts - 4 P943401 Lockwashers - 4 P502013 Cap L44643 Cone - Inner LM11749 Cone - Outer P602123 Seal Kit Includes: P/N Description P301801 Washer P215701 Nut P101905 Cotter Pin Kit Includes: P/N: AM 084200-4 Reference: 106695 P/N: AM S5202B-16 (1-1/4 x 7-1/2) Reference: 105085B No. 12-4LM 1,250 lb. Rated Capacity • Mounting - 4-Bolt, 5” Bolt Circle • 3-5/8” Pilot AGRICULTURAL HUBS & SPINDLES No. 35-6LM 3,500 lb. Rated Capacity • Mounting - 6-Bolt, 6” Bolt Circle • 4-5/8” Pilot No. 25-5LM 2,500 lb. Rated Capacity • Mounting - 5-Bolt, 5-1/2” Bolt Circle • 4” Pilot No. 8-4LM 800 lb. Rated Capacity • Mounting - 4-Bolt, 4” Bolt Circle • 2-1/2” Pilot Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 4 AGRICULTURAL HUBS & SPINDLES , CONTINUED Spindle Assembly Hub Assembly No. 633-EWC 1,500 lb. Rated Capacity • Mounting - 4-Bolt, 5” Bolt Circle • 3.62” Pilot P/N Description LM67010 Cup - Inner LM11910 Cup - Outer P101301 Bolt LM67048 Cone - Inner LM11949 Cone - Outer P602111 Seal P502003 Hub Cap P301802 Spindle Washer P251703 Spindle Nut P401905 Spindle Cotter Pin Kit Includes: P/N Description P301806 Washer P251706 Nut P401902 Cotter Pin Kit Includes: P/N: AM S5101-D10 (1-5/8 x 9-5/16) Reference: - P/N: AM 633200-4 Reference: - No. 88-EWC 3,560 lb. Rated Capacity • Mounting - 6-Bolt, 6” Bolt Circle • 4.62” Pilot Hub Assembly Spindle Assembly P/N Description JL69310 Cup - Inner LM67010 Cup - Outer P101301 Bolts P201601 Nut - 8 P502007 Hub Cap JL69349 Cone - Inner LM67048 Cone - Outer P602103 Seal Kit Includes: P/N Description P301804 Washer P251705 Nut P401901 Cotter Pin Kit Includes: P/N: AM 888200-6 Reference: - P/N: AM S8131G-16 (1-3/4 x 12-1/2) Reference: - No. 60-8LM 6,000 lb. Rated Capacity • Mounting - 8-Bolt, 8” Bolt Circle • 6” Pilot Spindle Assembly Hub Assembly P/N Description JLM506810 Cup - Inner LM501310 Cup - Outer P151402 Bolts - 8 P201607 Nut - 8 P502008 Cap JLM506849 Cone - Inner LM501349 Cone - Outer P602116 Seal Kit Includes: P/N Description P301806 Washer P251706 Nut P401902 Cotter Pin Kit Includes: P/N: AM 608200-8 Reference: 107013 P/N: AM S5116I-00 (2-3/4 x 14) Reference: 107007A P/N: AM LS5116K-08 (2 -3/4 x 16-1/4) Reference: - P/N: AM 608201-8 (drilled for drum) No. 75-88LM 8,000 lb. Rated Capacity • Mounting - 8-Bolt, 8” Bolt Circle • 6” Pilot Spindle Assembly Hub Assembly P/N Description 382-A Cup - Inner LM501310 Cup - Outer P151407 Bolts - 8 P201607 Nut - 8 P502008 Cap 387-AS Cone - Inner LM501349 Cone - Outer P602122 Seal Kit Includes: P/N Description P301806 Washer P251706 Nut P401902 Cotter Pin Kit Includes: P/N: AM 758200-8 P/N: AM 758271-8 (long stud) Reference: 107894 P/N: AM S5199K-00 (3 x 16) Reference: 107896A P/N: AM 758201-8 (drilled for drum) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 5 No. 871 12,000 lb. Rated Capacity • Mounting - 10-Bolt, 11.25” Bolt Circle • 8.65” Pilot Spindle Assembly Hub Assembly P/N Description 39520 Cup - Inner 453A Cup - Outer 39585 Cone - Inner 460 Cone - Outer P151409 Wheel Stud P/N Description P602128 Grease Seal P602150 Gasket P502016 Hub Cap P201630 3/4 Flange Nut P943303 Hub Cap Bolt Kit Includes: P/N Description P301808 Washer P251702 Nut P401904 Cotter Pin Kit Includes: AGRICULTURAL HUBS & SPINDLES , CONTINUED 13” Free Backing Hydraulic Brake Assemblies Brake Drums DC 01971 Right Hand DC 01970 Left Hand Bolt Hole Pattern - 4 on 4.813” DC 03532 8 Bolt 5-1/2” Bolt Circle 4-3/8” Pilot Circle DC 03941 8 Bolt 5-1/2” Bolt Circle 4-1/2” Pilot Circle DC 03940 6 Bolt 5-1/2” Bolt Circle 4-3/8” Pilot Circle DC 07324 6 Bolt 8-1/4” Bolt Circle 6” Pilot Circle AGRICULTURAL BRAKE DRUMS 10 x 2-1/4 Electric Brake Assembly DX K23-026-00 Brake Kit - LH DX K23-027-00 Brake Kit - RH 12 x 2 Electric 5.2K CSA Brake Assembly DX K23-105-00 Brake Kit - LH DX K23-106-00 Brake Kit - RH 12 x 2 Electric 7K Nev-R-Adjust ® DX K23-464-00 Brake Kit - LH DX K23-465-00 Brake Kit - RH 12 x 2 Electric 7K Brake Assembly DX K23-180-00 Brake Kit - LH DX K23-181-00 Brake Kit - RH COMPLETE BRAKE ASSEMBLIES U.S. Made OE Replacement HUBS & DRUMS BRAKE SHOE & LINING KITS DX K71-048-00 12 x 2 Brakes (DQX 5.2K CSA) DX K71-046-00 10 x 1-1/2 Electric Brakes DX K71-127-00 12 x 2 Electric Brakes (6K CSA, 7K) DX K71-047-00 10 x 2-1/4 Electric Brakes (Shoes Only) DX K71-049-00 (LH) K71-050-00 (RH) 12-1/4 x 3-3/8 Electric Brakes (8K, 9K, 10K GD) DX K71-503-00 (LH) K71-502-00 (RH) 12-1/4 x 5 Electric Brakes (12K-15K) DX K71-497-00 (LH) K71-496-00 (RH) 12-1/4 x 2-1/2 Electric Brakes (7.2K) DX K71-499-00 (LH) K71-498-00 (RH) 12-1/4 x 3-3/8 Electric Brakes (8K, 9K, 10K GD) Studded Bolt Circle Inner Outer RT BT12-4* 4-4.0 L44643 L44643 RT BT12-5* 5-4.50 L44643 L44643 DX K08-248-90* 5-4.50 L68149 L44649 DX K08-201-90 6-5.50 25580 LM67048 DX K08-213-90* 6-5.50 25580 LM67048 DX K08-219-90 8-6.50 25580 14125A *Idler hubs DX K71-104-00 Fits Dexter 10 x 2-1/4 brakes DX K71-105-00 Fits Dexter 12 x 2 brakes MAGNET KITS P/N: AM 871200-10 Reference: - P/N: AM S5195-L12 (3-1/8 x 17-3/8) Reference: - P/N: AM 871223-10 (drilled for drum) P/N Plate Dimensions Pilot Hole WT (lbs.) DC 54988 . 25” x 4.25” x 4.25” - 4 on 4.813” 2 1/2” .91 DC 60124 . 25” x 4.25” x 4.25” - 4 on 4.813” 2 3/4” .91 DC 52415 . 25” x 4.25” x 4.25” - 4 on 4.813” 3” .84 DC 61715 . 25” x 4.25” x 4.25” - 4 on 4.813” 3 1/4” .76 DC 59911 . 25” x 4.25” x 4.25” - 4 on 4.813” 3 1/2” .65 BACKING PLATE BRACKETS * *Special Order Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 6 INDUSTRIAL STRENGTH BAKED-ON FINISH SELF-LUBRICATING GLIDE PAD Glide Pads make adjustments simple, especially when compared to metal-on-metal pads others use FITS MOST DOMESTIC TRUCK FRAMES Fits under factory truck bumper & mounts directly to frame HEAVY DUTY SPRINGS Takes the jerk out of towing and reduces the wear & tear on your brakes, transmission & differential EASY ACCESS GREASE FITTINGS Keeps corrosion to a minimum Accessible grease fittings located at the locking pin & rear pivot point EASY PULL RELEASE HANDLES Releases lock assemblies for easy adjustments to the receiver hitch 2 X 2 RECEIVER HITCH Extends out to 7 & has a 12 swing right or left for easy one-person hookups Also available with a flat bar receiver arm *No applications available for cab & chassis models. Mounting Kits 1,200 LBS TONGUE WEIGHT UP TO 14,000 LBS TOWING CAPACITY H.D. Hitch Frame MUL5210-101 2 Receiver Bar MUL5210-102 Flat Bar MUL5210-103 Mounting Kits Available See Below STAINLESS STEEL FACE PLATE P/N MUL5210-304M LOCKING PIN GLIDE PAD GREASE FITTINGS FLAT TOW BAR OPTION Replacement Parts Available Pull this handle to extend the draw bar an additional 7 Pull this handle to slide the draw bar side to side CHEVY/GMC 07-19 Silverado/Sierra 1500 (19 Old Body) MUL5210-130 99-06 Silverado/Sierra 1500 MUL5210-105 88-00 Silverado/Sierra 1500/2500/3500 MUL5210-104 11-19 Silverado/Sierra 2500/3500 HD MUL5210-113 01-10 Silverado/Sierra 2500/3500 HD Short Bed MUL5210-106 01-10 Silverado/Sierra 2500/3500 HD Long Bed MUL5210-107 DODGE/RAM 09-19 Ram 1500 Single Exhaust w/o Factory Hitch (19 Old Body) MUL5210-116 10-19 Ram 2500/3500 w/ Factory Hitch MUL5210-115 10-19 Ram 2500/3500 w/o Factory Hitch MUL5210-125 03-09 Ram w/ Factory Hitch (09 2500 Only) MUL5210-115 03-09 Ram w/o Factory Hitch (09 2500 Only) MUL5210-125 99-02 Ram MUL5210-108 FORD 15-19 F-150 MUL5210-119 09-14 F-150 w/ Factory Hitch MUL5210-112 04-05 F-150 w/ Factory Hitch w/o Dampener MUL5210-114 87-96 F-150 MUL5210-109 17-19 F-250/F-350/F-450 Super Duty MUL5210-120 99-16 F-250/F-350/F-450 Super Duty MUL5210-111 87-98 F-250/F-350 Super Duty MUL5210-109 TOYOTA 07-13 Tundra w/o Factory Hitch MUL5210-140 Glide Pad Replacement MUL5210-150 Stainless Steel Face Plate MUL5210-304M Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 7 JACKS COUPLERS B-LIGHT ™ BATTERY POWERED TRUCK BED LIGHT P/N TX 1704998 ▪ ▪ No wiring! Just peel, stick and go ▪ ▪ 18 inch super bright LED strip ▪ ▪ Lights up entire pickup truck bed ▪ ▪ Powered by 3-AA batteries (not included) ▪ ▪ Long lasting LED technology ▪ ▪ Mounts anywhere ▪ ▪ Weatherproof *Replacement Jack Parts Also Available* CT 28358 CT 28202 CT 28255 CT 28302 P/N Capacity Wind Travel CT 28320 2,000 lbs. Top 10 CT 28321 2,000 lbs. Side 10 CT 28322 2,000 lbs. Top 15 CT 28324 2,000 lbs. Side 15 CT 28350 5,000 lbs. Top 10 CT 28354 5,000 lbs. Side 10 CT 28356 5,000 lbs. Top 15 CT 28358 5,000 lbs. Side 15 Pipe Mount Swivel Jacks P/N Capacity Wind Bracket Height Travel CT 28202 2,000 lbs. Top 9 15 CT 28204 2,000 lbs. Side 9 14-1/2 CT 28250 5,000 lbs Top 10-1/2 14 CT 28255 5,000 lbs. Top 10-1/2 15 HB 155032 5,000 lbs. Top 10.15 15 A-Frame Jacks P/N Capacity Wind Travel CT 28300 2,000 lbs. Top 10 CT 28302 2,000 lbs. Side 10 CT 28304 2,000 lbs. Top 15 CT 28306 2,000 lbs. Side 15 HB 171401 5,000 lbs. Top 10 Bracket Mount Swivel Jacks CT 28320 ONE step ™ WHEEL CHOCK FLIP ™ JACK FOOT ® ® FAS88-00-6500 Flip 6 Automatic Jack Foot For use with 2-1/4 jacks FAS84-00-4000 Fastway ONEstep (adjustable 16-24) P/N Capacity Wind Bracket Height Travel Wheel Size CT 28101 1,000 lbs. Side 12 11/16 10 6 CT 28155 1,500 lbs. Side 1 1/2 10 Dual 6 Marine Jacks CT 28155 CT 28300 DC 12662-97 DC 12660-97 DC 07678-95 DC 13203-95 DC 12688-95 P/N SAE Class Tongue Load Grs. Load Description CT 25128 1 200 lbs. 2,000 lbs. 1-7/8 Ball, 2 Channel CT 25153 2 500 lbs. 3,500 lbs. 2 Ball, 2 Channel CT 25138 2 500 lbs. 3,500 lbs. 2 Ball, 3 Channel CT 25100 3 700 lbs. 5,000 lbs. 2 Ball, 3 Channel ZINC POSI-LOCK COUPLERS eZ-Latch BALL COUPLERS P/N Description DC 12688-95 Plated, 2 eZ-Latch, G.V.W.R. 10,000 lb. capacity, bolt on channel (Use 48650, adjustable eye channel) DC 12662-97 Primed, 2-5/16 eZ-Latch, G.V.W.R. 21,000 lb. capacity, weld on DC 13203-95 Plated, 2-5/16 eZ-Latch, G.V.W.R. 18,000 lb. capacity, bolt on DC 12660-97 Primed, 2-5/16 eZ-Latch, G.V.W.R. 21,000 lb. capacity, A-frame weld on, with jack hole DC 13205-95 Plated, 2-5/16 eZ-Latch, G.V.W.R. 21,000 lb. capacity, A-frame bolt on, with jack hole DC 07678-95 Plated, 2-5/16 eZ-Latch, G.V.W.R. 20,000 lb. capacity, bolt on channel (Use 48650, adjustable eye channel) CT 25128 CT 25138 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 8 ▪ ▪ Dual color warning ▪ ▪ 12 high-intensity LEDs ▪ ▪ 11 flash patterns ▪ ▪ 12-14 VDC, 0.9 Amps ▪ ▪ 3 Year Warranty ▪ ▪ Compact high intensity LED warning signal ▪ ▪ Amber ▪ ▪ 16 flash patterns ▪ ▪ Synchronization capable ▪ ▪ Optional brackets available ▪ ▪ 12 VDC, 0.5 Amps ▪ ▪ 2 Year Warranty EC 3932A Optional Bezels EC A3931BZB (black) ED A3931BZC (chrome) EC A3932BZB (black) EC A3932BZC (chrome) 3931A/3932A Series SURFACE MOUNT LED HEAD ED3766 Series SAE CLASS I DUAL COLOR SURFACE MOUNT EC 3931A P/N Colors Size EC ED3766AC Amber / Clear 1.07 H x 6.38 W x 1.48 D P/N Length V A LEDs EC 12-20001-E 48 12-24 7.2 16 EC 12-20006-E 60 12-24 11 16 EC 12-20007-E 54 12-24 6.5 10 SAE Class I LED Lightbar ▪ ▪ 48 flash patterns ▪ ▪ 12 color options - Amber, Blue, Clear, Green, Red, AC, AB, RC, BC, AR, RB ▪ ▪ Five LED module options - Warning, Stop-Tail-Turn, Work lamp, Alley Light and Take-Down Light ▪ ▪ Four length options - 48, 54, 60 and 72 ▪ ▪ Seven standard chassis configurations ▪ ▪ Customizable configuration available ▪ ▪ Aluminum chassis, polycarbonate base and lens ▪ ▪ Range of strap mounting accessory kits ▪ ▪ Height: 2.5, width: 11 ▪ ▪ Optional Safety Director (control required) ▪ ▪ 3 Year Warranty 3410 SAE CLASS I LED SAFETY DIRECTOR ™ SYSTEM 12V ∙ 3.0A ∙ 15 cable ∙ in-cab controller ∙ SAE J595 Class I ∙ CE, ECE R10 ∙ 3 year warranty 8 reflective modules with 6 LEDs ∙ Extruded aluminum housing with polycarbonate lens P/N Color Voltage Max Amps Cable Length EC 3410A Amber 12 3.0 15 ▪ ▪ 5590 Combines Reflective and TIR Optic LED modules ▪ ▪ 5580 Reflective LED modules ▪ ▪ 18 selectable flash patterns ▪ ▪ Cigarette plug adapter with on/off & flash pattern switch (magnetic models) ▪ ▪ 12-24 Volt ▪ ▪ 3 Year Warranty 5580 Series SAE CLASS II LED 2.7 AMPS Permanent Mount EC 5590A Amber Dome EC 5590CA Clear Dome Vacuum-Magnet Mount EC 5590A-VM Amber Dome EC 5590CA-VM Clear Dome Permanent Mount EC 5580A Amber Dome EC 5580CA Clear Dome Vacuum-Magnet Mount EC 5580A-VM Amber Dome EC 5580CA-VM Clear Dome 5590 Series SAE CLASS I LED 6.0 AMPS, SYNCHRONIZABLE Reflex ™ 15 LED Minibars Permanent Mount EC 5597A Amber Dome EC 5597CA Clear Dome, Illuminates Amber Vacuum-Magnet Mount EC 5597A-VM Amber Dome EC 5597CA-VM Clear Dome, Illuminates Amber Magnet Mount EC 5597A-MG Amber Dome EC 5597CA-MG Clear Dome, Illuminates Amber ▪ ▪ Combines Reflective and TIR Optic LED modules to optimize focused front/rear warning and wide-angle side warning ▪ ▪ Zero optic lens ▪ ▪ 18 flash patterns and synchronization capable ▪ ▪ Cigarette plug adapter with on/off and flash pattern switches (magnet models) ▪ ▪ 3 Year Warranty Reflex ™ SAE Class I LED, 15 MINIBAR 5597 Series ▪ ▪ Two 3-watt high-intensity LED’s provide exceptional warning ▪ ▪ 16 Flash patterns ▪ ▪ Synchronizable ▪ ▪ Self-adhesive peel & stick mounting (can be secured with screws) ▪ ▪ 3 Year Warranty ▪ ▪ 16 Flash patterns ▪ ▪ Synchronize up to 20 heads, also synchronizes with 3510 surface mount LED ▪ ▪ In-line waterproof driver eliminates the need for a remote power supply, 9 cable ▪ ▪ 4 1-watt high-intensity LEDs ▪ ▪ 2 Head ▪ ▪ Wide Angle ▪ ▪ Plug-In ▪ ▪ 6 1-watt high-intensity LEDs ▪ ▪ 1 Head ▪ ▪ Wide Angle ▪ ▪ Screw-On EC 9014A Amber EC 9014C Clear EC 9022AA Amber EC 9022CC Clear Hide-A-LED ™ Bullet Hide-A-LED ™ P/N Size Color VDC Amps Lumens EC ED0010A 3/4 Amber 12-24 0.7 200 EC ED0011A 2 Amber 12-24 0.7 200 ▪ ▪ Aluminum base, polycarbonate lens ▪ ▪ 8 flash patterns ▪ ▪ 12VDC, 2.4 Amps ▪ ▪ 2 Year Warranty P/N EC 7965A ▪ ▪ Reinforced-nylon base, polycarbonate lens ▪ ▪ 8 flash patterns ▪ ▪ 12-48VDC, 1.5 Amps ▪ ▪ 2 Year Warranty 7965 Series SAE CLASS I LED 7945 Series SAE CLASS II LED P/N EC 7945A Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 9 Round LED PAR36 EC E92013 Six 3-watt LEDs, 12-24 VDC, Rubber PAR36 housing, Warranty: 1 year, 600 Lumens Grote Select ™ LED Flood Lamp GR 64H01-5 600 Lumens 12V – 36V input range, .655A AT 12V; .311A AT 24V ▪ ▪ Five 3-watt LEDs ▪ ▪ 12-24VDC, 1.1A ▪ ▪ Acrylic lens ▪ ▪ Steel mounting bracket ▪ ▪ 4.33 H x 4.33 W x 1.81 D ▪ ▪ 2 Year Warranty ▪ ▪ 750 Raw, 700 Effective Lumens 4 Round Flood Beam EC E92004 4 Square Flood Beam EC E92008 ▪ ▪ Nine 3-watt LEDs ▪ ▪ 12-24VDC, 1.6A ▪ ▪ Acrylic lens ▪ ▪ Steel mounting bracket ▪ ▪ 4.33 H x 4.33 W x 1.77 D ▪ ▪ 2 Year Warranty ▪ ▪ 1350 Raw, 1250 Effective Lumens ▪ ▪ Thirty 3-watt LEDs ▪ ▪ 12-24VDC, 2.2A ▪ ▪ Polycarbonate lens ▪ ▪ Steel mounting bracket ▪ ▪ 4.96 H x 4.96 W x 3.35 D ▪ ▪ 2 Year Warranty ▪ ▪ 2300 Raw, 2100 Effective Lumens ▪ ▪ Six 3-watt LEDs ▪ ▪ 12-24VDC, 1.1A ▪ ▪ Acrylic lens ▪ ▪ Steel mounting bracket ▪ ▪ 4.57 H x 4.57 W x 1.89 D ▪ ▪ 2 Year Warranty ▪ ▪ 800 Raw, 700 Effective Lumens 4 Square Flood Beam EC E92006 4 Square Flood Beam EC E92007 ENTRY-LEVEL LED LAMPS ▪ ▪ Five 3-watt LEDs ▪ ▪ Aluminum heatsink housing and polycarbonate lens ▪ ▪ 12-24V, 1.2A ▪ ▪ 3 Year Warranty P/N Description Lumen Type EC EW2471 Square LED 550 Raw, 500 Effective Flood EC EW2470 Square LED 600 Raw, 550 Effective Spot EC EW2481 Round LED 600 Raw, 600 Effective Flood EC EW2480 Round LED 550 Raw, 500 Effective Spot EC EW2491 Oval LED 550 Raw, 450 Effective Flood EC EW2490 Oval LED 550 Raw, 500 Effective Spot EW2470/EW2480/EW2490 Series LED Worklamps EW2470 Series 3.9 H x 3.3 W x 1.6 D EW2480 Series 3.8 H x 3.3 W x 1.7 D EW2490 Series 3.1 H x 3.9 W x 1.7 D ▪ ▪ Six 3-watt LEDs ▪ ▪ 1000 Raw, 900 Effective ▪ ▪ Aluminum heatsink housing ▪ ▪ Stainless steel mounting bracket ▪ ▪ Polycarbonate lens ▪ ▪ 12-24V, 1.3A ▪ ▪ 2 Year Warranty ▪ ▪ Six 3-watt LEDs ▪ ▪ 30° angle grommet mount included ▪ ▪ Flush or grommet mount ▪ ▪ Aluminum heatsink housing ▪ ▪ Polycarbonate lens ▪ ▪ 12-24V, 1.3A ▪ ▪ 3 Year Warranty EW2411 SERIES Rectangular Flood LED EW2409 SERIES Rectangular Flood LED 2.5 H x 4.4 W x 2.2 D (w/o bracket) 2.4 H x 4.4 W x 2.2 D (w/o bracket) ▪ ▪ Three 3-watt LEDs ▪ ▪ Surface or bracket mount ▪ ▪ Aluminum heatsink housing ▪ ▪ Polycarbonate lens ▪ ▪ 3 Year Warranty P/N Voltage Amps Lumen Type EC EW2402 12-24 0.6A 500 Raw Spot EC EW2403 12-24 0.6A 500 Raw Flood EW2402 SERIES Square LED 2.4 H x 2.4 W x 2.4 D HD HIGH INTENSITY WORK LAMPS ▪ ▪ Six 10-watt LEDs ▪ ▪ High-intensity beam ▪ ▪ Aluminum heatsink housing ▪ ▪ 4.2 H x 6.6 W x 2.5 D ▪ ▪ Toughened glass lens ▪ ▪ 12-24V, 2.7A ▪ ▪ 3 Year Warranty P/N Lumen Type EC EW2301 3000 Raw, 2600 Effective Flood EC EW2300 3100 Raw, 2700 Effective Spot EW2300 Series Rectangular LED EC EW2411 EC EW2409 MAGNETIC RECHARGEABLE LED WORK LAMP P/N VDC RAW LUMENS EFFECTIVE LUMENS ILLUMINATION EC EW2461 12-24 650 600 Clear EC EW2461-CA-NA 12-24 650 600 Clear / Amber EC EW2461-CAMO 12-24 650 600 Clear Dual color CA & CR models feature five operating modes (100% intensity white, 30% intensity white, 100% intensity amber or red, double flash amber or red and quad flash amber or red). ▪ ▪ Five 3-watt LEDs / 10 3-watt LEDs for CA ▪ ▪ Magnetic base, rechargeable Lithium Battery ▪ ▪ CA & CR models feature two flashing modes ▪ ▪ Charge time less than 7 hours ▪ ▪ Run time on battery is 3 to 4 hours ▪ ▪ 1 Year Warranty Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 10 A FULL LINE OF GROTE AND TRUCK-LITE PRODUCTS AVAILABLE Hi Count ® 4” LED Stop/Tail/Turn Lamp Hi Count ® 6” 56-Diode Oval LED Stop/Tail/Turn Lamp SuperNova ® 4” 10-Diode Pattern LED Stop/Tail/Turn Lamp SuperNova ® 6” Oval LED Stop/Tail/Turn Lamp GOOD GOOD BETTER BETTER STOP / TAIL / TURN LAMPS ▪ ▪ Standard female connection accepts all popular plug-in connectors ▪ ▪ Concentric, high-count 24 diode design ▪ ▪ Fits all popular mountings and grommets ▪ ▪ Female pin connection accepts all popular plug-in connectors ▪ ▪ Fits same connections as female incandescent lamps ▪ ▪ Lower amp draw of LEDs allows for use of more lamps without draining vehicle power ▪ ▪ Lens design spreads light for maximum dispersion ▪ ▪ Encapsulant potting for total circuit board protection ▪ ▪ Hermetic lens-to-housing seal ▪ ▪ Advanced Pin Connection System uses tin-plated, solid brass pin terminals ▪ ▪ Advanced pin connection system uses tin-plated, solid-brass terminals ▪ ▪ Encapsulant potting for total circuit board protection ▪ ▪ Male pin termination for maximum moisture and corrosion protection ▪ ▪ Meets specifications for vertical and horizontal mounting GR G4002 Red GR G6002-3 Red GR G6003 Yellow GR 53252 Red GR 53962 Red GR 53963 Yellow LED WORK LAMPS GR G4003 Yellow GR 53253-3 Yellow TRILLIANT ® LED WHITELIGHT ™ WORK LAMP Spot Pattern GR 63571 Flood Pattern GR 63581 Wide Flood Pattern GR 63761 Trapezoid Lighting Pattern GR 63591 Spot Pattern GR 63601 Flood Pattern GR 63611 Trapezoid Lighting Pattern GR 63621 ▪ ▪ 3 x 5 ▪ ▪ 50,000 hour LED WhiteLight ™ ▪ ▪ Greater Lumen output with lower power consumption ▪ ▪ Voltage Amp: 12 V - 1.6A ▪ ▪ 700 Lumens ▪ ▪ 6 x 9 ▪ ▪ Long-lasting, high output LED work lamp ▪ ▪ 2,100 Lumens TRILLIANT ® MINI LED WHITELIGHT ™ WORK LAMP TRILLIANT ® LED WHITELIGHT ™ WORK LAMPS TRILLIANT ® CUBE P/N Termination Beam Pattern Volts Amps 3000 Lumens GR 63F61 Amp Superseal Flood 12 3 GR 63F71 Amp Superseal Wide Flood 12 3 1200 Lumens GR 63981-5 Amp Superseal Flood 10/24 1.4/.7A GR 63991-5 Amp Superseal Wide Flood 10/24 1.4/.7A TRILLIANT ® OVAL P/N Termination Beam Pattern Volts Amps 3000 Lumens GR 63J01 Hard Shell Superseal Flood 12/24 3/1.5 GR 63J11 Hard Shell Superseal Wide Flood 12/24 3/1.5 GR 63J21 Deutsch Flood 12/24 3/1.5 GR 63J31 Deutsch Wide Flood 12/24 3/1.5 ▪ ▪ Quiet operation & consistent light output ▪ ▪ Premium LEDs produce white light that reduces eye fatigue and operator stress ▪ ▪ Rugged design withstands heavy vibration, corrosion, moisture, and dust ▪ ▪ Sophisticated reflector optics put more light on the task GR 64G11-5 Pendant (Near) GR 64G01-5 Pendant (Far) GR 64E01-5 Pinch (Far) GR 64E11-5 Pinch (Near) TRILLIANT ® T26 LED WORK LAMP ▪ ▪ 17.5 Watts of power across 10-48 Volts ▪ ▪ Rugged mechanical design ensures consistent performance & long life in the harshest environments ▪ ▪ Advanced circuit design provides electronically quiet operation; protects against EMI without interfering with other electronic devices ▪ ▪ Clean, white light designed to represent true colors, just like day light ▪ ▪ 1,800 Lumens 3.2 W x 4.97 H (including bracket) 3.65 W x 4.73 H (including bracket) Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 11 BACK-UP ALARMS GROMMET FOR 6 OVAL OR 4 ROUND LAMPS MOUNTING BRACKET FOR OVAL OR 4” ROUND LAMPS SURFACE MOUNT SNAP-IN FLANGE FOR OVAL LAMPS Fits 6 oval or 4 round lamps. Oval fits 2.5 x 6.76 size hole and round fits 4.5 hole. Both fit panel thickness up to 1/4. 90º angle bracket. For use with oval or round lamps. Grommet required for mounting. Allows for quick and easy surface mount application. GR 92420 Oval, Open Back GR 92720 Oval, Closed Back GR 91740 Round, Open Back GR 91950 Round Closed Back GR 43362 90°, Oval, Black GR 43572 90°, 4 Round, Black GR 43952 Z Mount, Black GR 42052 45°, 4 Round, Black GR 42153 Chrome GR 42152 Black Theft-resistant Mounting flanges also available GR 66815 6” Long, Ground Return System, Slim-line .180 Male GR 66816 6” Long, Ground Return System, 90° Plug, Slim-line .180 Male STOP/TAIL/TURN THREE-WIRE PLUG-IN PIGTAILS FOR MALE-PIN LAMPS Dual function for S / T / T lamps. O-ring seal resists moisture and corrosion. Quality ULTRA-BLUE-SEAL ® construction. Grease grooves for additional sealing protection. GR 66842 10” Long, Chassis Ground, Slim-line .180 Male GR 66846 10” Long, Chassis Ground, 90° Plug, Slim-line .180 Male TWO-WIRE PLUG-IN PIGTAILS FOR MALE-PIN LAMPS Straight-in pigtail. Single function. O-ring seal resists moisture and corrosion. Quality ULTRA-BLUE-SEAL ® construction. Grease grooves for additional sealing protection. GR 66836 6 Long, Female Pin to 90° Male Pin Lamp Termination GR 66830 6 Long, Female Pin to Male Pin Lamp Termination ADAPTER PLUGS Female to male pin lamp termination, and male to female pin lamp termination 600 SERIES - Compact and robust design ideal for demanding applications in medium noise environments. Reverse mounted speaker design ensures longer alarm life. P/N SERIES VOLTAGE dB(A) AMPS APPROVALS Warranty EC SA901N 600 12-24 82-107 0.3 CE. e, UL ECCOLIFE ™ Warranty 500 SERIES - Compact size and universal mounting pattern maximizes location options. Self-grounding. P/N SERIES VOLTAGE dB(A) AMPS APPROVALS Warranty EC 530 500 12-24 102 0.9 SAE Type F, CE, e, UL 2-Year EC 510 500 12 97 0.2 SAE Type C, CE, e, UL 2-Year ▪ ▪ Exceeds DOT requirements ▪ ▪ Durable, impact and solvent resistant ▪ ▪ 13 3/4” yellow-orange center for daytime warning ▪ ▪ Outer 1 5/8” red reflex border for nighttime warning ▪ ▪ Material: Acrylic/ABS ▪ ▪ SAE: J943a, ASAE: S276.3 ▪ ▪ Bracket: 43325, 43335 CONSPICUITY TAPE SLOW-MOVING VEHICLE EMBLEM ALTERNATING 7 SILVER/11 RED: GR 40650 2 x 150 Roll GR 40650-5 2 x 18 (5) Strips GR 41160 2 x 150 Roll GR 41080 1 1/2 x 150 Roll ALTERNATING 6 SILVER/6 RED: GR 41050 2 x 150 Roll SILVER: GR 40641 2 x 150 Roll GR 40641-5 2 x 12 (4) Strips, Poly Bag, 10 Year Warranty WHITE: GR 40701 1 x 150 Roll GR 71152 Orange & Red ▪ ▪ Easy installation ▪ ▪ Reflects light even in daytime ▪ ▪ Bright prismatic appearance CONTROLLER ▪ ▪ One-button control of taillight signaling, including: stop, forward, left & right turns, reverse, emergency, flashlight mode ▪ ▪ Digital communications between controller and taillights to avoid interference ▪ ▪ Transmitting distance between controller & taillights up to 100 feet ▪ ▪ Taillight battery low level indicator TAILLIGHTS ▪ ▪ Re-chargeable battery with runtime up to 6 hours ▪ ▪ Led bright red & white lights ▪ ▪ Magnetic mount on the back with 50lb attaching strength ▪ ▪ Rugged construction & safety securing strap ▪ ▪ Weather resistant TM SYSTEM ▪ ▪ Carrying case ▪ ▪ Charging cable ▪ ▪ 1 Year warranty PORTABLE WIRELESS REMOTE CONTROLLED TAILLIGHTS P/N SWHST01 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 12 Group P/N CA @ 32° CCA @ 0° F Mount/Warr. Mo. Res. Cap Min. Core Grp. 4DLT DEK94DLT 1005 850 Top Post/12 mo. 240 LT 4D DEK904D 1280 1050 Flat Top/Top Post/12 mo. 290 4D 8D DEK708D 1340 1100 Top Post/12 mo. 325 8D 8D DEK908DFT 1730 1425 Flat Top/Top Post/12 mo. 440 8D 8D DEK908DFT/T928 1700 1400 T928/12 mo. 430 8D Free Replacement Warranty FEATURES BENEFITS Fiberglass wrapped envelope separators  Locks active material to plate surface Genuine calcium lead alloy  Longer waterless operation & extended battery life Anchor locked elements  Resist vibration & extends service life Heavier, thicker plates  Will not buckle during multiple high cycle usage Group P/N CA @ 32° F CCA @ 0° F Mount Res. Cap Minutes 31 DEK7T31 940 730 Top Stud 190 31 DEKDP31CS 875 700 Top Stud 185 SEVERE SERVICE COMMERCIAL DUAL PURPOSE BATTERIES 24 Month Free Replacement Warranty BATTERIES GROUP 4D & 8D H.D. CONSTRUCTION EQUIPMENT BATTERIES EC K7000B GEMINEYE ™ 7 LCD HIGH RESOLUTION COLOR SYSTEM EC EC5605-WK GEMINEYE ™ 5.6 LCD COLOR 2.4 GH z DIGITAL WIRELESS SYSTEM CAMERA SYSTEMS C2013B Camera EC2014-WC Camera ▪ ▪ Unobtrusive mounting with a large, easily viewable screen ▪ ▪ Excellent picture quality even in low light conditions ▪ ▪ Expandable up to 2 cameras ▪ ▪ 12-24 VDC Operating Voltage ▪ ▪ Touchscreen menu control ▪ ▪ Internal controller ▪ ▪ CMOS infrared 11 LED camera ▪ ▪ Includes monitor sunshade ▪ ▪ Expandable up to 4 cameras ▪ ▪ 1 Year Warranty M7000B Monitor EC5605-WM Monitor The 908DFT is hybrid in construction, anchor bonded, has a flush cover with a dual exhaust port manifold, plus screw in type cell caps similar to our group 31’s. This cover’s design is the countermeasure to lost caps as well as easing the batteries installation into bus, earth-moving and farm equipment applications. Performance Specifications: 12 Month Free Replacement Warranty 12 Month Free Replacement Warranty “FLAT TOP” 8D BATTERY P/N CCA CA RC DEK908DFT 1425 1730 440 The new 904D is hybrid in construction, and includes an accessible flush manifold cover and anchor locked elements. The newly designed cover puts an end to lost cell caps and the new anchor bonding enhances durability. “FLAT TOP” 904D BATTERY Battery Specifications: P/N CCA RC DEK904D 1050 290 Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 13 • • All steel construction for long life • • Rubber pads are adhered with a strong adhesive • • Non-slip ribbed vinyl hand grip • • Lift batteries from 4-1/2 to 7-1/2” wide, including Group 65 batteries EZ EZBK520 “Side” Battery Lifter PROVIDE INSTANTANEOUS POWER STARTING BATTERIES Group 31 Batteries P/N CA @ 32° CCA @ 0° F Mount/Warr. Mo. Res. Cap Min. DEK1031MF 910 760 Top Stud/24 mo. 170 DEK1131MF 1140 950 Top Stud/24 mo. 175 DEK1031PMF 910 760 Top Post/24 mo. 170 DEK1131PMF 1140 950 Top Post/24 mo. 175 DEK1231MF 1230 1000 Top Stud/24 mo. 185 DEK31S925 1135 925 Stud/18 mo. 170 DEK31P925 1135 925 Post/18 mo. 170 24 Month Free Replacement Warranty FEATURES BENEFITS Calcium MF design  Longer shelf life, less water loss,less corrosion, higher CCAs Envelope separators  Protects plates from shorts, extends life De-mineralized acid  Less water loss, gassing & corrosion Anchor bonding  Longer life in high vibration Flush-top manifold cover  No interference with hold down Full frame grids  Resists internal corrosion, delivers highest CCA per pound AGM TECHNOLOGY FOR COMMERCIAL, AUTOMOTIVE, MARINE, OR OFF-ROAD APPLICATIONS FEATURES BENEFITS 100% Maintenance-Free  Eliminates the need to check fluid levels & environmentally friendly Tightly “Packed” AGM  Resistance to shock & vibration to extend battery life AGM Design  Eliminates acid spills, terminal corrosion & lowest internal resistance Faster Recharge  Quicker turnaround times AGM (Absorbed Glass Mat) While most AGM batteries look like and function like your typical flooded lead acid batteries, they have several advantages and require controlled charging techniques so not to damage the battery when charging. (See back for more information on charging AGM Batteries) Why AGM: • • Lower internal resistance provides quick starting power and enhances the efficiency of the vehicle’s electrical system • • Over 2x the cycle life* means better power for electronic loads when key-off power is crucial • • Up to 20x more vibration protection* resists vibration damage for better performance and longer life • • Hard-impacting case and cover resists external damage for extended use • • Tough, stainless steel terminals prevent corrosion for more power and better performance * Compared to conventional designs 24 Month FREE Replacement Warranty 18 Month FREE Replacement Warranty BATTERIES , CONTINUED Starting/Dual Purpose Design Delivers Starting & Dual Purpose Power # DEK9A31 Group 31 CA@ 32°F - 1060 CCA@ 0°F - 925 Mount - Top Stud Reserve Cap. Minutes - 190 Applications: Line Haul/Day Cab, Pick up & Delivery, Vocational Starting/Deep Cycle Design Delivers Starting & Deep Cycle Power # DEK8A31 Group 31 CA@ 32°F - 1000 CCA@ 0°F - 800 Mount - Top Stud Reserve Cap. Minutes - 200 Applications: HVAC, APU, Sleeper, Extra Auxiliary Loads Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 14 We Make Hydraulic Hoses! HOSE TYPE STOCKED: » Hydraulic - 2 or 4 Wire » Stainless Steel » Suction » A/C » Cloth Braided - Single Wire DESERT ™ HR4 LOW PRESSURE HOSE SAE 100R4 Meets Flame Resistance USMSHA Designation SUCTION/RETURN LINE HYDRAULIC HOSE P/N Hose Size Inch Max. Working Pressure Min. Bend Inch Min. Burst PSI GX HR4-12X100CL 3/4 300 2.5 1200 GX HR4-16X100CL 1 250 3.0 1000 GX HR4-20X100CL 1-1/4 200 4.0 800 GX HR4-24X100CL 1-1/2 150 5.0 600 P/N Hose Size Inch Max. Working Pressure Min. Bend Inch Min. Burst PSI GX XR16SC-04X250RL 1/4 5800 2.0 23200 GX XR16SC-06X250RL 3/8 5000 2.5 20000 GX XR16SC-08X250RL 1/2 4500 3.5 18000 GX XR16SC-10X250RL 5/8 4000 4.0 16000 GX XR16SC-12X250RL 3/4 3500 5.0 14000 GX XR16SC-16X250RL 1 2700 6.0 10800 Compatible fitting options: • • UC fitting w/UCF-6 Collars • • Hose barb fittings w/clamps Compatible fitting options: • • B2 Series crimp fittings Application: Low pressure, high temperature return line or suction line for petroleum and water-based hydraulic fluids Inner Tube: Nitrile Reinforcement: Spiral-plied synthetic fabric with wire helix Cover: Black neoprene Temperature Range: -40°F to 275°F Fittings: 2 Piece Crimpable Application: High pressure service with tight bends for petroleum and water based hydraulic fluids. Excellent impulse performance and flexibility exceeding SAE 100R2 and SAE 100R16 standards Inner Tube: Nitrile Reinforcement: Two braids of high-tensile steel wire Cover: Black neoprene Temperature Range: -40°F to 212°F PRESSURE LINES XR16SC HIGH PRESSURE HOSE SAE 100R16/857 2SC Meets Flame Resistance USMSHA Designation • Meets Higher EN/DIN Pressures We stock a complete line of hose & fittings - Please reference our Hydraulics Catalog for complete details! WANT TO MAKE YOUR OWN HOSES? Ask us about our changeover/new setup program Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA== 00Agricultural Catalog130003222021 15 World American C & G Pumps are known for their ruggedness, reliability and interchangeability. Available in both the 101 Remote Mount and the 102 Direct Mount configurations and C or G frames, these pumps offer cast iron construction, a variety of displacements and “Air Shift” capabilities. Walking Floor dual pressure 2000 psi for dump bodies, and 3000 psi for live floor trailers. Pressure switching is controlled from the air supply of the truck. Heavy duty roller bearing construction. Standard with air shift and mounting hardware. MW1WAP101-25AS Remote Mount, Air Shift MW1WAP102-25L Direct Mount w/o Air Shift MW1WAP102-25LAS Direct Mount with Air Shift MW1WAWFDPUMP Dual Pressure Pump MW1WAPBK-1001 6-Bolt Dump Pump Mounting Bracket MW1WAPBK-1000 8-Bolt Dump Pump Mounting Bracket DUMP PUMPS & WALKING FLOOR PUMPS PTO/Wet Line Kits WA06 Series WA08 Series The WA06 series PTO has been designed to work with most of the existing transmissions in the market. It is a very durable PTO with a wide range of input gears, shifters, speed ratios and output shafts to meet market applications. The WA08 PTO is our WA06 PTO with the ability to mount on the 8 Bolt Transmission opening. This design uses no adapter plates and cuts down on leaks and installation time. It has an “A” ratio that is not offered in the WA06 model. It is a very durable PTO with a wide range of input gears, shifters, speed ratios and output shafts to meet market applications. POWER TAKE-OFF UNITS Power Take-Off Units ∙ PTO Controls & Accessories ∙ Tanks Hydraulic Hose & Fittings ∙ Couplers ∙ In-Line Filter Kits Dump Pumps & Walking Floor Pumps ∙ Gear Pumps & Motors Clamps ∙ Gaskets ∙ Steel Spacers & More! Walking Floor Pumps Gear Pumps & Motors Hotshift PTO Hydraulic Tank & Mounts Dump Pumps Towers & Controllers Hose Kits w/ Fittings Power Take-Off Units Metric Stud Kit MW1WA20-03-1060 Metric Stud Kit MW1WA20-03-1056 We Carry a Full Line of Tanks, Fittings, Controllers and Accessories for all your PTO/Wet Line Kit Needs Made with FlippingBook RkJQdWJsaXNoZXIy MTEyNjY3NA==